Manual

Remote Programming
Setting the CATV & VCR Codes
You can program your remote to operate your cable box or satellite receiver by using the instructions
and codes listed below, If the equipment does not respond to any of the codes listed below or to the
I search code function, use the remote control supplied by the manufacturer.
Cable Box or Satellite setup (TV models AV-20120, AV-20121, and AV-27120 only)
The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up,
channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAYbutton.
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function at the bottom of the page.
CABLEBOXES CODES
_BC 024
_,rcher 032,025
3ableview 051,032
.3itizen 022,051
_urtis 058p059
_iamond 024,032, 025
029
--astern 034
3C Brand 032, 051
3emini 022, 043
3eneralIn_urt'e_ 065, 024, 025, 026, 027, 020,
021,022, 057, 023
4amlin 040, 041,042, 045
4itaehi 049, 024
Jerrold 065, 024, 025, 026, 027, 020,
021p022, 057, 023
_acom 049, 050, 051,054
_agnavox 033
_emorex 030
Vlovietime 032, 051
3ak 039_037, 048
=anasonic 055, 056, 060
=aragon 063
_hilips 028, 029, 030,052, 053,031,
069
;Pioneer 047, 062
_P_sa r 051,032
CABLEBOXES CODES
Puser 032
RCA 061,070
Realistic 032
Regal 058,064,040,041,042,045,
068
Regency 034
Rembrandt 037,032,051,038
Samsung 051
ScientificAtlanta 057,058,059
SLMark 051,047
Sprucer 051,056
Stargate 032,051
Telecaption 067
Teteview 047,051
Texscan 044
Tocom 035, 036,066
Toshiba 050
Unika 032, 025
Universal 022, 032
Videoway 052
Viewstar 029, 030
Zenith 063, 046
Zenith/Drake 046
Satellite
DIGITAL CODES
SATELLITE
SYSTEMS
Echostar t00
GE. 106
_Gradiente 112
Hitachi 104,111
HNS (Hughes) 104
Panasonic 105
102,103
Primestar 108
RCA 106,109,110
lO7
Toshiba 101
Uniden 102,103
Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV POWERand RETURN+buttons. Hold for at least three seconds and release.
3) Press TV POWER, see if the CATV or Satellite box responds.
4) If there was a response, press RETURN+.The operating codes are now set. If there was no response,
repeat Step 3. If you repeat Step 3 more than 70 times without a response, use the remote control which
came with the equipment.