AV-32/28R4SK / LCT1567-001A-U / All Cover AV-32&28R4SK_Eng.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 2 Tuesday, January 20, 2004 2:30 PM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 3 Tuesday, January 20, 2004 2:30 PM Caution • The woofer unit is mounted on the TV. Always move the TV and woofer unit together when removing the TV from the box, or when moving the woofer unit. • If the TV is tilted during movement the woofer unit may fall. Be careful to keep the TV level when moving it. • Do not grip the woofer unit when moving the TV. • Do not place objects on the woofer unit duct.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 4 Tuesday, January 20, 2004 2:30 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 5 Tuesday, January 20, 2004 2:30 PM CONTENTS Setting up your TV ...................................6 SOUND menu ......................................... 25 Connecting the aerial and video cassette recorder (VCR) ....................................... 6 Connecting the power cord to the AC outlet....................................................... 7 Putting the batteries into the remote control..........................................
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 6 Tuesday, January 20, 2004 2:30 PM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a VCR, follow A → B → C in the diagram opposite.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 7 Tuesday, January 20, 2004 2:30 PM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 8 Tuesday, January 20, 2004 2:30 PM Setting up your TV 3 Press the a button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers (PR). 4 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV TV OK VCR EXIT AUTO PROGRAM D0005-EN CH 24 10% TV OK D0004-EN • To cancel the AUTO PROGRAM function: Press the b button.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 9 Tuesday, January 20, 2004 2:30 PM Setting up your TV • In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 28).
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 10 Tuesday, January 20, 2004 2:30 PM Setting up your TV Pre-set download The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 11 Tuesday, January 20, 2004 2:30 PM TV buttons and functions Turn the main power on Press the main power button on the TV. The power lamp lights red and your TV is in standby mode. To turn the main power off: Press the main power button again. The power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 12 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions 1 2 3 4 5 6 7 8 9 0 P TV MENU Muting button Number buttons c button i (surround) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button Turn the TV on or off from standby mode OK P F.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 13 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT” on page 35. Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the o button: Press the o button to choose an EXT terminal.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 14 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions Information function ZOOM function You can see the current time or the PR LIST. From the PR LIST, you can choose a channel or EXT terminal. You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. Press the h (Information) button to display the information you want to see.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 15 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions 16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen. 16:9 ZOOM SUBTITLE: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 16 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions 2 Press the 6 buttons and choose the surround mode The surround mode changes as follows each time the buttons are pressed. DOLBY PRO LOGIC II MUSIC: Choose when surround speakers (sold separately) are connected. This mode is for use with any stereo music recordings, and provides a wide and deep sound space.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 17 Tuesday, January 20, 2004 2:30 PM Remote control buttons and functions LS: Set the volume for the left surround speaker. RS: Set the volume for the right surround speaker. WOOFER: Set the volume for the sub woofer. DISTANCE: Change the setting according to the distance between the front speaker and the listening point and the distance between the surround speaker and the listening point. Choose from 0, 1.0, 3.0, and 4.5.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 18 Tuesday, January 20, 2004 2:30 PM Teletext function 0 P TV 4 Choose a teletext page by pressing the p p buttons, number buttons or colour buttons AV To return to the TV mode: Press the b button or g (Text) button. MENU OK • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. • The ZOOM function will not work in the TV and text mode or Text mode.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 19 Tuesday, January 20, 2004 2:30 PM Teletext function To call up a stored page: 1 Press the B button to enter the List mode 2 Press a colour button having a stored page Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. Each time you press the E (Reveal) button, text is hidden or revealed To exit the List mode: Press the B button again.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 20 Tuesday, January 20, 2004 2:30 PM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. 3 Press H (Cancel) button to return to a teletext page when the page number is on the screen • The TV mode cannot be resumed by pressing the H (Cancel) button.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 21 Tuesday, January 20, 2004 2:30 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 22 Tuesday, January 20, 2004 2:30 PM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 23 Tuesday, January 20, 2004 2:30 PM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. FEATURES AUTO VNR COLOUR SYSTEM 4:3 AUTO ASPECT TV MIN OK D1015-EN The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 24 Tuesday, January 20, 2004 2:30 PM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio).
