Color profile: Disabled Composite Default screen AV-28GT1BJF AV-28GT1SJF COLOUR TELEVISION VICTOR COMPANY OF JAPAN, LIMITED 50037703 ©2003 VICTOR COMPANY OF JAPAN, LIMITED 0503-JVC D:\Aldus Page Maker Onemli\IB-NEW\JVC\Ak-45\Ingiltere\COVER PAGE-ENG-2835-AK45-1512UK-16-9-BSI-(AV-28GT1&BJF&SJF)-50037703.
Contents Safety Precautions Safety Precautions .................................................. 1 Warning ..................................................................... 2 Guidelines for safe operation ................................ 2 Remote Control Buttons ......................................... 3 Control Panel Buttons ............................................. 4 Antenna Connections .............................................. 4 Preparation ...............................................
Warning Guidelines for safe operation DO NOT cut off the mains plug from this equipment. This equipment has been designed and manufactured to comply with international safety standards. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. Before attempting to use this equipment, read the operating instructions thoroughly.
Remote Control Buttons = Stand By / Power 0 - 9 = Direct Program Yellow Button / Factory Settings in Picture Menu Blue Button PICTURE = Picture Mode Change ( ) = Programme Up (Cursor Up) MENU = Menu Button ( ) = Cursor Right / Volume + ( ) = Programme Down (Cursor Down) Teletext / VCR /DVD Control Buttons = Stereo / Bilingual Button = VCR / / DVD Switch = Information Button / T-V Link in Program Menu ( ) = Cursor Left / Volume - AV = AV Button
Control Panel Buttons +HDGSKRQH 0HQX / 3URJUDP $XGLR ,QSXW 3 &K 7HUPLQDO 5 9LGHR ,QSXW 7HUPLQDO 9ROXPH &21752/ 3$1(/ %877216 3RZHU Antenna Connections ENGLISH - 4 ENG-2835-AK45-1512UK-16-9-BSI-(AV-28GT1&BJF&SJF).p65 4 30.05.
Preparation Replace the battery cover. Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and moderate climates. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels.
To cancel AUTO PROGRAM, press the PICTURE button. Megalogic (a trademark of Grundig Corporation) SMARTLINK (a trademark of Sony Corporation) Downloading data to VCR: The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the programme channels on your VCR manually. The T-V LINK menu will be displayed when you press the button while PROGRAM menu is displayed, or whenever the INSTALL menu operations are performed.
This function does not happen if your TVs main power is turned off. Set your TVs main power to on (standby mode). Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the right side of the TV. Volume Setting: Press - button to decrease volume or + button to increase volume, so a volume level scale will be displayed on the screen. Menu System Your TV has been designed with a menu system.
Setting Balance: Using Setting Contrast: or You can change Contrast only when Picture Mode is selected MANUAL. button select Balance. Press button to change balance rightward. Using Press button to change balance leftward. or button select Contrast. Press button to increase Contrast level. Press button to decrease Contrast level. 92/8 0( %$66 75(%/( %$/$ 1&( +<3( 5 62 81' 21 Hyper Sound: You can use this feature to switch on or off Hyper Sound.
The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Picture Mode: This item is used to change the picture mode. By pressing or button you may choose one of these options: BRIGHT, STANDARD, SOFT, MANUAL. 16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen. 16:9ZOOM S: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.
Feature Menu Blue Background During No-Signal: Press MENU button, now you are in main menu. In the main menu, select FEATURE, using or button. Then enter the feature menu pressing or button. The BLUE BACKGROUND feature can be set by or button to either ON or OFF. 6281' 3,&785( )($785( ,167$// Install (Installation) Menu 352*5$0 Sleep Timer: The sleep timer is used to turn the TV off after a defined period.
If you know the channel number which you want to find, you can find the channel directly. Follow the step 4 to select the correct standard, then press or to select CHANNEL again, and press or button to select the channel number, or enter the number with the digit buttons. 4. If the picture is not clear or no colour appears, change the colour system to display the picture normally. Press or button to select COLOUR SYSTEM, then press or button to choose the correct one.
To choose a channel in the PROGRAM menu: Press / / / button. The programme number that you choose is high-lighted in the PROGRAM menu and you can view the picture of that channel. Caution: Using DELETE or INSERT function rewrite the current channel list in the PROGRAM menu. Therefore, the programme numbers of some of channels will change. When you complete the settings of PROGRAM menu: If you have a T-V LINK compatible VCR, press the button to display the T-V LINK menu.
Picture To select a page of Teletext You can change Picture Mode settings by pressing PICTURE button when no menu appears. Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.
Press scramble a scrambled channel. For details, see Using the Decoder (EXT-2) function on page 11. button. Select the required subcode page number by pressing four digit buttons (e.g. 0001). If the selected subcode page is not displayed in a short time, press button. TV programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press button to display the selected Teletext page.
Connect the External Equipments Before connecting anything Switch off all equipments including the TV. Read the manuals provided with the equipments. To select an AV mode Pressing AV button on the remote control selects one of six AV modes (EXT-1, RGB, EXT-2, EXT-2S, EXT-3 or EXT-4) To return to the TV mode, repeatedly press AV button. EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART) Video input, Audio L/R inputs and RGB inputs are available.
Tips Specifications Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, nonearthed audio equipment or neon lights, etc. ? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.