Contents COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Safety precautions Preparation 2 3 1 Insert the batteries into the remote control ... 2 Connecting the aerial and VCR .................. 3 Connecting other devices .......................... 4 Connect the power cord to the AC outlet ... 5 Initial setting ...............................................
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where 15 cm good ventilation is unattainable.
Preparation 1 Insert the batteries into the remote control Correctly insert two batteries, observing the , and . polarities and inserting the . end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.
Preparation 2 Connecting the aerial and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. • Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack.
Preparation 3 Connecting other devices If you are not connecting any other devices, skip step 3 and perform step 4. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes or component video signals.
Preparation 5 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
Basic operation 1 Press the POWER button to turn your TV on. POWER DISPLAY MENU CHANNEL • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button - the Number buttons - the TV/VIDEO button VOLUME 2 Select a channel.
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV. If the picture is not clear or no colour appears, change the current colour system to another colour system. Press this button to select the desired mode. DIGITAL ECO SENSOR DISPLAY: The ECO SENSOR function switches on.
Remote control buttons and functions DISPLAY button RETURN + button You can continuously display the current channel number or VIDEO mode on the screen. You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch. Press this button. To set the channel to the Return Channel: To turn the display off, press this button again. • When selecting a VIDEO mode with no signal, indication of the VIDEO mode becomes fixed on the screen.
Viewing teletext programmes Using the List Mode 4 5 6 7 8 9 CHANNEL SCAN RETURN 0 -/-- PICTURE MODE TV/TEXT ECO SENSOR Coloured buttons TEXT HOLD To store the page numbers: OFF TIMER TV/TEXT REVEAL You can store the numbers of your favourite teletext pages in the List mode and call them up quickly using the coloured buttons. REVEAL HOLD INDEX STORE MODE SIZE SUBPAGE CANCEL STORE INDEX CANCEL MODE SUBPAGE SIZE ■ Basic operation 1 Select a TV channel with a teletext programme.
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. You can return to the index page instantly. Each time you press the REVEAL button, text is hidden or revealed. In the List mode: Returns to the page number displayed in the lower left area of the screen. HOLD You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the HOLD button.
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU M buttons to change function settings. DISPLAY button Example: POWER DISPLAY MENU t buttons MENU MENU m buttons CHANNEL Changes the AUTO SHUTOFF setting.
Using the TV’s menus INPUT VNR You can view images from VCRs or other devices connected to your TV. You can reduce picture noise. 1 Press MENU T to display the “MENU 1” menu, then select “INPUT”. MENU 1 TV ON ON 00 INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ 1 Press MENU T to display the “MENU 1” menu, then select “VNR”. MENU INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ EXIT BY DISPLAY 2 Press MENU M to select “VIDEO 1”, “VIDEO 2” or “VIDEO 3”.
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast. You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO SHUTOFF”.
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed. You can adjust the picture as you like. 1 Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY OPERATE BY -+ 1 Press MENU T to display the “MENU 4” menu.
Using the TV’s menus MONO SURROUND AUTO CH PRESET You can enjoy normal monaural sound more by converting it into a stereo-like sound. You can automatically preset all TV channels that can be received by your TV to channels. 1 Press MENU T to display the “MENU 5” menu, then select “MONO SURROUND”. 1 Press MENU T to display the “MENU 3” menu, then select “AUTO CH PRESET”.
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV channels to desired channels. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. MANUAL FINE SKIP SOUND SYSTEM EXIT NO B/G 2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen. EXIT BY DISPLAY 2 Press MENU M. The sub-menu is displayed. MANUAL FINE SKIP SOUND SYSTEM EXIT 1 Press MENU t to select “FINE”.
Using the TV’s menus SKIP LANGUAGE You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. You can select the language for the on-screen display. • Channels to which TV channels have not been preset are automatically set to be skipped. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. 2 Press MENU M. The sub-menu is displayed. 3 Press MENU T to select “SKIP”.
TV buttons and parts Front 1 2 V 3 4 L/MONO 5 6 R IN (VIDEO-3) 7 8 1 2 3 4 5 7 1 2 3 4 5 6 7 8 Headphone jack VIDEO-3 terminal MENU button CHANNEL m buttons 8 VOLUME m buttons TV/VIDEO button POWER lamp Main POWER button Rear VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT OUTPUT Y /V V L / MONO C B L / MONO L R R V CR 1 2 1 VIDEO-1 INPUT terminal 2 COMPONENT (VIDEO-2) INPUT terminal 3 OUTPUT terminal 4 Aerial socket R 3
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 14. You can operate functions in menus using the front control buttons on the TV. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press MENU y repeatedly to display the menu you want to use. 2 Press CHANNEL M to select a channel.
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Connect the power cord to the AC outlet. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Adjust the picture settings. (see page 15.
Specifications TV RF systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input VIDEO-3: VIDEO input, AUDIO L/R input OUTPUT: VIDEO output , AUDIO L/R output Headphone jack: stereo mini jack (3.
