LCT1359-001A-U_Cover.
AV-32&28X35HKE.book Page 2 Wednesday, January 29, 2003 9:29 AM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32&28X35HKE.book Page 3 Wednesday, January 29, 2003 9:29 AM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
AV-32&28X35HKE.book Page 4 Wednesday, January 29, 2003 9:29 AM • Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage. • Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs, use only the fixtures provided and follow the installation instructions. • Never allow this equipment to be exposed to rain or moisture.
AV-32&28X35HKE.book Page 5 Wednesday, January 29, 2003 9:29 AM CONTENTS Setting up your TV ...................................6 SOUND SETTING ................................... 24 Connecting the aerial and video cassette recorder (VCR) ....................................... 6 Connecting the power cord to the AC outlet....................................................... 7 Putting the batteries into the remote control...............................................
AV-32&28X35HKE.book Page 6 Wednesday, January 29, 2003 9:29 AM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a VCR, follow A → B → C → D in the diagram opposite.
AV-32&28X35HKE.book Page 7 Wednesday, January 29, 2003 9:29 AM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it goes into the initial setting mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.
AV-32&28X35HKE.book Page 8 Wednesday, January 29, 2003 9:29 AM Setting up your TV 2 Press the a button The LANGUAGE menu appears. LANGUAGE BACK TV OK D0002(E)-EK 3 Press the 6 buttons to choose ENGLISH The on-screen display will then be in English. To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function which follows.
AV-32&28X35HKE.book Page 9 Wednesday, January 29, 2003 9:29 AM Setting up your TV Now, the initial settings are complete, and you can watch the TV • BBC1, BBC2, ITV, Channel 4 and Channel 5 are automatically set to the programme numbers PR1 to PR5. If the TV doesn't receive one of these TV channels, that programme number (PR) will not be set. Programme number PR6 is not normally set.
AV-32&28X35HKE.book Page 10 Wednesday, January 29, 2003 9:29 AM Setting up your TV Direct Rec “What You See Is What You Record” You can easily record to VCR the images that you are watching on the TV. For details, read the manual for your VCR. Use your VCR controls. “VCR IS RECORDING” is displayed.
AV-32&28X35HKE.book Page 11 Wednesday, January 29, 2003 9:29 AM TV buttons and functions Refer to the pages in brackets for details. 1 Remote control sensor 2 Power lamp (7, 11) 3 Main power button (7, 11) 4 Headphone jack (mini jack) (38) 5 P p buttons/ q buttons (12) 6 r (Volume) button (11) 7 EXT-4 terminal (26, 38) Turn the main power on Press the main power button on the TV. The power lamp lights red and your TV is in the standby mode.
AV-32&28X35HKE.
AV-32&28X35HKE.book Page 13 Wednesday, January 29, 2003 9:29 AM Remote control buttons and functions Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (information) button changes the display as follows: PR LIST PR AV 01 02 03 04 05 06 07 08 09 TV -10 ID 12 : 00 BBC1 No display OK +10 D0011-EK 2 Press the 5 and 6 buttons to choose a programme number (PR).
AV-32&28X35HKE.book Page 14 Wednesday, January 29, 2003 9:29 AM Remote control buttons and functions To return to a TV channel: Press the b button, the 6 buttons or the number buttons. To use the programme number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually.
AV-32&28X35HKE.book Page 15 Wednesday, January 29, 2003 9:29 AM Remote control buttons and functions FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. • For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape.
AV-32&28X35HKE.book Page 16 Wednesday, January 29, 2003 9:29 AM Remote control buttons and functions Displaying the current time You can display the current time on the screen. Press the h (Information) button to display the current time Pressing the h (Information) button changes the display as follows: PR LIST PR AV 01 02 03 04 05 06 07 08 09 TV -10 ID BBC1 12 : 00 No indication OK +10 D0011-EK • This TV uses teletext data to set the time.
AV-32&28X35HKE.book Page 17 Wednesday, January 29, 2003 9:29 AM Teletext function P TV • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. • The ZOOM function will not work in the TV and text mode or Text mode. • You cannot operate menus when viewing a teletext programme.
AV-32&28X35HKE.book Page 18 Wednesday, January 29, 2003 9:29 AM Teletext function Hold Size You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the N button You can double the height of the teletext display. Press the R button To cancel the Hold function: Press the N button again.
AV-32&28X35HKE.book Page 19 Wednesday, January 29, 2003 9:29 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32&28X35HKE.book Page 20 Wednesday, January 29, 2003 9:29 AM PICTURE SETTING See “Using the TV’s menu” (page 19) for details of displaying the menu. PICTURE SETTING PICTURE MODE BRIGHT CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. NORMAL BACK TV RESET OK D0014-EN PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpness. STANDARD: Standardizes picture adjustment.
AV-32&28X35HKE.book Page 21 Wednesday, January 29, 2003 9:29 AM PICTURE FEATURES See “Using the TV’s menu” (page 19) for details of displaying the menu. PICTURE FEATURES DIGITAL VNR AUTO DigiPure Pro AUTO COLOUR SYSTEM MOVIE THEATRE AUTO 4:3 AUTO ASPECT PICTIRE TILT BACK TV OK D1015-EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original picture.
AV-32&28X35HKE.book Page 22 Wednesday, January 29, 2003 9:29 AM PICTURE FEATURES MAX: The level of DigiPure effect is set to the maximum. If you set the DigiPure Pro function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX. • The MAX setting is not suitable for lowquality pictures which contain a lot of noise. OFF: The DigiPure Pro function is turned off.
AV-32&28X35HKE.book Page 23 Wednesday, January 29, 2003 9:29 AM PICTURE FEATURES 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM BACK TV OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode.
