FE English 5/13/02 8:52 AM Page 1 For models: AV-27D303 AV-27D203 AV-20D303 AV-27330 AV-27320 AV-27S33 COLOR TELEVISION USER'S GUIDE Illustration of AV-27D303 and RM-C252 IMPORTANT NOTE TO THE CUSTOMER In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference.
FE English 5/13/02 8:52 AM Page 2 IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
FE English 5/13/02 8:52 AM Page 3 IMPORTANT SAFEGUARDS CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing.
FE English 5/13/02 8:52 AM Page 4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
FE English 5/13/02 8:52 AM Page 5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
FE English 5/13/02 8:52 AM Page 6 Table of Contents UNPACKING YOUR TV . . . . . 7 TV Models and Remote Controls . . . . . . . . 8 Quick Setup Guide . . . . . . . 11 Connections . . . . . . . . . . 14 Cable and VCR Connections . . . . . . Connecting to a DVD Player . . . . . . . Connecting to an External Amplifier . . . Connecting to a Camcorder . . . . . . . Headphone Connection . . . . . . . . . . . . . . 14 17 18 18 18 Remote Control . . . . . . . . . 19 Remote Control Basics . . . . .
FE English 5/13/02 8:52 AM Page 7 Unpacking Your Television Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Television 1 Remote Control Two AA Batteries AA Alkaline AA Alkaline A matching TV stand is also available (optional).
FE English 5/13/02 8:52 AM Page 8 TV Models and Remotes Guide NOTE: Before you connect your televison to another device, please refer to the proper diagrams for your TV and remote, depending on the model that you have purchased. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your televison.
FE English 5/13/02 8:52 AM Page 9 TV Models and Remotes Guide Front Panel Diagrams VIDEO L/MONO AUDIO R MENU CHANNEL VOLUME POWER ON TIMER OPERATE INPUT 3 MODELS: AV-27D303 and AV-27D203 VIDEO L/MONO AUDIO R MENU CHANNEL VOLUME POWER ON TIMER OPERATE INPUT 3 MODEL: AV-20D303 INPUT 2 VIDEO L / MONO – AUDIO-R POWER MENU – CHANNEL + – VOLUME + ON TIMER OPERATE MODEL: AV-27320 INPUT 3 VIDEO L / MONO – AUDIO-R POWER MENU – CHANNEL + – VOLUME + ON TIMER OPERATE MODELS: AV-27330 and
FE English 5/13/02 8:52 AM Page 10 TV Models and Remotes Guide Remote Control RM-C255 Remote Control RM-C252 Remote Control RM-C253 MODELS: AV-27330, AV-27S33 MODELS: AV-27D203, AV-27D303 MODEL: AV-20D303 SLEEP TIMER VIDEO STATUS POWER DISPLAY INPUT 1 2 3 4 5 6 7 8 100+ 0 MUTING 9 RETURN+ V—CHIP + CH Remote Control RM-C205 VOL + VOL MODEL: AV-27320 CH MENU EXIT VCR CONTROL CHANNEL REW REC POWER TV/VCR PLAY STOP PAUSE RM-C205 10 FF
FE English 5/13/02 8:52 AM Page 11 Quick Setup 1 Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner.
FE English 5/13/02 8:52 AM Page 12 Quick Setup 2 Step Two - Making Basic Connections Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 15 to 16.
FE English 5/13/02 8:52 AM Page 13 Quick Setup 3 Step Three - The Plug In Menu When you turn your television on for the first time the Plug In Menu will appear. This menu sets some of the basic settings for your television. A complete description of the Plug In Menu can be found starting on page 25. We recommend you complete the Plug In Menu items before you start using your television. But to begin watching your television right away you only need to run the Auto Tuner Setup.
FE English 5/13/02 8:52 AM Page 14 Connections Cable and VCR Connections There are three basic types of antenna or cable connections: • If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1. • If you have a cable system that requires the use of a cable box to access all the channels, please refer to Diagram #2.
FE English 5/13/02 8:52 AM Page 15 Connections Cable and VCR Connections - Continued Diagram #2 WALL CABLE or ANTENNA OUT OUT IN CABLE BOX INPUT 1 INPUT 2 OVER VIDEO/Y VIDEO AUDIO OUT VCR COMPONENT VIDEO S-VIDEO AUDIO L/MONO L/MONO PB R PR 75Ω (VHF/UHF) V IN L R OUT L R R OR Illustration of AV-27D303 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
FE English 5/13/02 8:52 AM Page 16 Connections Cable and VCR Connections - Continued Diagram #3 WALL CABLE or ANTENNA OUT IN OUT OUT TWO-WAY SPLITTER OUT IN CABLE BOX INPUT 1 INPUT 2 OVER VIDEO/Y VIDEO AUDIO OUT VCR COMPONENT VIDEO S-VIDEO AUDIO L/MONO L/MONO PB R PR 75Ω (VHF/UHF) V IN L R OUT L R R OR Illustration of AV-27D303 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
FE English 5/13/02 8:52 AM Page 17 Connections Connecting to a DVD player DVD PLAYER AUDIO OUT INPUT 1 R INPUT 2 L Y PB COMPONENT VIDEO S-VIDEO VIDEO/Y VIDEO AUDIO OUT PR OUT OVER AUDIO L/MONO L/MONO PB R PR Green Blue Red 75Ω (VHF/UHF) L R R Illustration of AV-27D303 1) Connect Green cable out from DVD player “Y” Component Output, in to TV “VIDEO/Y” Component Input. 2) Connect Blue cable out from DVD player “PB” Component Output, in to TV “PB” Component Input.