Сод О Л О С УК О КС ЛУ бл год с о, о об л о л о JVC. Дл ол о у ос о , о , к к ол о с о л о о , ос с с л л о о д о уко одс о о с ол о . AV-2108TEE AV-2508TEE AV-2908TEE AV-3408TEE л Б о с ос одго о к 2 3 Ос о о о о с ол о К о к фу к$ ул д с $ о ого у л % 7 1 с к б к ул д с о ого у л ......................
л Б о с ос ДУ Д • Дл до о с ос о го л л к о ок л о сл ду до о о д !с до"д л л г . ДОС& • л о сл ду кл скл л о с о к г , ук д с го ко ус . • Сл ду б г о д л к ского о од лк . о кл л о о с л к ск о од сл ду с , д го лку. !г лку о к о од сл ду .
одго о к 1 (с к б к ул д с * о ого у л Сл уд л о с д б к о ук о у собл д оло л у о л у ол ос . О ко б к с л с д. ДОС& : Сл ду у с дос , ук б су к с особу, л о к . , - : • Сл ду с ол о су л б к AA/R6/UM-3. • !сл ул д с о ого у л ло о бо , до с о б к .
одго о к 2 одсо д / (0 • Сл ду о $уко одс о с ол о , ос л с с бо . % од одсо д о о л с о ук ого су к с ос о к с к бо . К о ого, о о бо с ус о л бо с ос о од одсо д . • Сл ду о кл с бо , о сл с л о . • Со д л о од об с о д л о. • ' одсо д о о уко ого бо к л о у сл ду с ол о г до L/MONO.
одго о к 3 одсо д д уг бо о !сл ( одсо д к к д уг с у к у к у 4. бо , ( сл ду о ус у к 3 • Сл ду с ол о голо у) к , обо удо с о г д (д о 3,5 ). Когд ( одсо д у) к , уко коло к л о о кл с . • 3 л OUTPUT од д о уко с г л , ко о ( с о сл ) ( ) л о . ( о дубл о BM, со д с ло OUTPUT.
одго о к 5 - / , / фо , " , о об " Когд л о кл с , к о л с о фо о об ф к JVC. Дл о бо к ого сл ду ол с ук , ко о буду ок к . 1 Сл ду " гл у7 к о ку кл7- л о . Л POWER го с . 'осл ого, к к к о с ф к JVC, л о о ск д к ус о о о .
Ос о о о о с ол о 2 (/бо к л . ■ Сл ду к о ку CHANNEL POWER DISPLAY MENU m. • !сл дл б к ло фу к '$О'УС3H3I с о “Д>”, к л л буд б ос дс о к о к CHANNEL n/,. С . с . 18. ■ Дл! од о к л сл ду # ф о к о к .
К о к фу к* ул д с * о ого у л К о к ECO SENSOR К о к COLOUR SYSTEM ( о л д л о к об о , об к о ск с лс о л ко с ос соо с с ос 8 ( ) ко . ' д о фу к с г у ку гл о бл л к о г л о о . Дл /бо бу ,ого " , сл ду " д у7 к о ку. !сл об ко л сл о ого об , ку8у о у с с у сл ду д уго о о с с о .
К о к фу к* ул д с * о ого у л К о к DISPLAY %о ос о о ок о ку8 го к л л (HД!О к . Сл ду " д у7 к о ку. Дл о кл д о фу к сл ду к о ку о о . •' бо (HД!О б с г л фо о (HД!О с о с к од о . К о к OFF TIMER 2 Когд (/ !д ог ,,у, ко о у7 (/ о с,о , дл ос о к ск о ( , сл ду " д у7 к о ку .
ос,о ог ,, л кс с ол о " , С ск 4 5 6 7 8 9 CHANNEL SCAN RETURN 0 -/-- PICTURE MODE TV/TEXT ECO SENSOR OFF TIMER TV/TEXT K к о к TEXT REVEAL HOLD ( о о ( ) л б с л кс С ск с . ( о слу с о о буд б с о , ол у с к о к .
ос,о ог ,, л кс REVEAL ( ск / ) INDEX ( - ) 0 ко о с л кс сод ск кс ( , о о ос к о ). ( о ок ск кс д с л . К "д/! , когд (/ " , к о ку REVEAL, кс буд оо- д о л бо ок , л бо ск / . ( о г о о у с с у с фо . Сл ду " к о ку INDEX. ( " , “С ск ” с *: (о 8 к о у с , ок о у л о углу к .
с ол о л о ого , 7 Д л о скол ко фу к , ко о ( о у л , с ол у дл ого . Дл ол о ого с ол о с фу к ( ) го л о ( об од о о , к к с ол о . 4 Дл , ус о к фу к* сл ду " к о к MENU M. К о к DISPLAY POWER DISPLAY К о к MENU t MENU К о к MENU m CHANNEL :)"= 2 A О ;КЛ=?)"A) ;КЛ +>:ОК О Д) )< ;КЛ СA"A< ФО" КЛ VIDEO-2 КО: О")" ";< VOLUME ;Б,> D У ,> Л -+ 1 Сл ду " к о к MENU T.
