COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents AV-21M335 AV-21M315 AV-21V315 Knowing your TV’s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions ........................................................... 6 Setting up your TV ..................................................................... 7 Basic setting for picture ........................................
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug.
Knowing your TV’s features Main features DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. EXIT TV detects the brightness of your room and automatically adjust the picture brightness to a suitable level for a better eye care.
Remote control buttons and basic functions No. 1 2 3 4 5 6 7 8 9 ! " Press POWER MENU/OK 5/∞/2/3 CHANNEL -/+ VOLUME -/+ TV/VIDEO EXIT MUTING DISPLAY /BACK To Turn on or off the TV from standby mode. Display menu and confirm selected function. Select and adjust menu function. Select the desired channel number. Adjust the volume level. Select TV or video terminal input. On the other hand, you can use this button to EXIT from the menu. Turn off the volume. Press this button again to resume the volume.
Remote control buttons and basic functions (continued) How to operate menus and menus locations To Display the MENU Operation Press the MENU/OK button 2. Note To exit the MENU, press the DISPLAY/ BACK button 8 or choose EXIT menu or TV/VIDEO/EXIT button 6. Display the top Press 5/∞ buttons 3 to choose a Press ∞ button 3 to menu menu title. Then press MENU/OK display the next page button 2. for more functions. Display the 2nd Press 5/∞ buttons 3 to choose a menu menu title. Then press MENU/OK button 2.
TV buttons and functions The illustrations shown below is for AV-25V315 and AV-21M335 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. No.
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. 3 Inserting batteries into the remote control. Insert two batteries by following the + and polarities and inserting the - end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries.
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE AUTO PROGRAM ENGLISH Vieät CC 12 22% MENU : OK DISPLAY : BACK TV/VIDEO : EXIT AUTO PROGRAM EDIT MENU : OK PR AV 1 2 3 4 5 6 CH/CC ■ ■ ■ ■ CH 04 CH 76 CH 78 CH 05 CH 28 CH 10 MENU : OK MOVE ✵ • Press 5/∞ button to select your desired language. • TV will start searching for the channels.
Basic setting for picture COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO PAL SECAM NTSC3.58 NTSC4.43 You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting.
Basic setting for picture (continued) PICTURE SETTING WHITE BALANCE You can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ MENU USER PICTURE menu PICTURE MODE ❇ MENU 2 Select the PICTURE SETTING in PICTURE menu, then adjust the setting. ❇ MENU CONTRAST BRIGHT SHARP COLOUR TINT* You can change the white balance of the picture to better match the type of video being viewed.
Advanced setting for picture AI ECO SENSOR (ECO) BLUE BACK You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. OFF MODE-1 MODE-2 DISPLAY Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. Cancel the function. Mild contrast (recommended). Even contrast.
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I D/K ❇ MENU M This function is not available in video mode. For the sound system in each country or region, see the table below: Area Asia, Middle East Europe Oceania Africa Country or Region Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc.
Advanced setting for sound EQUALIZER ❇ MENU SOUND menu SOUND menu SOUND MODE USER 2 Select the EQUALIZER in SOUND menu. ❇ MENU SOUND menu EQUALIZER The following display appears. CINEMA SURROUND EQUALIZER When you select to VIDEO-2. You cannot adjust CINEMA SURROUND function. You can adjust it in DVD Menu. 100 SUPER BASS (BASS) 300 1K IIIIIIII This function is not available when the SOUND MODE is set to SOUND TURBO.
DVD function WHITE BALANCE AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will be changed to VIDEO-2 automatically. For The DVD player, press the “POWER ON” button of the machine so that the signal can be detected. For the VCR, press the “POWER ON” button of the machine, and then press the “PLAY” button, so that the signal can be detected and display DVD menu. Select the AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).
Customized setting OFF TIMER VNR You can reduce the picture noise. Select the VNR in the PICTURE menu, then choose a setting of VNR function. ❇ MENU PICTURE menu OFF AUTO MIN MAX VNR is turned off. Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level. When you select to VIDEO-2. You cannot adjust VNR function. LANGUAGE You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language.