FE English 5/13/02 8:52 AM Page 18 Connections Connecting to an External Amplifier RIGHT FRONT SPEAKER LEFT FRONT SPEAKER INPUT 1 COMPONENT VIDEO OVER 75Ω (VHF/UHF) VIDEO/Y VIDEO AUDIO OUT AMPLIFIER INPUT 2 S-VIDEO AUDIO L/MONO L/MONO PB R PR L R Illustration of AV-27D303 R 1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.
FE English 5/13/02 8:52 AM Page 19 Remote Control Remote Control Basics • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustration, please see page 11.) • Press the POWER button to turn the television on or off. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. (Except for RM-C205).
FE English 5/13/02 8:52 AM Page 20 Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. NOTE: The RM-C205 remote control can only operate JVC-brand devices.
FE English 5/13/02 8:52 AM Page 21 Remote Programming VCR codes The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button.
FE English 5/13/02 8:52 AM Page 22 Remote Programming DVD codes Available with remote control models RM-C255, RM-253 and RM-C252 only. The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) 2) 3) 4) 5) 6) Find the DVD player brand from the list of codes shown below. Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
FE English 5/13/02 8:52 AM Page 23 Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: Up and Down arrows mean press the CH+ or CH- buttons.
FE English 5/13/02 8:52 AM Page 24 Onscreen Menus The Onscreen Menu System Your television comes with JVC’s Onscreen Menu System. The Onscreen Menus let you make adjustments to your television’s operation simply and quickly. Examples of the Onscreen Menus are shown below and on the next page. Detailed explanations on using each menu follow later in this guide.
FE English 5/13/02 8:52 AM Page 25 Plug In Menu Introduction The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu helps you to get your TV ready to use by letting you set your preferences for: • The Language in which you want the onscreen menus to appear, • The Auto Tuner Setup of which channels you wish to receive, • Setting the TV’s clock to the correct time so your timer functions will work properly.
FE English 5/13/02 8:52 AM Page 26 Plug In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most Public Broadcasting stations.
FE English 5/13/02 8:52 AM Page 27 Plug In Menu Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock menu and follow the steps below. To SET CLOCK ¥ ¥ To operate To move to the hour ¥ To set the hour To move to minutes ¥ To MANUAL To set the minutes To move to START CLOCK ¥ To start clock and exit THANK YOU! • You will not need to press the MENU button to enter this screen from the Plug In Menu.
FE English 5/13/02 8:52 AM Page 28 Channel Summary Channel Summary Channel Summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Press the MENU button To CHANNEL SUMMARY ¥ To operate The Channel Summary screen (above) will now be displayed with the channels set to scan marked with an " ". You can delete channels from the scan by removing the " ".
FE English 5/13/02 8:52 AM Page 29 V-Chip Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to program your TV to receive, or not to receive, programs based on content according to the guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer attempts to watch a blocked channel, this message appears: THIS PROGRAMMING EXCEEDS YOUR RATING LIMITS.
FE English 5/13/02 8:52 AM Page 30 V-Chip US V-Chip Ratings U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children. Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children. Most parents would find such programs suitable for children 7 and above.
FE English 5/13/02 8:52 AM Page 31 V-Chip Setting US V-Chip Ratings Press the MENU button ¥ To V-CHIP To operate (Lock icon appears) Press ZERO to access the V-Chip menu ¥ To turn V-Chip ON or OFF To move to SET US TV RATINGS ¥ To operate Directions to set US V-Chip Ratings: Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the or to move the cursor to the correct location. Press ¥ or to turn the locking feature on or off.
FE English 5/13/02 8:52 AM Page 32 V-Chip Setting ratings with the V-Chip button To access Rating information about a certain program, press the V-CHIP button while viewing that program. A display like this will appear: PROGRAM IS RATED : TV-PG - V If you decide you want to block this category of viewing, press "0" while the above screen is visible, and all programs from that category will be blocked.
FE English 5/13/02 8:52 AM Page 33 V-Chip Movie Ratings ❒ NR - Not Rated. This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including children's programming, foreign programs, or adult material. ❒ G – General Audience.
FE English 5/13/02 8:52 AM Page 34 V-Chip Canadian V-Chip Ratings ❒ E - Exempt. Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children. Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
FE English 5/13/02 8:52 AM Page 35 V-Chip Unrated Programs Notes About Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming" category.
FE English 5/13/02 8:52 AM Page 36 V-Chip Set Lock Code Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below.
FE English 5/13/02 8:52 AM Page 37 Picture Settings Tint Tint allows you to adjust the levels of red and green in your TV picture. Press the MENU button ¥ To TINT To increase the levels of green To increase the levels of red To move to the next setting Color The color function lets you make all the colors in the TV picture appear either more vivid or subtle.
