AV-32H5SA / LCT1920-001A-H / All Cover AV-32H5SA_Eng.
AV-32H5SA / LCT1920-001A-H / All Cover LCT1920-001A-H_Cover.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 1 Friday, June 24, 2005 4:48 PM How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 2 Friday, June 24, 2005 4:48 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 3 Friday, June 24, 2005 4:48 PM CONTENTS Setting up your TV ...................................4 PICTURE menu ...................................... 21 Connecting the aerial and VCR ................. 4 Connecting the power cord to the AC outlet....................................................... 5 Putting the batteries into the Remote control..................................................... 5 Initial settings ............................
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 4 Friday, June 24, 2005 4:48 PM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If connecting a VCR, follow A → B → C. Aerial If not connecting a VCR, follow 1.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 5 Friday, June 24, 2005 4:48 PM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 6 Friday, June 24, 2005 4:48 PM Setting up your TV 2 Press the a button The LANGUAGE menu appears. LANGUAGE TV OK D0002(E) -EN AUTO PROGRAM 3 Press the 5 and 6 buttons to choose ENGLISH. Then press the a button English is set for the on-screen display description. The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function. There are two COUNTRY menus.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 7 Friday, June 24, 2005 4:48 PM Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV TV RECORDING DEVICE OK EXIT D0005-EN 7 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 8 Friday, June 24, 2005 4:48 PM Setting up your TV 2 When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation When the “Initial settings” has been made: Return to step 6 of “Initial settings” on page 5. When the “AUTO PROGRAM” has been made: Return to step 6 of “Initial settings” on page 5.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 9 Friday, June 24, 2005 4:48 PM Setting up your TV T-V LINK FUNCTIONS When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK functions: A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 10 Friday, June 24, 2005 4:48 PM Setting up your TV TV Auto Power On/VCR Image View When the VCR starts playing, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen. When the VCR menu is operated, the TV automatically turns on and the images from EXT-2 terminal are displayed on the screen. • This function does not operate if your TV’s main power is turned off.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 11 Friday, June 24, 2005 4:48 PM TV buttons and functions Turn the Main power on Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 12 Friday, June 24, 2005 4:48 PM Remote control buttons and functions 1 2 3 4 5 6 7 8 9 0 P TV AV MENU 1 2 3 4 5 6 7 8 9 0 = ~ Muting button Number buttons c button i (hyper sound) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button Turn the TV on or off from standby mode OK P F.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 13 Friday, June 24, 2005 4:48 PM Remote control buttons and functions Use the 6 buttons: Press the 6 buttons to choose the programme number (PR) you want. Use the PR LIST: 1 Press the h (Information) button to display the PR LIST Pressing the h (Information) button changes the display as follows: Watch images from external devices Use the o button: Press the o button to choose an EXT terminal.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 14 Friday, June 24, 2005 4:48 PM Remote control buttons and functions To return to a TV channel: Press the b button, the 6 buttons or the Number buttons. To use the Programme number PR 0 (AV): When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL” on page 28.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 15 Friday, June 24, 2005 4:48 PM Remote control buttons and functions ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: For any picture format except Normal Picture (4:3 Aspect Ratio), the picture will be automatically displayed in the optimum screen size.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 16 Friday, June 24, 2005 4:48 PM Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indication Indicator is displayed.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 17 Friday, June 24, 2005 4:48 PM Teletext function 0 P TV 4 Choose a teletext page by pressing the 6 buttons, Number buttons or Colour buttons AV To return to the TV mode: Press the b button or g (Text) button. MENU OK P F.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 18 Friday, June 24, 2005 4:48 PM Teletext function 3 Press and hold down A (Store) button The four page numbers blink white to indicate that they are stored in memory. To call up a stored page: 1 Press the B button to engage the List mode Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 19 Friday, June 24, 2005 4:48 PM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 20 Friday, June 24, 2005 4:48 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 21 Friday, June 24, 2005 4:48 PM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET D0014 -EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 22 Friday, June 24, 2005 4:48 PM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 23 Friday, June 24, 2005 4:48 PM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). 1 Choose 4:3 AUTO ASPECT then press the a button 4:3 AUTO ASPECT PANORAMIC REGULAR 14:9 ZOOM TV OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 24 Friday, June 24, 2005 4:48 PM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE HYPER SOUND TV OFF OK You can adjust the volume balance between the left and right speaker. 2 : turn the left speaker’s volume level up. 3 : turn the right speaker’s volume level up. D0019-EN STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 25 Friday, June 24, 2005 4:48 PM FEATURES menu To cancel the SLEEP TIMER function: Press the 2 button to set a period of time to “OFF”. FEATURES SLEEP TIMER CHILD LOCK BLUE BACK TV ON OK CHILD LOCK D0023-EN SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER, then press the a button A Sub-menu of the SLEEP TIMER function appears.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 26 Friday, June 24, 2005 4:48 PM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 1 2 3 4 5 6 7 8 9 TV ID CH/CC BBC1 CH CH CH CH CH CH CH CH CH OK 5 ID NO.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 27 Friday, June 24, 2005 4:48 PM FEATURES menu BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 28 Friday, June 24, 2005 4:48 PM SET UP menu EDIT/MANUAL SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE PICTURE TILT DECODER(EXT-2) EXT SETTING TV The EDIT/MANUAL functions are divided into two types: editing of the current Programme numbers (PR) (EDIT functions) and manual registration of a TV channel you want to view to the Programme number (PR) (MANUAL function).
