ENGLISH AV-28E50SK AV-32E50SK INTEGRATED DIGITAL COLOUR TELEVISION D Digital Video Broadcasting INSTRUCTIONS
Contents Remote Control ............................................. 2 Other Features ............................................ 21 TV Buttons and Functions ............................ 3 Analogue Teletext ....................................... 22 Features .......................................................... 4 Peripheral Equipment Connections .......... 23 Safety Precautions ........................................ 4 Rear Panel ....................................................
Remote Control / I = (Stand By) button TV / VCR / DVD Switch Number buttons AV button (EXT1, EXT2, EXT2S, EXT3) Colour buttons MENU = Menu button = Cursor Up button OK button = Cursor Right button BACK = Back button = Volume - /+ buttons GUIDE button SUBTITLE button = Hyper Sound on/off button ZOOM = Zoom button VCR / DVD / Teletext control buttons P buttons = Cursor Down button = Teletext button = Cursor Left button TV / DTV
TV Buttons and Functions ! " # $ Power On / Off Power lamp ! Remote control sensor " Menu # Programme Up/Down $ Volume Up/Down -3- JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 3 24.05.
Features Safety Precautions It is a remote controlled Integrated Digital colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has two Euroconnector sockets for external devices (such as computer, video, video games, audio set, etc.) NICAM Stereo sound system. Teletext (Fastext, Toptext). It is possible to connect headphone. Direct channel access. A.P.S.
8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. X-rays The X-rays generated in this television are shielded sufficiently. 10. Naked Flame Sources Do not place naked flame sources on the apparatus. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays.
Inserting batteries into the remote control Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Remove the battery cover located on the back of the remote control by gently pulling downwards from the indicated part. Insert two AA (R06) or equivalent type batteries inside. Place the batteries in the right directions as seen below. Replace the battery cover.
Initial Settings When the TV is first turned on, it goes into the initial settings mode. Follow the instructions on the screen display to make the initial settings. Note: If the TV does not go into the initial settings mode this is because your TV has already been turned on for the first time. (Perform the factory settings with INSTALLATION (see page 15) in the DTV menu and AUTO STORE (Analogue) (see page 20) in the PROGRAMME menu.
need to set up the programme channels on your VCR manually. The T-V LINK menu will be displayed when you press the This function does not happen if your TVs main power is turned off. Set your TVs main power to on (StandBy Mode). button while PROGRAM menu is displayed. Basic Operations 7 9 /,1. You can operate your TV using both the remote control and onset buttons. '2:1/2$' 79 9&5 2.
Example: PR6 press 6, PR12 press 1 and 2. Press directly the programme number to reselect single digit programmes. Hint: The channel list numbers are assigned by the broadcasters. Because not all channels are broadcast free-to-air and stored by the receiver, the channel list numbers do not run continuously. The fifteenth channel in the list, for example, may not be channel number 15 but channel number 17.
When the SUBTITLE button is pressed again, Subtitle OFF appears and the subtitles disappear. P Programme name and broadcast time Q Brief description of the programme The programme name, broadcast time and a brief description of the programme are displayed for the programme chosen from the channel listings. Choosing Channel 1. Press or buttons to choose the channel. 2. Press OK button. The selected channel is displayed.
DIGITAL TELETEXT Timers (DTV Timer Recording) With Digital terrestrial broadcasting (DVB-T), in addition to pictures and sound, you can also watch digital teletext. Digital teletext is sometimes broadcast at the same time as normal broadcasting. By setting the timer, you can record a Digital terrestrial broadcasting (DVB-T) programme with a VCR connected to EXT.2 while you are out. Before using DTV timer recording, the VCR and TV must be connected correctly.
When recording on a T-V LINK incompatible VCR: e f 3. Use the / buttons, number buttons and OK button to set the timer. When setting the start time and end time, input 1200 for 12:00 PM, 1500 for 3:00 PM and 0000 for 12:00 AM. Press BACK button anytime to cancel the timer settings. Name: Use the / buttons to choose the channel for which the timer is to be set. Press the button. Start: Set the timer start time with the number buttons.
Reactivating the cancelled timer setting Favourite Mode Display the TIMER menu and press the / buttons to choose which timer setting to reactivate. Press the / buttons so that Active appears in the Mode column. Enable/disable the Edit PR List Favourites settings. 1. Press the / buttons and choose Favourite Mode. Configuration 2. Press the / buttons and choose ON or OFF. On: Set the basic setting when watching Digital terrestrial broadcasting (DVB-T).