FE English 5/13/02 8:52 AM Page 38 Picture Settings Color Temperature With COLOR TEMPERATURE, you can decide how strong or dull the colors appear on the TV screen. Press the MENU button To COLOR TEMPERATURE ¥ To COLOR TEMPERATURE LOW or HIGH • For models AV-27D303, AV-27D203 and AV-20D303 only. Noise Muting This feature inserts a blank blue screen over channels which are not broadcasting or are too weak to be received clearly.
FE English 5/13/02 8:52 AM Page 39 Sound Settings Bass You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass adjustment. Press the MENU button ¥ To BASS To increase the bass To decrease the bass To move to the next setting Treble Use Treble to adjust the level of high-frequency sound in your TV’s audio.
FE English 5/13/02 8:52 AM Page 40 General Items On/Off Timer The On/Off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you're not home. Press the MENU button To ON/OFF TIMER ¥ To operate (begins with ON TIME) ¥ To set the hour (AM/PM) you want the TV to turn on To move to minutes To accept ON TIME and move to OFF TIME (the time the TV will turn off).
FE English 5/13/02 8:52 AM Page 41 General Items Closed Caption Many broadcasts now include an onscreen display of dialog called Closed Captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the Closed Caption feature. To activate the Closed Caption feature, follow the steps below.
FE English 5/13/02 8:52 AM Page 42 General Items Auto Shut Off This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the MENU button To AUTO SHUT OFF ¥ To turn ON or OFF EXIT when finished • If the channel that you have on does not recieve a signal for more than one minute, the blinking text “NOT RECIEVING A SIGNAL” appears on the screen. If no signal is being recieved within 10 minutes, the TV shuts itself off.
FE English 5/13/02 8:52 AM Page 43 Button Functions Menu The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate the onscreen menu system. • See individual topics (like “Sound Settings) for specific information on using menus. Exit Press the EXIT button to leave a menu screen. Display The Display screen shows the current status of timers, inputs and XDS ID.
FE English 5/13/02 8:52 AM Page 44 Button Functions Video Status The VIDEO STATUS button gives you a choice of three TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings. Dynamic - Heightens contrast. Theater - Gives a rich, film-like look to video. (AV-27D303, AV-27D203 and AV-20D303 only) Sports - When you watch a sports program.
FE English 5/13/02 8:52 AM Page 45 Button Functions BBE (RM-C252 only) BBE high definition audio adds natural, clear and extraordinary sound quality to any program. Turn BBE On or Off using the BBE button. BBE ON OFF 100+ Button Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124, press100+, 2 (two), 4 (four). Return+ The RETURN+ button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen.
FE English 5/13/02 8:52 AM Page 46 Button Functions TheaterPro D6500K (RM-C253 and RM-C252 only) The TheaterPro D6500K Color Temperature Technology function makes sure that the video you watch is set to the standard color temperature, so that what you see is as true to what the film to video editors intended it to be. VCR Buttons You can use this remote control to operate the basic functions of your VCR.
FE English 5/13/02 8:52 AM Page 47 Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. There is no picture or sound • The antenna could be disconnected. • The input mode could be set improperly. See page 45. • The tuner (Auto Tuner Setup) could be set improperly. See page 25. • The TV station may be having difficulties. Check to see if other stations are working.
FE English 5/13/02 8:52 AM Page 48 Warranty For Canadian model televisions, see the separate sheet for Canadian Warranty information. JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.
FE English 5/13/02 8:52 AM Page 49 Warranty 7) Accessories; 8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of purchase.) There are no express warranties except as listed above. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
FE English 5/13/02 8:52 AM Page 50 Authorized Service Centers QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary, please call 1 (800) 537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
FE English 5/13/02 8:52 AM Page 51 Search Codes NOTE: Except for AV-27320. Cable/Satellite Search Codes Function: 1) 2) 3) 4) Slide the first 2-Way Mode Selector switch to CATV. Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release. Press TV POWER, see if the CATV or Satellite box responds. If there was a response, press RETURN+. The operating codes are now set. If there was no response, repeat Step 3.
FE English 5/13/02 8:52 AM Page 52 Specifications MODEL AV-27330 AV-27S33 AV-27320 AV-20D303 AV-27D303 AV-27D203 Reception Format NTSC, BTSC System (Multi-Channel Sound) Reception Range VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super, Hyper and Ultra bands (181 channel frequency synthesizer system) Power Source Power Consumption Screen Size AC 120V, 60Hz 75W 105W 20 inch / 51 cm measured diagonally full square 27 inch / 68 cm measured diagonally full square Audio Output 1.2W + 1.
FE French 5/13/02 8:54 AM Page 1 MANUEL D’INSTRUCTIONS POUR TÉLÉVISEUR EN COULEURS Pour les modèles : AV-27D303 AV-27D203 AV-20D303 AV-27330 AV-27320 AV-27S33 Illustration du modèle AV-27D303 et RM-C252 REMARQUE: Veuillez inscrire dans les espaces ci-dessous le modèle et le numero de série de votre téléviseur (situés à l’arrière du téléviseur). Agrafez votre reçu ou votre facture à la page intérieure de ce guide. Rangez ce manuel dans un lieu où vous le retrouverez rapidment pour vous y référer.