с ол о л о ого , 7 (GОД ( Д О J ( о с о об , ос у 8 (% л д уг ) бо о , одсо д к ( ) у л о у. ( о с )у об 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 1”, , /б “(GОД”. :)"= EОД AД)О L СM> D(16:9) PICTURE TILT ;Б,> D У ,> Л -+ 1 TV КЛ КЛ ;EОД DISPLAY 2 с ол у к о к MENU M, бу с /б “( Д О-1”, “( Д О-2” л “( Д О-3”. 3 л о с с (HД!О .
с ол о л о ого , 7 :(&О (BКЛHN ( о с о с о л о о ского о кл о су с с г л бл л о 15 у со око л о ого 8 . 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 2”, , /б “:(&О (BКЛHN ”. :)"= 2 A О ;КЛ=?)"A) КЛ +>:ОК О Д) )< КЛ СA"A< ФО" КЛ VIDEO-2 КО: О")" ";< ;Б,> D У ,> Л -+ ;EОД DISPLAY 2 Сл ду " MENU M дл /бо “(КЛ”. Дл о кл фу к 1(3О (AКЛN/!0H! сл ду б “ ;КЛ”.
с ол о л о ого , 7 VIDEO-2 (( д о-2 с о!к ) Сл ду с о VIDEO-2 л о соо с с одо д о с г л ) го бо , со д ого с ло VIDEO-2. !сл с о к о д л о, об о с к . 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 2”, , /б “VIDEO-2”. ( о с о к к( с . ;EОД DISPLAY 2 Сл ду /б - VIDEO-2 соо с с одо, д ос г л , л VIDEO-2.
с ол о л о ого , 7 С (ДО С& О ( о улу ) ослу) об ого о о уко ого 8 , го уко о 8 , с од о со с о о . 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 5”, , /б “ С (ДО С& О”. :)"= Б>С ):Б, Б>Л>"С >Q У,О )"D С) ДО С ),)О ;Б,> D У ,> Л -+ 5 :(&О :С& О;К: КЛ КЛ ;EОД DISPLAY 2 Сл ду " MENU M дл /бо “(КЛ”. Дл о кл фу к 'С!(ДО С3!$!О сл ду б “ ;КЛ”.
с ол о л о ого , 7 УN :C :С& О;К: ( о д л о с о у с особо бу л о к л бу о к ло . 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 3”, , /б “ УN :C :С& О;К:”. :)"= 3 A О ">С ,О<К> ,У?">@ ">С ,О<К> @+;К ,УССКA< @+;К )Л) )КС > ,УССКA< ;Б,> D У ,> Л -+ ;EОД DISPLAY 2 Сл ду " MENU M. 0 д с л о с суб . ,У?">@ О?">@ ,О УС A D СAС ):> + УК> ;< A ;Б,> D ,ОГ,.
с ол о л о ого , 7 О УС& &K C4BК ( о с о л о к, об у ( к л б л о у8 . К л , с о о уск, л б к о к CHANNEL m, к о ко CHANNEL SCAN. ( о б д с л . • 'о л к л , ко о л о к л с о , буду о уск с о ск . 1 Сл ду " MENU T дл ого, - об/ о лос “0 H 3”, , сл ду /б “ УN :C :С& О;К:”.
Д л к о к л о д л < од л AV-2908TEE AV-3408TEE> 1 2 V 3 4 L/MONO 5 6 R IN (VIDEO-3) 7 8 < од л AV-2108TEE AV-2508TEE> 1 2 3 4 5 7 1 2 3 4 Г до голо & у( ко л VIDEO-3 К о к MENU К о к CHANNEL m 5 6 7 8 8 К о к VOLUME m К о к TV/VIDEO Л POWER Гл ! к о к кл ! ! 4 д л VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT OUTPUT Y /V V L / MONO C B L / MONO L R R V CR 1 2 1 л VIDEO-1 INPUT 2 л COMPONENT (
с ол о к о ок ( го л о Ос о о о о с ол о • Сл ду удос о с , о фу к @1%ОК О3 Д!3!4 кл - с о “ ;КЛ”. !сл фу к блок о к кл - с о “ КЛ” - л о буд у л с ос дс о к о ок д л . Бол од об у фо с . с . 14 д л “@1%ОК О3 Д!3!4”. 1 Сл ду " CHANNEL M дл кл7- л о , од гос " , го о ос к бо . 2 Сл ду " CHANNEL M дл /бо к л .
Ус с ос ! !сл об о су с у л л о бо , о , л с л о обл од д . !сл обл одол с д осл од о д , о . & л о кл7- с ло о об " • Сл ду гл у к о ку од л к о л о . • Сл ду одсо д л к о о од к оду ого ок . • Сл ду к о ку COLOUR SYSTEM дл бо д уго о о с с . (С . с . 8.
С * ф к * С с ,/ TV RF B, G, I, D, K, K1, M > о / с с ,/ PAL, SECAM, NTSC 3,58:Г#, NTSC 4,43 :Г# , ,/ к л/ - с о / " к к л VHF (VL), сок к л VHF (VH), к л UHF (U). к б л к л с д д с о , су д о г д о .