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 25 Tuesday, January 20, 2004 2:30 PM SOUND menu SURROUND MODE SOUND STEREO/ BASS TREBLE BALANCE SURROUND MODE TV SPEAKER TV Choose and set the surround mode. L/C/R OK 1 Choose the SURROUND MODE, and then press the a or 3 button The SURROUND MODE menu appears. D0019-EK SURROUND MODE STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 26 Tuesday, January 20, 2004 2:30 PM FEATURES menu BLUE BACK FEATURES SLEEP TIMER BLUE BACK CHILD LOCK TV You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON OK D0023-EN ON: This function is turned on. SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 27 Tuesday, January 20, 2004 2:30 PM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 1 2 3 4 5 6 TV ID CH/CC BBC1 CH CH CH CH CH CH OK 2 Press the h (Information) button to display “ID NO.” (ID No. input screen) 5 ID NO.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 28 Tuesday, January 20, 2004 2:30 PM SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE DECODER(EXT-2) EXT SETTING PICTURE TILT TV OFF OK D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 7). To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 29 Tuesday, January 20, 2004 2:30 PM SET UP menu Basic operation MOVE 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 30 Tuesday, January 20, 2004 2:30 PM SET UP menu ID 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 31 Tuesday, January 20, 2004 2:30 PM SET UP menu 3 Press the number buttons to enter the remaining CH number • You cannot enter CC numbers. The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen. • The CH number is a number given to each broadcast frequency that carries a TV channel.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 32 Tuesday, January 20, 2004 2:30 PM SET UP menu LANGUAGE 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears. 5 Press the a button to complete the setting The T-V LINK menu appears. T-V LINK DOWNLOAD TV TV LANGUAGE OK VCR EXIT D0005-EN TV You can send the programme numbers data to a VCR with the T-V LINK function.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 33 Tuesday, January 20, 2004 2:30 PM SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 34 Tuesday, January 20, 2004 2:30 PM SET UP menu ID LIST You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 35 Tuesday, January 20, 2004 2:30 PM SET UP menu PICTURE TILT There are cases where the Earth’s magnetic field may make the picture tilt or make unnatural colours appear in the corner of the screen. If this happens, you can correct it. 1 Choose PICTURE TILT, then press the a or 3 button The sub-menu of the PICTURE TILT function appears. PICTURE TILT TV OK D0018-EN 2 Press the 6 buttons until the picture becomes level.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 37 Tuesday, January 20, 2004 2:30 PM Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “y (S-VIDEO input)” on page 33.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 38 Tuesday, January 20, 2004 2:30 PM Additional preparation Audio amplifier and front speakers You can use external front speakers to listen to the TV sound instead of the TV speakers. Also note that when you want to use the DOLBY PRO LOGIC II MUSIC or DOLBY PRO LOGIC II MOVIE, you can set it to issue sound from both of the TV speakers and external front speakers so that you can listen to spoken dialogues more clearly and easily.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 39 Tuesday, January 20, 2004 2:30 PM Additional preparation Removing and Fitting the Woofer Unit Removing the woofer unit The woofer unit may be removed as necessary. Remove the connector while pushing the connector lever on the WOOFER terminal, lift the woofer, and remove it. Lever Fitting the woofer unit Fit the woofer unit in the reverse order to that described in “Removing the woofer unit”.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 40 Tuesday, January 20, 2004 2:30 PM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 41 Tuesday, January 20, 2004 2:30 PM Troubleshooting • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV. Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 25.
AV-32/28R4SK / LCT1567-001A-U / ENGLISH AV-32&28R4SK_Eng.book Page 42 Tuesday, January 20, 2004 2:30 PM Specifications Item Model AV-32R4SK AV-28R4SK Broadcasting systems Colour systems CCIR I PAL • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies E21-E69 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 220 - 240 V AC, 50 Hz Power consumption 115 W (Standby: 2.7 W) 115 W (Standby: 2.
AV-32/28R4SK / LCT1567-001A-U / All Cover AV-32&28R4SK_Eng.
AV-32/28R4SK / LCT1567-001A-U / All Cover AV-32&28R4SK_Eng.