FE French 5/13/02 8:54 AM Page 2 IMPORTANTES PRÉCAUTIONS DE SÉCURITÉ ATTENTION RISQUE D’ÉLECTROCUTION NE PAS OUVRIR ATTENTION : Pour diminuer les risques d’électrocution Ne pas retirer le capot (ou le panneau arrière). Aucune pièce à l’intérieur n’est réparable par l’utilisateur. Adressez-vous à un réparateur qualifié pour la maintenanc.
FE French 5/13/02 8:54 AM Page 3 IMPORTANTES REGLES DE SECURITE ATTENTION : Veuillez lire et retenir ce qui suit pour votre sécurité. L’énergie électrique autorise de nombreuses applications utiles. Ce téléviseur a été conçu et fabriqué pour assurer la sécurité de l’utilisateur. Mais une utilisation incorrecte peut entraîner une electrocution ou un incendie.
FE French 5/13/02 8:54 AM Page 4 7 L’antenne extérieure ne doit pas se trouver à proximité d’une ligne électrique, de poteaux d’éclairage public ou autres circuits électriques ou encore à un endroit où elle peut tomber sur de telles lignes ou de tels circuits. Au cours de l’installation d’une antenne extérieure, faites particulièrement attention à ne pas toucher ces lignes car un tel contact est mortel.
FE French 5/13/02 8:54 AM Page 5 13 Pour encore mieux protéger votre téléviseur pendant un orage ou si vous ne l’utilisez pas pendant une longue période de temps, débranchez la prise secteur et déconnectez l’antenne. Vous évitez ainsi d’endommager le téléviseur en cas de foudre ou de surtension. 14 Un téléviseur sur table roulante doit être déplacé avec précaution. Des arrêts soudains, une force excessive ou une surface irrégulière peuvent renverser le téléviseur et sa table roulante.
FE French 5/13/02 8:54 AM Page 6 Table des Matières Déballage de votre téléviseur . 7 GUIDE SUR LES MODÈLES DE TÉLÉVISEUR et LES TÉLÉCOMMANDES . . . . . . . 8 CONFIGURATION RAPIDE . . 11 CONNEXIONS . . . . . . . . . . 14 Connexions de câble et magnétoscope Connexion à un lecteur de DVD . . . . Connexion à un amplificateur extérieur Connexion à un Caméscope . . . . . . Connexion à un casque d’écoute . . . . . . . . . 14 17 18 18 18 PREMIERS PAS . . . . . . . . 19 Télécommande Télécommande bases . . .
FE French 5/13/02 8:54 AM Page 7 Déballage de votre téléviseur Merci d’avoir acheté un téléviseur en couleur JVC. Avant de commencer l’installation de votre nouveau téléviseur, assurez-vous d’avoir les pièces suivantes. Outre ce guide, le carton de votre téléviseur doit comprendre : 1 Téléviseur 1 Télécommande Deux Piles AA Un support de téléviseur est également offert (vendu séparément).
FE French 5/13/02 8:54 AM Page 8 Guide sur les modèles de téléviseur et les télécommandes REMARQUE : Avant de raccorder votre téléviseur à un autre dispositif, veuillez vous reporter aux schémas appropriés pour votre téléviseur et votre télécommande, suivant le modèle que vous avez acheté. Ceci vous aidera à comprendre comment raccorder votre téléviseur à un autre dispositif, ainsi qu’à utiliser la télécommande pour configurer votre téléviseur.
FE French 5/13/02 8:54 AM Page 9 Guide sur les modèles de téléviseur et les télécommandes Schémas du panneau avant VIDEO L/MONO AUDIO R MENU CHANNEL VOLUME POWER ON TIMER OPERATE INPUT 3 MODÈLES: AV-27D303 et AV-27D203 VIDEO L/MONO AUDIO R MENU CHANNEL VOLUME POWER ON TIMER OPERATE INPUT 3 MODÈLE: AV-20D303 INPUT 2 VIDEO L / MONO – AUDIO-R POWER MENU – CHANNEL + – VOLUME + ON TIMER OPERATE MODÈLE: AV-27320 INPUT 3 VIDEO L / MONO – AUDIO-R POWER MENU – CHANNEL + – VOLUME + ON TIM
FE French 5/13/02 8:54 AM Page 10 Guide sur les modèles de téléviseur et les télécommandes Télécommande RM-C255 Télécommande RM-C252 Télécommande RM-C253 MODÈLES: AV-27330, AV-27S33 MODÈLES: AV-27D203, AV-27D303 MODÈLE: AV-20D303 SLEEP TIMER VIDEO STATUS POWER DISPLAY INPUT 1 2 3 4 5 6 7 8 100+ 0 MUTING 9 RETURN+ V—CHIP + CH Télécommande RM-C205 VOL + VOL MODÈLE: AV-27320 CH MENU EXIT VCR CONTROL CHANNEL REW REC POWER TV/VCR PLAY RM-C205 10 FF STOP PAUSE
FE French 5/13/02 8:54 AM Page 11 Configuration rapide 1 Pour débuter Ces pages de configuration rapide vous donneront, en trois étapes faciles, les informations de base dont vous avez besoin pour commencer à utiliser immédiatement votre nouveau téléviseur.