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 29 Friday, June 24, 2005 4:48 PM SET UP menu ID: This function registers a Channel name (ID) to a TV channel. INSERT: This function adds a new TV channel in the current Programme numbers (PR) list by using the CH/CC number. • You cannot use the INSERT function if you do not know a Channel number of a TV channel. Use the MANUAL function to register a TV channel in the Programme number (PR). DELETE: This function deletes an unnecessary TV channel.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 30 Friday, June 24, 2005 4:48 PM SET UP menu ID 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 31 Friday, June 24, 2005 4:48 PM SET UP menu 3 Press the 6 buttons to choose “CC” or “CH” according to the CH/ CC number of the TV channel To cancel the INSERT function: Press the h (Information) button. 4 Press the Number buttons to enter the remaining CH/CC number The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 32 Friday, June 24, 2005 4:48 PM SET UP menu 4 Press the green or red button to search for a TV channel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to finetune the TV channel.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 33 Friday, June 24, 2005 4:48 PM SET UP menu DECODER (EXT-2) When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT2) function to unscramble the scrambled TV channels. 1 Turn on the Decoder power 2 Display the TV channel capable of being unscrambled with the Decoder on the TV Even if the Decoder is functioning, a scrambled picture appears at this time.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 34 Friday, June 24, 2005 4:48 PM SET UP menu 1 Choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears. EXT SETTING EXT-1 DUBBING EXT-2 EXT-3 EXT-4 TV TV OK ID LIST S-IN 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 35 Friday, June 24, 2005 4:48 PM SET UP menu ID LIST DUBBING You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. 1 Choose an EXT terminal You can choose a signal source to be output from an EXT-2 terminal.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 36 Friday, June 24, 2005 4:48 PM SET UP menu TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 37 Friday, June 24, 2005 4:48 PM Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. In addition, the device settings may be changed depending on the connection method to secure proper operation.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 38 Friday, June 24, 2005 4:48 PM Additional preparation Devices which can output the SVIDEO signal (Y/C signal) such as a S-VHS VCR Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (SVIDEO input)” on page 34.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 39 Friday, June 24, 2005 4:48 PM CH/CC numbers When you want to use the INSERT function on page 30, find the CH/CC number corresponding to the Channel number of the TV channel from this table.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 40 Friday, June 24, 2005 4:48 PM CH/CC numbers • When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/ CC number.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 41 Friday, June 24, 2005 4:48 PM Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 42 Friday, June 24, 2005 4:48 PM Troubleshooting • Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “BRIGHT” and “COLOUR” on page 21 to try to adjust them properly. • Videotaping teletext is not recommended because it may not record correctly. • When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.
AV-32H5SA / LCT1920-001A-H / English AV-32H5SA_Eng.book Page 43 Friday, June 24, 2005 4:48 PM Troubleshooting • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speakers causes such phenomena, use the magnetic-shielded speakers instead. • A picture may be tilted due to the influence of the earth’s magnetism.
AV-32H5SA / LCT1920-001A-H / English Body_Eng.fm Page 44 Thursday, July 7, 2005 9:24 AM Specifications Item Model AV-32H5SA Broadcasting systems CCIR B/G, I, D/K Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
AV-32H5SA / LCT1920-001A-H / All Cover Cover4.
AV-32H5SA / LCT1920-001A-H / All Cover AV-32H5SA_Eng.