Customized setting (continued) DISPLAY VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal. Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT). You can display the programme number, video terminal number and PR list on the screen.
TV channel presetting To register the TV channels automatically (AUTO PROGRAM) 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. EDIT You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. ❇ MENU PR AV 1 2 3 4 5 6 INSTALL menu 2 Choose AUTO PROGRAM, then press the MENU/OK button. To edit the channel list If a channel is not registered To exit the menu Proceed to the Step 3 of “To edit the channel list (PR LIST)” on page 18.
TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. 1 Display the INSTALL menu. ❇ MENU INSTALL menu 2 Choose EDIT/MANUAL, then press the MENU/OK button.
TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. US CCIR OIRT AUSTRALIA Country United States, Philippines, etc.. Middle East, Southeast Asia, etc.. Eastern Europe, Russia, Vietnam, etc.. Australia, etc..
Additional preparation The illustrations shown in this section are for AV-25V315 and AV-21M335 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied.
Additional preparation (continued) Attaching the Twin Port Bass Blaster Unit The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster unit correctly on the TV. • The SUPER BASS (BASS) function do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS (BASS) function, see page 13.
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, no sound • • • • • • • • • • • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12. Snowy picture • Check the aerial cable and its connection with the TV.
Specifications Model TV RF system Colour system (RF mode and VIDEO mode) Channel and Frequencies Power input Power consumption Screen size (Measured diagonally) Audio output (Rated power output) Speaker AV-21M335 AV-21M315 AV-21V315 AV-25M335 B, G, I, D, K, M AV-25M315 AV-25V315 PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz VHF low channel (VL) : 46.25 to 140.25 MHz VHF high channel (VH) : 147.25 to 423.25 MHz UHF channel (U) : 431.25 to 863.
0705-FLE-JMT © 2005 Victor Company of Japan, Limited GGT0073-001A-H-EN 24 01/07/2005, 5:43 PM
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents AV-21M535 AV-21M515 AV-21M315 AV-21V315 Knowing your TV’s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions ........................................................... 6 Setting up your TV ..................................................................... 7 Basic setting for picture ..............................
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug.
Knowing your TV’s features Main features DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. A2/NICAM (STEREO / I II) You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 or NICAM Sound-multiplex system.
Remote control buttons and basic functions No. 1 2 3 4 5 6 7 8 9 ! " Press POWER MENU/OK 5/∞/2/3 CHANNEL -/+ VOLUME -/+ TV/VIDEO EXIT MUTING DISPLAY /BACK To Turn on or off the TV from standby mode. Display menu and confirm selected function. Select and adjust menu function. Select the desired channel number. Adjust the volume level. Select TV or video terminal input. On the other hand, you can use this button to EXIT from the menu. Turn off the volume. Press this button again to resume the volume.
Remote control buttons and basic functions (continued) How to operate menus and menus locations To Display the MENU Note To exit the MENU, press the DISPLAY/ BACK button 8 or choose EXIT menu or TV/VIDEO/EXIT button 6. Display the top Press 5/∞ buttons 3 to choose a Press ∞ button 3 to menu menu title. Then press MENU/OK display the next page button 2. for more functions. Display the 2nd Press 5/∞ buttons 3 to choose a menu menu title. Then press MENU/OK button 2.
TV buttons and functions The illustrations shown below is for AV-21M535 and AV-21V315 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. No.
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. 3 Inserting batteries into the remote control. Insert two batteries by following the + and polarities and inserting the - end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries.
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE AUTO PROGRAM ¿“…“‰∑¬ CC 12 22% MENU : OK DISPLAY : BACK TV/VIDEO : EXIT AUTO PROGRAM EDIT ENGLISH MENU : OK PR AV 1 2 3 4 5 6 CH/CC ■ ■ ■ ■ CH 04 CH 76 CH 78 CH 05 CH 28 CH 10 MENU : OK MOVE • Press 5/∞ button to select your desired language. • TV will start searching for the channels.