FE French 5/13/02 8:54 AM Page 12 Configuration rapide 2 Deuxième étape - Réalisation des connexiones de base Vous devrez ensuite raccorder votre téléviseur à une antenne ou à un système de câblovision. La connexion la plus simple à une antenne ou à un système de câblovision est illustrée ciaprès. Pour des connexions plus détaillées, telles que celles faisant appel à une boîte de câble, reportez-vous aux pages 15 à 16.
FE French 5/13/02 8:54 AM Page 13 Configuration rapide 3 Troisième étape - Le Plug In Menu Le Plug In Menu apparaît lorsque vous mettez votre téléviseur en marche pour la première fois. Ce menu permet d’effectuer quelques-uns des réglages de base de votre téléviseur. Vous trouverez, à compter de la page 25, une description complète du Plug In Menu. Nous vous recommandons d’effectuer les sélections du Plug In Menu avant de commencer à utiliser votre téléviseur.
FE French 5/13/02 8:54 AM Page 14 Connexions Connexions de câble et magnétoscope Il existe trois types de base de connexion d’antenne ou de câble : • Si vous avez une antenne ou un système de câble qui ne vous oblige pas à utiliser une boîte de câble pour sélectionner les canaux, veuillez vous reporter au schéma No. 1. • Si vous avez un système de câblovision qui nécessite l’utilisation d’une boîte de câble pour avoir accès à l’ensemble des canaux, veuillez vous reporter au schéma No. 2.
FE French 5/13/02 8:54 AM Page 15 Connexions Connexions de câble et magnétoscope - suite Schéma #2 Câble ou sortie antenne OUT IN Boîte de câble INPUT 1 INPUT 2 OVER VIDEO/Y VIDEO AUDIO OUT Magnétoscope COMPONENT VIDEO S-VIDEO AUDIO L/MONO L/MONO PB R PR 75Ω (VHF/UHF) V IN L R OUT L R R OR Illustration du modèle AV-27D303 1) Raccordez le fil de câblovision ou d’antenne provenant de la sortie murale dans l’entrée HF de la boîte de câble.
FE French 5/13/02 8:54 AM Page 16 Connexions Connexions de câble et magnétoscope - suite Schéma #3 Câble ou sortie antenne IN OUT OUT Distributeur OUT IN INPUT 1 INPUT 2 Magnétoscope COMPONENT VIDEO S-VIDEO OVER VIDEO/Y VIDEO AUDIO OUT Boîte de câble AUDIO L/MONO L/MONO PB R PR 75Ω (VHF/UHF) V IN L R OUT L R R OU Illustration du modèle AV-27D303 1) Raccordez le fil de câblovision ou d’antenne provenant de la sortie murale dans l’entrée HF du répartiteur à deux voies.
FE French 5/13/02 8:54 AM Page 17 Connexions Connexion à un Lecteur de DVD Lecteur DVD AUDIO OUT INPUT 1 R INPUT 2 L Y PB COMPONENT VIDEO S-VIDEO AUDIO OUT PR OUT OVER VIDEO/Y VIDEO AUDIO L/MONO L/MONO PB R PR Vert Bleu Rouge 75Ω (VHF/UHF) L R R Illustration du modèle AV-27D303 1) Raccordez le câble vert provenant de la sortie composant « Y » du lecteur de DVD à l’entrée du composant « VIDEO/Y » du téléviseur.
FE French 5/13/02 8:54 AM Page 18 Connexions Connexion à un Amplificateur Extérieur Haut-parleur gauche INPUT 1 Amplificateur INPUT 2 COMPONENT VIDEO S-VIDEO OVER 75Ω (VHF/UHF) VIDEO/Y VIDEO AUDIO OUT Haut-parleur droit AUDIO L/MONO L/MONO PB R PR L R Illustration du modèle AV-27D303 R 1) Raccordez le câble audio blanc provenant du jack de sortie audio gauche du téléviseur au jack d’entrée audio gauche de l’amplificateur.
FE French 5/13/02 8:54 AM Page 19 Premiers Pas Fonctiones de base de la télécommande • Avant de pouvoir utiliser la télécommande, vous devez d’abord poser les piles (fournies). Reportez-vous à la section « Changement des piles » au bas de cette page pour instructions. (Vous trouverez une illustration à la page 11.) • Appuyez sur le bouton POWER pour mettre la télévision en marche ou à l’arrêt. • Assurez-vous que le commutateur TV/CATV se trouve sur la position TV.
