Contents COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Safety precautions Preparation 1 Confirm which remote control you have ...... 3 2 Inserting the batteries ................................... 3 3 Connecting the aerial and external devices ... 4 4 Connecting the power cord ........................ 6 5 SETUP TOUR ..............................................
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable.
Preparation 1 Confirm which remote control you have RM-C360GY POWER SYSTEM COLOUR SOUND TV/VIDEO OFF TIMER PICTURE MODE 1 2 3 4 5 6 7 CHANNEL RETURN+ SCAN DISPLAY 8 9 0 -/-MUTING MENU CHANNEL VOLUME REMOTE CONRTOL UNIT RM-C360GY 2 Inserting the batteries Correctly insert two batteries, observing the , and . polarities and inserting the . end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries.
Preparation 3 Connecting the aerial and external devices • For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).
Preparation ■ Connecting other external devices To audio output VIDEO AUDIO To video output VCR (for playing) IN OUT VCR (for recording) To audio input To video input • Illustration of AV-2106TE. To video output Camcorder To audio output or TV game MENU VIDEO IN AUDIO Headphones • Illustration of AV-2106TE. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.
Preparation 4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV. 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. • In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 14.
Basic operation 1 Press the POWER button to turn your TV on. POWER SYSTEM COLOUR SOUND TV/VIDEO OFF TIMER PICTURE MODE 1 2 3 4 5 6 7 8 9 0 -/-- CHANNEL RETURN+ SCAN • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button - the Number buttons - the TV/VIDEO button 2 Select a channel.
Remote control buttons and functions PICTURE MODE button You can select one of three picture adjustment settings as you like. Press this button to select a mode. BRIGHT: Heightens contrast and sharpness. In VIDEO mode: AUTO PAL NTSC4.43 SECAM NTSC3.58 AUTO: Automatic colour system selection. SOFT: Softens contrast and sharpness. • For the colour systems in each country or region, see the table“Broadcasting systems” on page 20.
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current channel number or VIDEO mode on the screen. You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view. Press this button. To turn the display off, press this button again. • When selecting a channel or VIDEO mode with no input signal, indication of selected channel or VIDEO mode becomes fixed on the screen.
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s 2 Repeatedly press the MENU T buttons to display a desired menu. • If you hold down the y button, the next menu is displayed. • If the selected function is on the first line, pressing the r button displays the preceding menu. 3 Repeatedly press the MENU T buttons to select a desired function. 4 Press the MENU M buttons to change function settings.
Using the TV’s menus ON TIMER Your TV will automatically turn on and tune into the channel you set after the period of time you set. 1 Press MENU T to display the “MENU 1” menu, then select “ON TIMER”. MENU INPUT ON TIMER PR 1 VNR 1 TV 0:00 OFF Channel No. OPERATE BY VOL-+ SELECT BY EXIT BY DISPLAY PROGRAM BY -+ When the time set for the ON TIMER function is reached: The TV automatically turns on and the channel set for the ON TIMER function is displayed.
Using the TV’s menus VNR (Video Noise Reduction) CHILD LOCK You can reduce the picture noise. You can disable the front control buttons of the TV. When this function is set to “ON”, the TV can be operated using only the remote control. Use this function to prevent children from operating the TV without parental consent. 1 Press MENU T to display the “MENU 1” menu, then select “VNR”.
Using the TV’s menus BLUE BACK You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “BLUE BACK”. MENU AUTO SHUTOFF CHILD LOCK BLUE BACK 2 ON ON ON SELECT BY OPERATE BY -+ EXIT BY DISPLAY 2 Press MENU M to select “ON”. To cancel the BLUE BACK function, select “OFF”.
Using the TV’s menus SETUP TOUR AUTO CH PRESET You can start the SETUP TOUR function. You can automatically preset all TV channels that can be received by your TV to channels. 1 Press MENU T to display the “MENU 3” menu, then select “SETUP TOUR”. MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH SELECT BY OPERATE BY -+ MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH EXIT BY DISPLAY 2 Press MENU M. JVC logo is appear and the SETUP TOUR function will start.
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV channels to desired channels. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. MANUAL FINE SKIP SOUND SYSTEM EXIT NO B/G 2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen. EXIT BY DISPLAY 2 Press MENU M. The sub-menu is displayed. MANUAL FINE SKIP SOUND SYSTEM EXIT 1 Press MENU t to select “FINE”.
Using the TV’s menus SKIP Picture Adjustments You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. You can adjust the picture as you like. • Channels to which TV channels have not been preset are automatically set to be skipped. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. 2 Press MENU M. The sub-menu is displayed. 3 Press MENU T to select “SKIP”.
Using the buttons on the TV The following illustrations are of only some models are shown for explanation purpose only. Your TV may not be exactly the same as illustrated. 1 MENU button ON TIMER MENU 1 CHANNEL VOLUME EXIT 2 3 9 • MENU button 2 CHANNEL –/+ buttons • MENU m buttons 3 VOLUME –/+ buttons POWER 5 6 • EXIT from MENU buttons 4 Remote control sensor 5 ON TIMER lamp 8 MENU CHANNEL The light is switched on while ON TIMER function is operating.
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 12. You can operate functions in menus using the front control buttons on the TV. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press MENU y repeatedly to display the menu you want to use. 2 Press CHANNEL M to select a channel.
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Connect the power cord to the AC outlet. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Adjust the picture settings. (see page 16.
Specifications TV RF systems B, G, I, D, K, K1 Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz (in VIDEO mode only) Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output INPUT: OUTPUT: Headphone jack: VIDEO input (RCA), AUDIO input (RCA) VIDEO output (RCA), AUDIO output (RCA) stereo mini jack (3.
