ENGLISH AV-28F3SJ COLOUR TELEVISION 50056683 ©2004 Victor Company of Japan, Limited 1004-MKH-VT-VT INSTRUCTIONS
Contents Safety Precautions Safety Precautions .................................................. 1 Warning ..................................................................... 2 Guidelines for safe operation ................................ 2 Remote Control Buttons ......................................... 3 Control Panel Buttons ............................................. 4 Antenna Connections .............................................. 4 Preparation ...............................................
Warning Guidelines for safe operation DO NOT cut off the mains plug from this equipment. This equipment has been designed and manufactured to comply with international safety standards. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. Before attempting to use this equipment, read the operating instructions thoroughly.
Remote Control Buttons = Stand By / Power £ 0 - 9 = Direct Program £ Yellow Button / Factory Settings in Picture Menu Blue Button Ó PICTURE = Picture Mode Change ( ) = Programme Up (Cursor Up) MENU = Menu Button ( ) = Cursor Right / Volume + ( ) = Programme Down (Cursor Down) Teletext / VCR /DVD Control Buttons £n Î £Ç { = Stereo / Bilingual Button = VCR / / DVD Switch È = Information Button / T-V Link in Program Menu ( x £È ) = Cursor Left / Volume - £x Ç £{ n AV = AV Button = Te
Control Panel Buttons Antenna Connections ENGLISH - 4 ENG-2826W-AK45-1512UK-16-9-BSI-(AV-28F3SJ)-50056683.p65 4 15.09.
Preparation Replace the battery cover. Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and moderate climates. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels.
To cancel AUTO PROGRAM, press the PICTURE button. Megalogic (a trademark of Grundig Corporation) SMARTLINK (a trademark of Sony Corporation) Downloading data to VCR: The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the programme channels on your VCR manually. The T-V LINK menu will be displayed when you press the button while PROGRAM menu is displayed, or whenever the INSTALL menu operations are performed.
This function does not happen if your TVs main power is turned off. Set your TVs main power to on (standby mode). Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the right side of the TV. Volume Setting: Press - button to decrease volume or + button to increase volume, so a volume level scale will be displayed on the screen. Menu System Your TV has been designed with a menu system.
Setting Balance: Using Setting Contrast: or You can change Contrast only when Picture Mode is selected MANUAL. button select Balance. Press button to change balance rightward. Using Press button to change balance leftward. or button select Contrast. Press button to increase Contrast level. Press button to decrease Contrast level. 92/8 0( %$66 75(%/( %$/$ 1&( +<3( 5 62 81' 21 Hyper Sound: You can use this feature to switch on or off Hyper Sound.
Hue adjust is functional only when NTSC 3.58/4.43 is applied in AV mode. It does not appear when other colour systems used. When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually. REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. Setting VCR Mode (In AV mode only) : Using or button select VCR MODE.
You can choose the ZOOM mode by pressing the ZOOM (RED) button when no menu appears on the screen. The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return the previous ZOOM mode, choose the ZOOM mode again. Language: Menu Language can be selected by pressing or button on Language item.
1. PROGRAMME will be the first selected item as you enter the INSTALL menu. Pressing or button select the programme number where you want to the tuned channel to be stored. (You may also type the programme number using the digit buttons.) Note: Do not use PROGRAMME item when you modify the current programme numbers setting. If you select other programme number by mistake, the selected programme numbers setting will be changed. or button to select BAND. Using or 2.
Program (Programming) Menu You can use the PROGRAM (Programming) menu to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the AUTO PROGRAM (AUTOSTORE) function. Press MENU button to display the main menu. Press or button to select PROGRAM item, then or button to display the PROGRAM menu. To change the programme number of a channel (INSERT): 1. Choose the channel you want to change the programme number. 2.
Pressing this button again displays the current time. Pressing this button once more remove the on-screen display. To Display the Time While watching a TV programme with Teletext transmission press button twice. The current time information, captured from Teletext will be displayed at the upper left corner of the screen. If the programme being watched does not have Teletext transmission, no time information will be displayed. The time information will disappear after pressing ton again.
Press button again for the bottom half of the information page to be displayed in double height text. Press button once more for the full page of normal height text. To Reveal concealed Information Pressing button once will reveal answers on a quiz or games page. Pressing swers.
Connect the External Equipments Before connecting anything Switch off all equipments including the TV. Read the manuals provided with the equipments. To select an AV mode Pressing AV button on the remote control selects one of six AV modes (EXT-1, RGB, EXT-2, EXT-2S, EXT-3 or EXT-4) To return to the TV mode, repeatedly press AV button. EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART) Video input, Audio L/R inputs and RGB inputs are available.
NTSC Playback Specifications Connect a NTSC video recorder to a terminal. Then press AV button to select the corresponding AV mode. NTSC 3.58/4.43 system is detected automatically in AV mode. Copy Facility You can output the video and audio signals which inputs from TV, EXT.1 (EXT-1) or EXT.3 (EXT-3) terminal to the video recorder connected to the EXT.2 (EXT-2) terminal. To select the output source, see Setting External Source Output on page 10.