FE French 5/13/02 8:54 AM Page 20 Premiers Pas Réglage des Codes CATV, Magnétoscope, et lecteur DVD Vous pouvez programmer votre télécommande de manière à actionner votre boîte de câble, récepteur satellite, magnétoscope ou lecteur de DVD en vous reportant aux instructions et aux codes apparaissant ci-après. Si l’appareil ne répond à aucun des codes énumérés ciaprès ou à la fonction de recherche de codes, utilisez la télécommande fournie par le fabricant.
FE French 5/13/02 8:54 AM Page 21 Premiers Pas Codes de Magnétoscope La télécommande est programmée avec les codes magnétoscope pour la mise en marche et à l’arrêt, la lecture, l’arrêt, l’avance rapide, le rembobinage et le balayage de canaux vers le haut et vers le bas. 1) Repérez la marque magnétoscope à même la liste des codes apparaissant ci-après.
FE French 5/13/02 8:54 AM Page 22 Premiers Pas Codes de lecteur DVD Disponible avec télécommandes RM-C255, RM-C253 et RM-C252 seulement. La télécommande est programmée avec les codes DVD pour la mise en marche et à l’arrêt, la lecture, l’arrêt, l’avance rapide, le rembobinage, chapitre précédent, chapitre suivant, l’overture/la fermeture du plateau, et l’image fixe/la pause. 1) Repérez la marque de lecteur DVD à même la liste des codes apparaissant ci-après.
FE French 5/13/02 8:54 AM Page 23 Utilisation de ce Guide Utilisation de ce Guide Les flèches montante et descendante signifient d’appuyer sur les boutons Channel Up ou Channel Down. Une pression des boutons de flèche montante ou descendante vous permet de : Les flèches montante et descendante signifient d’appuyer sur les boutons Channel Up ou Channel Down.
FE French 5/13/02 8:54 AM Page 24 Menus à l'écran Système de menus à l'écran Votre téléviseur est équipé d'un système de menus à l'écran JVC. Ces menus vous permettent de régler facilement et rapidement votre téléviseur. Des exemples de menus à l'écran sont donnés ci-après et à la page suivante. Des explications détaillées portant sur l'utilisation de chaque menu sont données par la suite dans ce guide. Appuyez sur le bouton MENU CONFIG. INITIALE 02 CONFIG.
FE French 5/13/02 8:54 AM Page 25 Plug In Menu Introduction Le Plug In Menu remonte automatiquement lorsque vous mettez le téléviseur en marche la première fois après l’avoir branché.
FE French 5/13/02 8:54 AM Page 26 Plug In Menu Régler Horloge Automatique Vous devez d’abord régler l’horloge avant d’utiliser l’une quelconque des fonctions de minuterie de votre téléviseur. Vous pouvez régler votre horloge avec précision à l’aide du signal horaire XDS diffusé par la plupart des stations PBS.
FE French 5/13/02 8:54 AM Page 27 Plug In Menu Régler Horloge Manuel Pour régler votre horloge manuellement (sans utiliser le signal XDS), choisissez MANUEL depuis le menu Régler horloge et suivez les étapes ci-après.
FE French 5/13/02 8:54 AM Page 28 Sommaire Canaux Sommaire Canaux Sommaire canaux vous permet de particulariser l’éventail de canaux reçus par votre téléviseur. Vous pouvez ajouter ou éliminer des canaux de la liste de balayage ou les verrouiller afin d’empêcher des spectateurs non autorisés de regarder un ou plusieurs parmi ces canaux (jusqu’à 181).
FE French 5/13/02 8:54 AM Page 29 V-Chip Votre téléviseur est pourvu de la technologie puce V, ce qui permet aux parents d’imposer des Directives parentales pour la télévision (aux États-Unis et au Canada) et les films (MPAA). La technologie de la puce V vous permet de programmer votre téléviseur de manière à recevoir, ou à ne pas recevoir, certains programmes sur la base de leur contenu conformément aux directives. Les programmes qui dépassent les limites de cotes que vous imposez seront bloqués.
FE French 5/13/02 8:54 AM Page 30 V-Chip Fixer Cotes Téléviseur (Systèmes Américains) SYSTÈMES AMÉRICAINS DE COTES PARENTALES Les programmes possèdant les cotes suivantes sont appropriés pour les enfants. ❒ TV Y est approprié pour tous les enfants. Les programmes sont réalisés pour de très jeunes spectateurs et ils devraient convenir à tous les âges, y compris les enfants âgés de 2 à 6 ans. ❒ TV Y7 est destiné aux enfants plus âges.
FE French 5/13/02 8:54 AM Page 31 V-Chip Fixer Cotes Téléviseur Appuyez sur le bouton MENU ¥ Vers V-CHIP Pour exécuter (l’icône de verrouillage aparaît) Appuyez sur ZERO pour accéder au menu Puce V ¥ Pour activer (ON) ou inhiber (OFF) la puce V Pour passer à FIXER COTES TÉLÉVISEUR ¥ Pour exécuter Pour configurer les cotes de Directives Parentales TV (EU) : Alignez le curseur de la colonne (TV PG, TV G, etc.) sur la rangée contenu (V/FV, S, etc.
