Manual

Auto Tuner Setup

In Auto Tuner Setup, the TVautomatically scans

through all available channels, memorizing the active

ones and skipping over blank ones or channels with

weak signals. This means when you scan (using the

CHANNEL 4-/- buttons) you will receive only clear,

active channels.

Press the MENUbutton

AV TOAUTO TUNER SETUP

• • To operate

START I

To choose CABLE or AIR

To move to START

To start Auto Tuner Setup

NOW PROGRAMNIN6 !

I,I,I,_I,H,

Programming will take approximately 1 to 2

minutes.

....

• Noise Muting will not work during Auto Tuner

Setup.

Initial Setup 13

Channel Summary

Channel Summary allows you to customize the

line-up of channels received by your T_ You can

add or delete channels from the line-up or

prevent any unauthorized viewers from watching

any or all 181 channels.

Press the MENUbutton

&V To CHANNEL SUMMARY

• • To operate

The Channel Summary screen (below) will now be

displayed with the channels set to scan marked

with an "X". You can delete channels from the

scan by removing the "X". If any channels were

missed during Auto Tuner Setup and you wish to

add them, you may by placing an "X°next to the

channel number

i: It

&V To the ADD column

• • To include or delete from scan

Exit when finished

NOTES:

Some cable systems experienceinterference from radiofrequencieson cable Channel 95. Youmay delete thischannelfrom

yourscan by removing the "X"next toit on the Channel Summaryscreen.