Manually updating the Digital terrestrial broadcasting (DVB-T) information Press the / buttons and choose Search for New Version, then press the OK button. The Digital terrestrial broadcasting (DVB-T) information is updated. In the future, there is a possibility that Receiver Update function may also be able to be used to update the Digital terrestrial broadcating (DVB-T) software and add new functions. Enter PIN code Choose Enter PIN code to change the PIN code for the Edit PR List menus Lock.
1. Press the / buttons and choose Lock on the bar at the bottom of the screen. 2. Press the / buttons and choose the channel to be locked, and then press the OK button. The Enter PIN code input window appears. 3. Press the number buttons to input the correct PIN code. If you have not changed the PIN code in the CONFIGURATION menus Enter PIN Code (see page 14), input the PIN code you chose. The lock icon appears next to the channel name in the Edit PR List.
Manual Search: Common Interface This is for searching for digital channels on a single broadcast frequency. The frequency channel number (2168) is entered in the box at the top left of the screen and the received signal level and signal quality can be observed on the two bar graphs at the bottom. When OK is pressed, the TV searches that frequency and display a list of the channels found. It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.
Picture Menu Center value is indicated with two reciprocal arrows. 3,&785( %5,*+71(66 &2175$67 &2/285 6+$531(66 7,/7 +8( 3,&785( 02'( &2/285 7(03 5(6(7 Press MENU button, now you are in main menu. In the Main menu, select Picture using or button, then enter the Picture menu by pressing / or OK button.
Sound Menu Setting Treble Press MENU button, now you are in MENU. In the MENU, select SOUND using or button, then enter the sound menu by pressing or button. You can adjust the high tone of the sound. Using or button select Treble. 0(18 3,&785( 6281' )($785( ,167$//$7,21 352*5$00( button to increase treble level. Press button to decrease treble level. To Store the Settings In the Sound Menu, all settings are stored automatically.
Selecting Country Selecting Programme Using To select programme number, you can use button or Digit Buttons. or Press or try settings. button select Country. button to select the desired coun- Menu language can be selected by pressing or Ext-2 Output or button select Ext-2 Output. Press or button to select the source which will be given. From Ext-2 output, either EXT-1, DTV, EXT3 or TV can be selected.
To Store Settings Using or button select Store. Press settings. or button to store Installation menu Programme Menu Press MENU button, now you are in MENU. In the MENU, select PROGRAMME using or button. Then enter the Program menu by pressing or button.
Volume Bar Other Features TV Status Programme Number, Programme Name (or EXT), (they are displayed on the upper left of the screen). The sound indicator is displayed with them too. They are displayed after programme change for 3 seconds. It is displayed in the lower middle of the screen.
REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. PANORAMIC: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. Analogue Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).
To Reveal concealed Information For TOPTEXT Pressing button once will reveal answers on a quiz or games page. If Toptext transmission is present, colour coded buttons will appear in status row. If Toptext transmission is not present, status row will not appear. Pressing answers.
T-V LINK compatible VCR Be sure to connect the T-V LINK compatible VCR to the EXT.2 terminal. If not, the T-V LINK function will not work properly. When connecting a T-V LINK compatible VCR to the EXT.2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the Decoder(EXT2) (see page 19) function for the channel to ON to unscramble a scrambled channel. RGB mode If an equipment can output the RGB signals, connect it to the EXT.1 terminal.
Rear Panel ! " # $% Headphone Video Input EXT3 ! Audio Input (L, R) " CI (Common Interface) Slot # Antenna Socket $ EXT.1 (Scart 1) % EXT.2 (Scart 2) (Use when you record digital broadcasting) - 25 JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 25 24.05.
Peripheral Equipments Antenna Connections 2XWGRRU $QWHQQD &RQQHFWLRQV 9+) DQWHQQD 5RXQG RKP FRD[LDO FDEOH : 9+) 8+) 5HDU RI 79 : 9+) 8+) DQWHQQD )ODW RKP WZLQ OHDG FDEOH 9+) 8+) 5HDU RI 79 5RXQG RKP FRD[LDO FDEOH - 26 JVC-AK49-IDTV-ENG-28&3229W-STEREO-BSI-C1815S-(AV-28&32E50SK)-50066123.p65 26 24.05.