FE French 5/13/02 8:54 AM Page 32 V-Chip Fixer cotes avec le bouton V-Chip Pour accéder aux informations de cote au sujet d’un programme particulier, appuyez sur le bouton de la V-Chip tout en regardant ce programme. Le message suivant apparaît : LE PROGRAMME EST COTÉ : TV-PG - V Si vous décidez que vous voulez bloquer cette catégorie d’écoute, appuyez sur « 0 » pendant que l’écran ci-dessus est visible, et tous les programmes de cette catégorie seront verrouillés.
FE French 5/13/02 8:54 AM Page 33 V-Chip Fixer Cotés Film ❒ NR - Non coté. Il s’agit d’un film non coté. Ces films sont souvent importés de pays qui n’utilisent pas le système de cotes MPAA. D’autres films non cotés peuvent être l’oeuvre de réalisateurs amateurs qui n’avaient pas l’intention de diffuser leur film dans le grand public. La programmation NR (non coté) peut contenir tous les types de programmation, y compris des programmes pour enfants, des programmes étrangers ou du matériel adulte.
FE French 5/13/02 8:54 AM Page 34 V-Chip Cotes Canadiennes de puce V ❒ E - Exemptées. Les programmes exempts comprennent : les informations, les émissions sportives, les documentaires et autres programmes d’information, les débats, les vidéos de musique, et les programmes de variétes. ❒ G – Général. Directives de violence : il n’y aura aucune scène réaliste de violence.
FE French 5/13/02 8:54 AM Page 35 V-Chip Programmes Non Coté Remarques au sujet des progranmmes non cotés La programmation non cotée désigne tout programme qui ne contient pas de signal de cote. Les programmes des postes de télévision qui ne transmettent pas de signaux de cote seront dans la catégorie « Programmation non cotée ».
FE French 5/13/02 8:54 AM Page 36 V-Chip Régler Code Verrouiller Les réglages de canal réservé et de puce V sont protégés par un code de verrouillage à quatre chiffres. Votre téléviseur est offert préréglé avec un code de verrouillage de 0000. Vous pouvez changer le code à tout numéro à quatre chiffres que vous désirez. Pour changer le code de verrouillage, suivez les étapes ci-après.
FE French 5/13/02 8:54 AM Page 37 Réglages de l’Image Teinte La teinte vous permet de régler les niveaux de rouge et de vert dans l’image de votre téléviseur. Appuyez sur le bouton MENU ¥ Pour TEINTE Pour augmenter le vert Pour augmenter le rouge Pour passer à l’option suivante Couleur La fonction Couleurs vous permet de rendre toutes les couleurs de l’image du téléviseur plus vives ou plus subtiles.
FE French 5/13/02 8:54 AM Page 38 Réglages de l’Image Temp. Couleur Grâce à TEMP. COULEUR, vous pouvez décider l'intensité (élevée ou faible) des couleurs appraissant sur l'écran de télévision. Appuyez sur le bouton MENU Pour TEMP. COULEUR ¥ Pour TEMP. COULEUR BASSE ou HAUTE • Pour les modèles AV-27D303, AV-27D203 et AV-20D303 seulement. Bruit Réduit Cette fonction insère un écran bleu vide par-dessus les canaux qui ne transmettent pas ou qui sont trop faibles pour être reçus clairement.
FE French 5/13/02 8:54 AM Page 39 Réglages du Son Basse La fonction de réglage de niveau Basse vous permet de monter ou de réduire le niveau des sons à basse fréquence du téléviseur. Appuyez sur le bouton MENU ¥ Pour BASSE Pour augmenter le niveau des graves Pour diminuer le niveau des graves Pour passer à l’option suivante Aigu La fonction de réglage de niveau Aigu vous permet de monter ou de réduire le niveau des sons à haute fréquence du téléviseur.
FE French 5/13/02 8:54 AM Page 40 Éléments Généraux Minuterie On/Off Faites savoir à votre téléviseur quand il doit se mettre en marche ou s’arrêter. Utilisez cette fonction en tant qu’alarme pour vous réveiller, pour vous rappeler l’heure d’un programme important ou encore comme un agent de diversion quand vous êtes en dehors de la maison.
FE French 5/13/02 8:54 AM Page 41 Éléments Généraux Sous-Titres Utilisez cette fonction pour afficher le texte des Sous-titres (lorsqu’ils sont compris dans un programme).
FE French 5/13/02 8:54 AM Page 42 Éléments Généraux Mise à l'arrêt auto La fonction de mise à l’arrêt automatique met automatiquement à l’arrêt votre téléviseur lorsqu’aucun signal n’est transmis par le canal sur lequel est le téléviseur. Appuyez sur le bouton MENU Pour MISE À L'ARRÊT AUTO ¥ Pour ON ou OFF EXIT lorsque vous avez terminé • Si le canal syntonisé ne reçoit pas de signal pendant plus d’une minute, un message clignotant « NE REÇOIT AUCUN SIGNAL » apparaîtra à l’écran.
