COLOUR TELEVISION Contents AV-21WMG5 Knowing your TV’s features ........................... 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV ........................................ 6 Basic setting for picture ................................. 8 Advanced setting for picture .......................... 9 Basic setting for sound ................................ 10 Advanced setting for sound ........................
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug.
Remote control buttons and basic functions 1 6 9 0 8 2 3 7 5 4 RM-C1261 No. Press To 1 2 3 4 5 6 7 8 POWER MENU/OK 5/∞/2/3 CHANNEL M VOLUME M TV/VIDEO MUTING DISPLAY /BACK 9 0~9, -/-- 0 RETURN, Turn on or off the TV from standby mode. Display menu and confirm selected function. Select and adjust menu function. Select the desired channel number. Adjust the volume level. Select TV or VIDEO terminal input. Turn off the volume. Press this button again to resume the volume.
Remote control buttons and basic functions How to operate menus and menu locations TO Display the MENU. Operation Press the MENU/OK button 2. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Return to the previous Press the DISPLAY/BACK button* 8. menu.
TV buttons and functions Front of the TV 9 8 7 6 5 43 2 1 AV-21WMG5 POWER VIDEO AUDIO IN (VIDEO-2) MENU OK CHANNEL VOLUME Rear of the TV AV-21WMG5 VIDEO-1 INPUT OUTPUT VIDEO AUDIO =- No. Button/terminal 1 I (main power) 2 Power lamp 3 4 5 6 7 8 9 0 = Not Application Remote control sensor VOLUME M CHANNELM MENU IN (VIDEO-2) OUTPUT VIDEO-1 INPUT 0 Description Press to turn on or turn off the TV’s main power. Indicate the TV is being turned on or off.
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial VHF/UHF outdoor aerial Rear of the TV VIDEO-1 INPUT 2 Connecting the compatible main plug to the AC outlet. OUTPUT VIDEO AUDIO If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable and audio cables.
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE ENGLISH êìëëäàâ FRANAIS 7 • Press 5/∞ button to select your desired language. ≠ • Press the red button to cancel the SETUP TOUR RESTART function.
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO PAL SECAM NTSC4.43 NTSC3.58 To operate this function with a menu: For the colour system in each country or region, see the table below: Asia, Middle East Europe Oceania Africa Country or Region Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. ❇ MENU INSTALL BLUE BACK If you wish to continue viewing the poor picture, cancel the BLUE BACK function. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4.
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I D/K M The function is not available in video mode. For the sound system in each country or region, see the table below: Area Asia, Middle East Europe Oceania Africa Country or Region Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.
Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01- 99) you desired to register. 2 Press and hold a colour button for 3 seconds or more. “FAVORITE CHANNEL 7 PROGRAMMED!” appears on the screen and current channel is registered. 3 To register other favorite channels, repeat Step 1 to 2. To recall the favorite channel, press the colour button.
Customized setting VNR You can reduce the picture noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ MENU VNR OFF AUTO MIN MAX PICTURE PICTURE FEATURES VNR is turned off. Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original picture is sharp. LANGUAGE You can choose your desired on screen display language.
TV channel presetting To register the TV channels automatically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. INSTALL ❇ MENU 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically. 3 “SETUP TOUR RESTART?” appears. To start the SETUP TOUR To skip the SETUP TOUR Press the MENU/OK button.
TV channel presetting To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on this page. 1 Display the INSTALL menu. INSTALL ❇ MENU 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
Additional preparation Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied.
Specifications TV RF systems B/G, I, D/K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz Power consumption 63 W External input / output VIDEO-1: VIDEO-2: VIDEO input, AUDIO input VIDEO input, AUDIO input* (*You can choose to connect one of AUDIO input jacks) VIDEO output, AUDIO output stereo mini jack (3.