Contents COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Safety precautions Preparation 1 Confirm which remote control you have ...... 3 2 Inserting the batteries ................................... 3 3 Connecting the aerial and external devices ... 4 4 Connecting the power cord ........................ 6 5 SETUP TOUR ..............................................
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable.
Preparation 1 Confirm which remote control you have RM-C360GY POWER SYSTEM COLOUR SOUND TV/VIDEO OFF TIMER PICTURE MODE 1 2 3 4 5 6 7 CHANNEL RETURN+ SCAN DISPLAY 8 9 0 -/-MUTING MENU CHANNEL VOLUME REMOTE CONTROL UNIT RM-C360GY 2 Inserting the batteries Correctly insert two batteries, observing the , and . polarities and inserting the . end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries.
Preparation 3 Connecting the aerial and external devices • For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).
Preparation ■ Connecting other external devices To audio output VIDEO To video output VCR (for playing) AUDIO IN (VIDEO - 1) OUT VCR (for recording) To audio input To video input • Illustration of AV-14A16. Camcorder or TV game To video output To audio output VIDEO IN AUDIO MENU CHANNEL • Illustration of AV-14A16. Headphones • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.
Preparation 4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV. 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. • In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 13.
Basic operation 1 Press the POWER button to turn your TV on. POWER SYSTEM COLOUR SOUND TV/VIDEO OFF TIMER PICTURE MODE 1 2 3 4 5 6 7 8 9 0 -/-- CHANNEL RETURN+ SCAN • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button - the Number buttons - the TV/VIDEO button 2 Select a channel.
Remote control buttons and functions PICTURE MODE button You can select one of three picture adjustment settings as you like. Press this button to select a mode. BRIGHT: Heightens contrast and sharpness. STANDARD: Standardizes picture adjustments. SOFT: Softens contrast and sharpness. • Pressing this button returns all the picture settings in the “MENU 4” to their default settings.
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current channel number or VIDEO mode on the screen. You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view. Press this button. To turn the display off, press this button again. • When selecting a channel or VIDEO mode with no input signal, indication of selected channel or VIDEO mode becomes fixed on the screen.
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 2 Repeatedly press the MENU T buttons to display a desired menu. POWER SYSTEM COLOUR SOUND TV/VIDEO OFF TIMER 1 2 3 4 5 6 7 8 9 0 -/-- CHANNEL RETURN+ SCAN DISPLAY button • If you hold down the y button, the next menu is displayed.
Using the TV’s menus ON TIMER Your TV will automatically turn on and tune into the channel you set after the period of time you set. 1 Press MENU T to display the “MENU 1” menu, then select “ON TIMER”. MENU INPUT ON TIMER PR 1 VNR 1 TV 0:00 OFF Channel No. OPERATE BY VOL-+ SELECT BY EXIT BY DISPLAY PROGRAM BY -+ When the time set for the ON TIMER function is reached: The TV automatically turns on and the channel set for the ON TIMER function is displayed.
Using the TV’s menus VNR (Video Noise Reduction) CHILD LOCK You can reduce the picture noise. You can disable the front control buttons of the TV. When this function is set to “ON”, the TV can be operated using only the remote control. Use this function to prevent children from operating the TV without parental consent. 1 Press MENU T to display the “MENU 1” menu, then select “VNR”.
Using the TV’s menus SETUP TOUR AUTO CH PRESET You can start the SETUP TOUR function. You can automatically preset all TV channels that can be received by your TV to channels. 1 Press MENU T to display the “MENU 3” menu, then select “SETUP TOUR”. MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH SELECT BY OPERATE BY -+ MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH EXIT BY DISPLAY 2 Press MENU M. JVC logo is appear and the SETUP TOUR function will start.
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV channels to desired channels. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. MANUAL FINE SKIP SOUND SYSTEM EXIT NO B/G 2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen. EXIT BY DISPLAY 2 Press MENU M. The sub-menu is displayed. MANUAL FINE SKIP SOUND SYSTEM EXIT 1 Press MENU t to select “FINE”.
Using the TV’s menus SKIP Picture Adjustments You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. You can adjust the picture as you like. • Channels to which TV channels have not been preset are automatically set to be skipped. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. 2 Press MENU M. The sub-menu is displayed. 3 Press MENU T to select “SKIP”.
Using the buttons on the TV MENU CHANNEL VOLUME POWER / ON TIMER EXIT 3 2 1 4 7 8 MENU CHANNEL VOLUME POWER / ON TIMER EXIT 1 3 2 4 7 8 1 MENU button • MENU button 2 CHANNEL m buttons • MENU m buttons 3 VOLUME m buttons • EXIT from MENU buttons 4 Remote control sensor 5 ON TIMER lamp The light is switched on while ON TIMER function is operating. 6 POWER lamp When the Main power is on, the light is red.
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 12. You can operate functions in menus using the front control buttons on the TV. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press MENU y repeatedly to display the menu you want to use. 2 Press CHANNEL M to select a channel.
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Connect the power cord to the AC outlet. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Adjust the picture settings. (see page 15.
Specifications TV RF systems B, G, I, D, K, K1 Colour systems PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz (in VIDEO mode only) Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output INPUT: OUTPUT: Headphone jack: VIDEO input (RCA), AUDIO input (RCA) VIDEO output (RCA), AUDIO output (RCA) stereo mini jack (3.
GGT0106-001A-H_Cover 2 16/1/06, 5:48 PM