FE French 5/13/02 8:54 AM Page 43 Fonctions des Boutons Menu Le bouton MENU vous permet d’accéder au système de menus à l’écran JVC. Appuyez sur MENU pour activer le système de menus à l’écran. • Reportez-vous aux sections individuelles (telles que « Réglages du son ») pour obtenir des informations précises sur l’utilisation des menus. Exit (Sortie) Appuyez sur le bouton EXIT pour quitter un écran de menu. Display (Affichage) L’écran Affichage indique l’état courant des minuteries, entrées et XDS ID.
FE French 5/13/02 8:54 AM Page 44 Fonctions des Boutons Video Status (Statut Vidéo) Le bouton VIDEO STATUS vous permet de sélectionner l’un de trois réglages d’affichage d’image, y compris un affichage de vos propres préférences. Standard - Réinitialise les réglages de l’image aux niveaux standard usine. Dynamique - Cette fonction accroît le contraste. Cinéma - Donne à la vidéo un aspect riche, similaire au film.
FE French 5/13/02 8:54 AM Page 45 Fonctions des Boutons BBE (RM-C252 seulement) L’audio à haute définition BBE ajoute un son naturel, clair et de très haute qualité à tout programme. Activez ou inhibitez BBE à l’aide du bouton BBE. BBE ON OFF Bouton 100+ Le bouton 100+ permet d’accéder directement aux canaux au-dessus de 99. Ainsi, pour passer au canal 124; appuyez sur le 100+, 2 (deux), 4 (quatre).
FE French 5/13/02 8:54 AM Page 46 Fonctions des Boutons TheaterPro D6500K (Temp. Couleur) (RM-C253 et RM-C252 seulement) La Technologie de température des couleurs TheaterPro 6500K fait en sorte que la vidéo que vous regardez soit réglée à cette température de couleurs standard et que l’image que vous voyez soit aussi fidèle au film que les monteurs de la vidéo le désiraient. Boutons Magnétoscope Vous pouvez utiliser cette télécommande pour activer les fonctions de base de votre magnétoscope.
FE French 5/13/02 8:54 AM Page 47 Guide de Dépannage PROBLÈMES VÉRIFICATION Pas d'alimentation • Voir si le cordon secteur est débranché. • Disjoncteur ou fusibles sautés ou panne de courant. Pas d'image, pas de son • L'antenne est déconnectée. • Le mode d'entrée n'est pas sélectionné correctement. Voir page 45. • Le mode sélecteur (configuration automatique du sélecteur) est mal réglé. Voir page 25. • La station est en panne, vérifiez le bon fonctionnement des autres canaux.
FE French 5/13/02 8:54 AM Page 48 Garantie Pour les télévisions de modèles canadiens, veuillez vous reporter aux feuilles distinctes concernant la garantie pour JVC au Canada JVC COMPANY OF AMERICA garantit ce produit et toutes ses pièces, sauf comme indiqué ciaprès, À L'ACHETEUR DÉ DÉTAIL INITIAL comme étant EXEMPTS DE VICES DE MATÉRIAUX ET D'EXÉCUTION depuis la date de l'achat initial pendant la période indiquée ciaprès (la « période de garantie »). L'écran est couvert pendant deux ans. No.
FE French 5/13/02 8:54 AM Page 49 Garantie 6) Les tubes de prise de vue/le capteur d'images CCD, la cartouche et l'aiguille sont couverts pendant une période de 90 jours depuis la date d'achat. 7) Les accessoires, et 8) Les piles (à l'exception des piles rechargeables qui sont couvertes pendant 90 jours depuis la date d'achat). Il n'existe aucune garantie explicite, sauf celles mentionnées ci-dessus.
FE French 5/13/02 8:54 AM Page 50 Centres de Réparations Agréés SERVICE DE QUALITÉ SERVICE DE QUALITÉ COMMENT REPÉRER VOTRE CENTRE DE SERVICE JVC NUMÉRO SANS FRAIS : 1 (800) 537-5722 http://www.jvc.com Cher client, Afin de recevoir des prestations optimales de l’appareil que vous avez acheté, veuillez lire le manuel d’instructions avant de mettre l’appareil en marche.
FE French 5/13/02 8:54 AM Page 51 Codes de Recherche Remarque : non disponible sur le modèle AV-27320. Fonction des Codes de Recherche de Boîte de Câble ou d’Antenne Parabolique 1) Faites glisser l’interrupteur sélecteur de mode à deux voies à la position « CATV ». 2) Appuyez sur les boutons TV POWER et RETURN+ pendant au moins trois secondes, puis relâchez. 3) Appuyez sur TV POWER et vérifiez si la boîte de câble ou la boîte d’antenne parabolique répond.
FE French 5/13/02 8:54 AM Page 52 Spécifications MODÈLE AV-27330 AV-27S33 AV-27320 AV-20D303 Système de Réception NTSC, BTSC System (Son multicanaux) VHF 2 à 13, UHF 14 à 69 Bandes Sub Mid, Mid, Super, Hyper et Ultra (Système de synthétiseur à 181 canaux) Canaux reçus Alimentation Consommation Taille écran AV-27D303 AV-27D203 AC 120V, 60Hz 75W 105W 51 cm en diagonale coins carres 68 cm en diagonale coins carres Puissance audio 1.2W +1.