No solution Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to stand-by mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Specifications 0RGHO %URDGFDVWLQJ 6\VWHPV 3$/ , , &KDQQHOV DQG )UHTXHQFLHV 6RXQG 6\VWHP 3RZHU 5HTXLUHPHQWV 3RZHU &RQVXPSWLRQ 3LFWXUH 7XEH 6L]H $XGLR 2XWSXW $9 ( 6. $9 ( 6.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
50066123 ©2005 Victor Company of Japan, Limited 0205MKH-VT-VT
ENGLISH AV-28E88SK AV-32E88SK INTEGRATED DIGITAL COLOUR TELEVISION D Digital Video Broadcasting INSTRUCTIONS
Contents Remote Control ............................................. 2 Other Features ............................................ 21 TV Buttons and Functions ............................ 3 Analogue Teletext ....................................... 22 Features .......................................................... 4 Peripheral Equipment Connections .......... 23 Safety Precautions ........................................ 4 Rear Panel ....................................................
Remote Control / I = (Stand By) button TV / VCR / DVD Switch Number buttons AV button (EXT1, EXT2, EXT2S, EXT3) Colour buttons MENU = Menu button = Cursor Up button OK button = Cursor Right button BACK = Back button = Volume - /+ buttons GUIDE button SUBTITLE button = Dolby Virtual on/off button ZOOM = Zoom button VCR / DVD / Teletext control buttons P buttons = Cursor Down button = Teletext button = Cursor Left button TV /
TV Buttons and Functions ! " # $ Power On / Off Power lamp ! Remote control sensor " Menu # Programme Up/Down $ Volume Up/Down -3- JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 3 24.05.
Features Safety Precautions It is a remote controlled Integrated Digital colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system. It has two Euroconnector sockets for external devices (such as computer, video, video games, audio set, etc.) NICAM stereo sound system. Dolby Virtual.* Teletext (Fastext, Toptext). It is possible to connect headphone. Direct channel access.
8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. X-rays The X-rays generated in this television are shielded sufficiently. 10. Naked Flame Sources Do not place naked flame sources on the apparatus. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays.
Inserting batteries into the remote control Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Remove the battery cover located on the back of the remote control by gently pulling downwards from the indicated part. Insert two AA (R06) or equivalent type batteries inside. Place the batteries in the right directions as seen below. Replace the battery cover.
Initial Settings When the TV is first turned on, it goes into the initial settings mode. Follow the instructions on the screen display to make the initial settings. Note: If the TV does not go into the initial settings mode this is because your TV has already been turned on for the first time. (Perform the factory settings with INSTALLATION (see page 15) in the DTV menu and AUTO STORE (Analogue) (see page 20) in the PROGRAM menu.
need to set up the programme channels on your VCR manually. The T-V LINK menu will be displayed when you press the This function does not happen if your TVs main power is turned off. Set your TVs main power to on (StandBy Mode). button while PROGRAM menu is displayed. Basic Operations 7 9 /,1. You can operate your TV using both the remote control and onset buttons. '2:1/2$' 79 9&5 2.
Example: PR6 press 6, PR12 press 1 and 2. Press directly the programme number to reselect single digit programmes. Hint: The channel list numbers are assigned by the broadcasters. Because not all channels are broadcast free-to-air and stored by the receiver, the channel list numbers do not run continuously. The fifteenth channel in the list, for example, may not be channel number 15 but channel number 17.
When the SUBTITLE button is pressed again, Subtitle OFF appears and the subtitles disappear. P Programme name and broadcast time Q Brief description of the programme The programme name, broadcast time and a brief description of the programme are displayed for the programme chosen from the channel listings. Choosing Channel 1. Press or buttons to choose the channel. 2. Press OK button. The selected channel is displayed.
DIGITAL TELETEXT Timers (DTV Timer Recording) With Digital terrestrial broadcasting (DVB-T), in addition to pictures and sound, you can also watch digital teletext. Digital teletext is sometimes broadcast at the same time as normal broadcasting. By setting the timer, you can record a Digital terrestrial broadcasting (DVB-T) programme with a VCR connected to EXT.2 while you are out. Before using DTV timer recording, the VCR and TV must be connected correctly.
When recording on a T-V LINK incompatible VCR: e f 3. Use the / buttons, number buttons and OK button to set the timer. When setting the start time and end time, input 1200 for 12:00 PM, 1500 for 3:00 PM and 0000 for 12:00 AM. Press BACK button anytime to cancel the timer settings. Name: Use the / buttons to choose the channel for which the timer is to be set. Press the button. Start: Set the timer start time with the number buttons.
Reactivating the cancelled timer setting Favourite Mode Display the TIMER menu and press the / buttons to choose which timer setting to reactivate. Press the / buttons so that Active appears in the Mode column. Enable/disable the Edit PR List Favourites settings. 1. Press the / buttons and choose Favourite Mode. Configuration Set the basic setting when watching Digital terrestrial broadcasting (DVB-T). Choose configuration and press the OK button. CONFIGURATION appears.