Basic setting for picture For the colour system in each country or region, see the table below: COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. In TV mode: AUTO PAL Area Asia, Middle East SECAM Europe Oceania AUTO PAL SECAM NTSC4.43 NTSC3.58 In VIDEO mode: AUTO PAL SECAM NTSC4.43 NTSC3.
Basic setting for picture (continued) PICTURE SETTING WHITE BALANCE You can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ MENU USER PICTURE menu PICTURE MODE ❇ MENU 2 Select the PICTURE SETTING in PICTURE menu, then adjust the setting. ❇ MENU CONTRAST BRIGHT SHARP COLOUR TINT* You can change the white balance of the picture to better match the type of video being viewed.
Advanced setting for picture AI ECO SENSOR (ECO) BLUE BACK You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. OFF MODE-1 MODE-2 DISPLAY Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. Cancel the function. Mild contrast (recommended). Even contrast.
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I * D/K * You can choose the desired sound setting. Select the SOUND MODE in SOUND menu, then choose the setting. ❇ MENU * M SOUND menu SOUND MODE USER * The sound system of I, D/K and M are not available for 315 series. This function is not available in video mode.
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF ON Cancel the function. Listen to sound with wider audience effect. You can adjust the sound level of each frequencies when selecting USER mode in SOUND MODE. 1 Select the USER in SOUND MODE under SOUND menu. ❇ MENU SOUND menu SOUND MODE This function is not available when the SOUND MODE is set to SOUND TURBO.
DVD function WHITE BALANCE AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will be changed to VIDEO-2 automatically. For The DVD player, press the “POWER ON” button of the machine so that the signal can be detected. For the VCR, press the “POWER ON” button of the machine, and then press the “PLAY” button, so that the signal can be detected and display DVD menu. Select the AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).
Customized setting OFF TIMER VNR You can reduce the picture noise. Select the VNR in the PICTURE menu, then choose a setting of VNR function. ❇ MENU PICTURE menu OFF AUTO MIN MAX VNR is turned off. Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level. When you select to VIDEO-2. You cannot adjust VNR function. LANGUAGE You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language.
Customized setting (continued) DISPLAY VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal. Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT). You can display the programme number, video terminal number and PR list on the screen.
TV channel presetting To register the TV channels automatically (AUTO PROGRAM) 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. EDIT You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. ❇ MENU PR AV 1 2 3 4 5 6 INSTALL menu 2 Choose AUTO PROGRAM, then press the MENU/OK button. To edit the channel list If a channel is not registered To exit the menu Proceed to the Step 3 of “To edit the channel list (PR LIST)” on page 18.
TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. 1 Display the INSTALL menu. ❇ MENU INSTALL menu 2 Choose EDIT/MANUAL, then press the MENU/OK button.
TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. US CCIR OIRT AUSTRALIA Country United States, Philippines, etc.. Middle East, Southeast Asia, etc.. Eastern Europe, Russia, Vietnam, etc.. Australia, etc..
Additional preparation The illustrations shown in this section are for AV-21M535 and AV-21V315 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Connecting to rear component/video input terminal and output terminal Rear of TV Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied.
Additional preparation (continued) Attaching the Twin Port Bass Blaster Unit The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster unit correctly on the TV. • The SUPER BASS (BASS) function do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS (BASS) function, see page 13.
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, no sound • • • • • • • • • • • • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12. Snowy picture • Check the aerial cable and its connection with the TV.
Specifications Model AV-21M315 AV-21V315 AV-25M315 TV RF system B, G Colour system (RF mode) PAL, SECAM (VIDEO mode) PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and Frequencies VHF low channel (VL) : 46.25 to 140.25 MHz VHF high channel (VH) : 147.25 to 423.25 MHz UHF channel (U) : 431.25 to 863.
Specifications Model AV-21M515 AV-25M515 AV-21M535 TV RF system B, G, I, D, K, M Colour system (RF mode) PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz (VIDEO mode) Channel and Frequencies VHF low channel (VL) : 46.25 to 140.25 MHz VHF high channel (VH) : 147.25 to 423.25 MHz UHF channel (U) : 431.25 to 863.
