Colour Television Instructions Manual

ManualsBrandsJVC ManualsCRT TVAV-28BT8EEB

Summary of content (14 pages)

PAGE 1
PAGE 2
Contents Safety Precautions Safety Precautions ................................................... 1 1. Power Source Remote Control Buttons .......................................... 2 The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting Control Panel Buttons .............................................. 3 for your convenience. Antenna Connections ............................................... 3 2. Power Cord Preparation ................
PAGE 3
Remote Control Buttons = Stand By / Power 0 - 9 = Direct Program Standard Button (PICTURE default settings) Colour Buttons MENU = Menu Button ( ( ) = Cursor Up / Programme Up ) = Cursor Right / Volume + Teletext Control Buttons VCR Control Buttons ( ( ) = Cursor Down / Programme Down ) = Cursor Left / Volume - AV = AV Button = Information Button = Mute CAUTION RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
PAGE 4
Control Panel Buttons AV-28BT8EEB AV-28BT8EES AV-29BF11EES Antenna Connections ENGLISH - 3 -
PAGE 5
Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
PAGE 6
Programme Selecting (Previous or next programme): Press button to select the previous programme. Press button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected program after a short delay. When you press first digit, second digit will be displayed with - symbol for 3 seconds.
PAGE 7
Setting Bass Level: Picture Menu Using To change picture settings: or button select Bass. Press button to increase bass level. Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button. or, Enter the Picture Menu directly, pressing the GREEN button. Press button to decrease bass level.
PAGE 8
Setting Hue (In AV mode only) : Using or During the last minute of the count down, the timer is displayed on the upper right of the screen. When the timer reaches zero, TV goes to stand-by. button select HUE. Press button to increase HUE level. Press button to decrease HUE level. HUE adjust is functional only when NTSC 3.58/4.43 is applied in AV mode. It does not appear when other colour systems used. Child Lock: In Feature Menu, press or button to select CHILD LOCK.
PAGE 9
To programme a channel in a TVs programme number manually: 1. PROGRAMME will be the first selected item as you enter the INSTALL. menu. Pressing or button select the programme number where you want to the tuned channel to be stored. (You may also type the programme number using the digit buttons.) If you want to name the new programme, follow the instructions under "To change the name of a programme" on page 8. Note: Do not use Programme item in the INSTALL. menu to select the programme number.
PAGE 10
A.P.S. To Display the Time If you enter the A.P.S. menu, you can automatically programme the received channels in your TVs programmes with A.P.S. ( Automatic programme system ). 1. After displaying the PROGRAM. menu, press the BLUE button to enter the A.P.S. menu. 2. Select LANGUAGE with the or button, then press the or button to select a menu language. 3. Select COUNTRY with the or button, then press the or button to select the country you are now located. 4.
PAGE 11
The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen. Press button to move the Teletext screen forward one page at a time. button to move the Teletext screen backward Press one page at a time. If the selected subcode page is not displayed in a short time, press button. TV programme will be displayed on the screen.
PAGE 12
Connect the External Equipments Before connecting anything Switch off all equipments including the TV. Read the manuals provided with the equipments. To select an AV mode Pressing AV button on the remote control selects one of four AV modes (AV- 1, AV-2, AV-2 S and F-AV). To return to the TV mode, repeatedly press AV button or press or AV-1 (EXT.1) terminal: Euroconnector (21-pin, SCART) Video input, Audio L/R inputs and RGB inputs are available.
PAGE 13
Via the Euroconnector Tips Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the AV-1 (EXT.1) or AV-2 (EXT.2) terminals. If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically. RGB mode If an equipment can output the RGB signals, connect it to the AV-1 (EXT.1) terminal.
PAGE 14
Specifications TV BROADCASTING .......................................... PAL SECAM B/G D/K K1 RECEIVING CHANNELS ..................................... VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (B/G: S01-S41 / S75-S79 ; D/K: S01-S41) NUMBER OF PRESET CHANNELS ................... 100 CHANNEL INDICATOR ........................................ On Screen Display RF AERIAL INPUT .............................................. 75 Ohm (unbalanced) OPERATING VOLTAGE ......................................