Manually updating the Digital terrestrial broadcasting (DVB-T) information Press the / buttons and choose Search for New Version, then press the OK button. The Digital terrestrial broadcasting (DVB-T) information is updated. In the future, there is a possibility that Receiver Update function may also be able to be used to update the Digital terrestrial broadcating (DVB-T) software and add new functions. Enter PIN code Choose Enter PIN code to change the PIN code for the Edit PR List menus Lock.
1. Press the / buttons and choose Lock on the bar at the bottom of the screen. 2. Press the / buttons and choose the channel to be locked, and then press the OK button. The Enter PIN code input window appears. 3. Press the number buttons to input the correct PIN code. If you have not changed the PIN code in the CONFIGURATION menus Enter PIN Code (see page 14), input the PIN code you chose. The lock icon appears next to the channel name in the Edit PR List.
Manual Search: Common Interface This is for searching for digital channels on a single broadcast frequency. The frequency channel number (2168) is entered in the box at the top left of the screen and the received signal level and signal quality can be observed on the two bar graphs at the bottom. When OK is pressed, the TV searches that frequency and display a list of the channels found. It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.
Picture Menu Center value is indicated with two reciprocal arrows. 3,&785( %5,*+71(66 &2175$67 &2/285 6+$531(66 7,/7 +8( 3,&785( 02'( &2/285 7(03 5(6(7 Press MENU button, now you are in main menu. In the Main menu, select Picture using or button, then enter the Picture menu by pressing / or OK button.
Sound Menu Setting Treble Press MENU button, now you are in MENU. In the MENU, select SOUND using or button, then enter the sound menu by pressing or button. You can adjust the high tone of the sound. Using or button select Treble. 0(18 3,&785( 6281' )($785( ,167$//$7,21 352*5$00( button to increase treble level. Press button to decrease treble level. To Store the Settings In the Sound Menu, all settings are stored automatically.
Selecting Country Selecting Programme Using To select programme number, you can use button or Digit Buttons. or Press or try settings. button select Country. button to select the desired coun- Menu language can be selected by pressing or Ext-2 Output or button select Ext-2 Output. Press or button to select the source which will be given. From Ext-2 output, either EXT-1, DTV, EXT3 or TV can be selected.
To Store Settings Using or button select Store. Press settings. or button to store Installation menu Programme Menu Press MENU button, now you are in MENU. In the MENU, select PROGRAMME using or button. Then enter the Program menu by pressing or button.
Volume Bar Other Features TV Status Programme Number, Programme Name (or EXT), (they are displayed on the upper left of the screen). The sound indicator is displayed with them too. They are displayed after programme change for 3 seconds. It is displayed in the lower middle of the screen.
REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. PANORAMIC: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. Analogue Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).
To Reveal concealed Information For TOPTEXT Pressing button once will reveal answers on a quiz or games page. Press button again to allow the next page to be displayed. If Toptext transmission is present, colour coded buttons will appear in status row. If Toptext transmission is not present, status row will not appear. In Toptext mode the or commands will request the next or previous page respectively.
T-V LINK compatible VCR Be sure to connect the T-V LINK compatible VCR to the EXT.2 terminal. If not, the T-V LINK function will not work properly. When connecting a T-V LINK compatible VCR to the EXT.2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the Decoder(EXT2) (see page 19) function for the channel to ON to unscramble a scrambled channel. RGB mode If an equipment can output the RGB signals, connect it to the EXT.1 terminal.
Rear Panel ! " # $% Headphone Video Input EXT3 ! Audio Input (L, R) " CI (Common Interface) Slot # Antenna Socket $ EXT.1 (Scart 1) % EXT.2 (Scart 2) (Use when you record digital broadcasting) - 25 JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 25 24.05.
Peripheral Equipments Antenna Connections 2XWGRRU $QWHQQD &RQQHFWLRQV 9+) DQWHQQD 5RXQG RKP FRD[LDO FDEOH : 9+) 8+) 5HDU RI 79 : 9+) 8+) DQWHQQD )ODW RKP WZLQ OHDG FDEOH 9+) 8+) 5HDU RI 79 5RXQG RKP FRD[LDO FDEOH - 26 JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 26 24.05.
No solution Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to stand-by mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Specifications 0RGHO %URDGFDVWLQJ 6\VWHPV 3$/ , , &KDQQHOV DQG )UHTXHQFLHV 6RXQG 6\VWHP 3RZHU 5HTXLUHPHQWV 3RZHU &RQVXPSWLRQ 3LFWXUH 7XEH 6L]H $XGLR 2XWSXW $9 ( 6. $9 ( 6.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
50062788 ©2005 Victor Company of Japan, Limited 0205MKH-VT-VT