AV-32&28X35HKE.book Page 24 Wednesday, January 29, 2003 9:29 AM SOUND SETTING See “Using the TV’s menu” (page 19) for details of displaying the menu. Mono sound is converted to simulated stereo for a more enjoyable audio experience. SOUND SETTING STEREO/ BASS TREBLE BALANCE HYPER SOUND OFF ON BACK TV HYPER SOUND OK ON: This function is turned on. OFF: This function is turned off.
AV-32&28X35HKE.book Page 25 Wednesday, January 29, 2003 9:29 AM 3D CINEMA SOUND See “Using the TV’s menu” (page 19) for details of displaying the menu. 3D CINEMA SOUND SURROUND HIGH MEDIUM LOW BASS BOOST HIGH MEDIUM LOW BACK TV OK D0063-EN Adjust the 3D CINEMA SOUND effect. For details on how to turn 3D CINEMA SOUND on and off, read “3D CINEMA SOUND function” (see page 15). • In order to experience true 3D CINEMA SOUND, the audio needs to be stereo sound.
AV-32&28X35HKE.book Page 26 Wednesday, January 29, 2003 9:29 AM EXT SETTING See “Using the TV’s menu” (page 19) for details of displaying the menu. EXT SETTING EXT-1 EXT-3 DUBBING EXT-2 EXT-4 TV BACK TV OK ID LIST S-IN D0020-EN S-IN (S-VIDEO input) You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).
AV-32&28X35HKE.book Page 27 Wednesday, January 29, 2003 9:29 AM EXT SETTING To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting DUBBING You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.
AV-32&28X35HKE.book Page 28 Wednesday, January 29, 2003 9:29 AM FEATURES See “Using the TV’s menu” (page 19) for details of displaying the menu. FEATURES SLEEP TIMER BLUE BACK OFF ON OFF ON CHILD LOCK DECODER(EXT-2) BACK TV OK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A Sub-menu of the SLEEP TIMER function appears.
AV-32&28X35HKE.book Page 29 Wednesday, January 29, 2003 9:29 AM FEATURES 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK ID CH 01 BBC1 CH 21 02 BBC2 CH 22 03 ITV CH 23 04 CH4 CH 24 05 CH5 CH 25 06 CH 26 07 CH 27 08 CH 28 09 CH 29 PR AV BACK TV LOCK OK 3 Press the number buttons to enter the ID number The lock is temporarily released so you can view the TV channel.
AV-32&28X35HKE.book Page 30 Wednesday, January 29, 2003 9:29 AM INSTALL See “Using the TV’s menu” (page 19) for details of displaying the menu. INSTALL LANGUAGE AUTO PROGRAM EDIT / MANUAL BACK TV OK D0029-EN LANGUAGE You can choose the language you want to use for the on-screen display from the language list in a menu. 1 Choose LANGUAGE, then press the a button A sub-menu of the LANGUAGE function appears.
AV-32&28X35HKE.book Page 31 Wednesday, January 29, 2003 9:29 AM INSTALL 3 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV VCR BACK TV OK EXIT D0005-EN 4 If you do not have a T-V LINK compatible VCR connected: Press the b button to leave the T-V LINK menu. The T-V LINK menu disappears and all the settings are completed.
AV-32&28X35HKE.book Page 32 Wednesday, January 29, 2003 9:29 AM INSTALL 2 Follow the description for a function you want to use MOVE: This function changes a programme number (PR) of a TV channel. ID: This function registers a channel name (ID) to a TV channel. INSERT: This function adds a new TV channel in the current programme numbers (PR) list by using the CH number. • You cannot use the INSERT function if you do not know a channel number of a TV channel.
AV-32&28X35HKE.book Page 33 Wednesday, January 29, 2003 9:29 AM INSTALL 3 Press the 6 buttons to choose the first character of a channel name (ID) you want to give the TV channel EDIT PR AV 01 02 03 04 05 06 07 08 09 TV ID BBC1 BBC2 ITV CH4 CH5 M CH CH CH CH CH CH CH CH CH CH BACK OK 21 22 23 24 25 26 27 28 29 ID LIST Preparation: • You need to find the CH number for the TV channel.
Body_Eng.fm Page 34 Thursday, January 30, 2003 2:41 PM INSTALL DELETE CH NUMBER 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen. 2 Press the yellow button to delete the TV channel The TV channel is deleted from the programme numbers (PR) list.
AV-32&28X35HKE.book Page 35 Wednesday, January 29, 2003 9:29 AM Additional menu operations Using the ACI function This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data. Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.
AV-32&28X35HKE.book Page 36 Wednesday, January 29, 2003 9:29 AM Additional menu operations Downloading data to a VCR You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function. • You can only do this when a T-V LINK compatible VCR is connected to the EXT2 terminal. • This only works when the T-V LINK menu is being displayed.
AV-32&28X35HKE.
AV-32&28X35HKE.
AV-32&28X35HKE.book Page 39 Wednesday, January 29, 2003 9:29 AM Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 26.
AV-32&28X35HKE.book Page 40 Wednesday, January 29, 2003 9:29 AM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32&28X35HKE.book Page 41 Wednesday, January 29, 2003 9:29 AM Troubleshooting Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “Sound adjustment” on page 24. • When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 24 to hear the sound more easily by changing it to a mono sound.
AV-32&28X35HKE.book Page 42 Wednesday, January 29, 2003 9:29 AM Specifications Item Model AV-32X35HKE AV-28X35HKE Broadcasting systems CCIR I Colour systems PAL • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
AV-32&28X35HKE.
