User's Manual

22
Features
Press to choose a channel, then press
the blue button.
The (locked) mark appears, and the chosen channel
is locked.
• To cancel the Child Lock, press the blue button again.
• Repeat step 4 to lock all channels which you want to
lock.
Press .
This completes the setting.
■ To watch a locked channel
Press the number buttons to choose a locked
channel.
The (locked) mark appears.
Press (Information).
The ID No. input menu appears.
Press the number buttons to enter the ID
number.
The locked channel can now be watched.
If you forget the ID number:
Do steps 1 of “To set the Child Lock”. After confirming
the ID number, press to exit the menu.
When you connect a Decoder to a T-V LINK compatible VCR,
you have to set the Decoder (EXT-2) to ON for watching
scrambled channels.
Choose a scrambled channel.
The scrambled picture appears.
• If the picture is unscrambled you don’t need to
change the Decoder (EXT-2) setting.
Press to display MENU. Then Press
to choose FEATURES.
Press to display the Features menu.
Press to choose DECODER (EXT-2).
Press to choose ON.
Press .
The T-V LINK menu appears.
Press .
The translation of channel data from the TV to the
VCR begins. The display disappears once the data
transmission ends.
• Repeat steps 1 to 7 watch a different channel using
the decoder.
Notes:
• You cannot choose a locked channel using the
buttons on the remote control nor the P buttons on
the TV.
• Even if a locked channel is displayed, the programme
cannot be watched.
4
/
5
OK
/
1
2
3
TV
Decoder (EXT-2)
Note:
• Depending on the type of VCR, the display may
change once data transmission ends.
In this case, refer to the VCR’s manual.
1
2
OK
/
3
OK
4
/
5
/
6
OK
7
OK
eng_AV32-28WFX1EU_P20-34.fm Page 22 Wednesday, February 23, 2000 9:15 AM