AV-32/28R57SK / LCT1793-001A-U / All Cover LCT1793-001A-U_Cover.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 2 Wednesday, March 30, 2005 2:58 PM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 3 Wednesday, March 30, 2005 2:58 PM How to move the TV When moving the TV, make sure that it is held by two people as shown in the illustration. Be careful not to trap your hands when putting the TV down.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 4 Wednesday, March 30, 2005 2:58 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 5 Wednesday, March 30, 2005 2:58 PM CONTENTS Setting up your TV ...................................6 SOUND menu ......................................... 27 Connecting the aerial and video cassette recorder (VCR) ....................................... 6 Connecting and placing the woofer unit..... 7 Connecting the power cord to the AC outlet.......................................................
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 6 Wednesday, March 30, 2005 2:58 PM Setting up your TV Caution • Turn off all the equipment including the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. If you are connecting a VCR, follow A → B → C in the diagram opposite. If you are not connecting a VCR, follow 1.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 7 Wednesday, March 30, 2005 2:58 PM Setting up your TV Connecting and placing the woofer unit Connect the supplied woofer connector to the woofer terminal on the back of the TV. If the woofer unit is not connected, you will not be able to enjoy the bass sound. • Connect so that the lever is raised. Place the woofer unit within the range of the connection cable.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 8 Wednesday, March 30, 2005 2:58 PM Setting up your TV Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 9 Wednesday, March 30, 2005 2:58 PM Setting up your TV 3 Press the a button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers (PR). 4 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV TV OK RECORDING DEVICE EXIT AUTO PROGRAM D0005-EK CH 24 10% TV OK D0004-EN • To cancel the AUTO PROGRAM function: Press the b button.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 10 Wednesday, March 30, 2005 2:58 PM Setting up your TV • In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 30).
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 11 Wednesday, March 30, 2005 2:58 PM Setting up your TV Pre-set download The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 12 Wednesday, March 30, 2005 2:58 PM TV buttons and functions Turn the main power on Press the main power button on the TV. The power lamp lights red and your TV is in standby mode. To turn the main power off: Press the main power button again. The power lamp goes off. Caution • The main power button on the TV does not fully isolate the TV from the AC supply.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 13 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions 1 2 3 4 5 6 7 8 9 0 P TV AV MENU 1 2 3 4 5 6 7 8 9 0 = ~ Muting button Number buttons c button i (surround) button Information button b button 5 buttons # (standby) button Colour buttons a button 6 buttons VCR/DVD/Teletext control button VCR P DVD switch g (text) button Turn the TV on or off from standby mode OK P F.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 14 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions Choose a TV channel and watch images from external devices • If the picture is tilted, correct it. See “PICTURE TILT (Only for AV32R57SK)” on page 37. Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: • PR 6 → press 6 • PR 12 → press 1 and 2 Use the o button: Press the o button to choose an EXT terminal.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 15 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions Information function ZOOM function You can see the current time or the PR LIST. From the PR LIST, you can choose a channel or EXT terminal. You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. Press the h (Information) button to display the information you want to see.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 16 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions 16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen. 16:9 ZOOM SUBTITLE: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 17 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions DOLBY PRO LOGIC II: This mode will be automatically selected if the programme source does not have 5.1-channel Dolby Digital soundtracks. SOUND FEATURES DOLBY PRO LOGIC DOLBY PRO LOGIC SURROUND OFF TV SURROUND OFF: Choose when you want to stop the surround effect.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 18 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions 2 Press the 6 buttons and choose the surround mode The surround mode changes as follows each time the buttons are pressed. DOLBY PRO LOGIC II MUSIC: This mode is for use with any stereo music recordings, and provides a wide and deep sound space. DOLBY PRO LOGIC II MOVIE: Movie programmes with Dolby* Surround sound are heard with 5.1ch surround sound.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 19 Wednesday, March 30, 2005 2:58 PM Remote control buttons and functions Set while listening to the test tone You can set each speaker while listening to the test tone. • The volume cannot be adjusted while the menu is displayed. Adjust the volume to a suitable level before displaying the menu.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 20 Wednesday, March 30, 2005 2:58 PM Teletext function 0 P TV 4 Choose a teletext page by pressing the p p buttons, number buttons or colour buttons AV To return to the TV mode: Press the b button or g (Text) button. MENU OK • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. • The ZOOM function will not work in the TV and text mode or Text mode.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 21 Wednesday, March 30, 2005 2:58 PM Teletext function To call up a stored page: 1 Press the B button to enter the List mode 2 Press a colour button having a stored page Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. Each time you press the E (Reveal) button, text is hidden or revealed To exit the List mode: Press the B button again.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 22 Wednesday, March 30, 2005 2:58 PM Teletext function Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page number, or press a colour button The TV searches for a teletext page. 2 Press H (Cancel) button The TV programme appears. 3 Press H (Cancel) button to return to a teletext page when the page number is on the screen • The TV mode cannot be resumed by pressing the H (Cancel) button.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 23 Wednesday, March 30, 2005 2:58 PM Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 24 Wednesday, March 30, 2005 2:58 PM PICTURE menu COLOUR PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP. FEATURES TV SOFT NORMAL OK RESET D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 25 Wednesday, March 30, 2005 2:58 PM PICTURE menu COLOUR SYSTEM FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. FEATURES AUTO VNR COLOUR SYSTEM 4:3 AUTO ASPECT TV MIN OK The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 26 Wednesday, March 30, 2005 2:58 PM PICTURE menu 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio).
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 27 Wednesday, March 30, 2005 2:58 PM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE SOUND FEATURES TV SPEAKER TV ON OK D0019-EK • “BALANCE” and “TV SPEAKER” are not displayed when using the DOLBY DIGITAL function or DOLBY PRO LOGIC function. • “SOUND FEATURES” and “TV SPEAKER” are not displayed when the headphones are connected.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 28 Wednesday, March 30, 2005 2:58 PM FEATURES menu BLUE BACK FEATURES SLEEP TIMER BLUE BACK CHILD LOCK TV You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON OK D0023-EN ON: This function is turned on. SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 29 Wednesday, March 30, 2005 2:58 PM FEATURES menu 3 Press the a button The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 1 2 3 4 5 6 TV ID CH BBC1 CH CH CH CH CH CH OK 2 Press the h (Information) button to display “ID NO.” (ID No. input screen) 5 21 22 23 24 25 26 ID NO.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 30 Wednesday, March 30, 2005 2:58 PM SET UP menu SET UP AUTO PROGRAM EDIT/MANUAL LANGUAGE DECODER(EXT-2) EXT SETTING PICTURE TILT TV OFF OK D0029-EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 8). To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 31 Wednesday, March 30, 2005 2:58 PM SET UP menu Basic operation MOVE 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 32 Wednesday, March 30, 2005 2:58 PM SET UP menu ID 1 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 33 Wednesday, March 30, 2005 2:58 PM SET UP menu 3 Press the number buttons to enter the remaining CH number • You cannot enter CC numbers. The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen. • The CH number is a number given to each broadcast frequency that carries a TV channel.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 34 Wednesday, March 30, 2005 2:58 PM SET UP menu LANGUAGE 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears. 5 Press the a button to complete the setting The T-V LINK menu appears. T-V LINK DOWNLOAD TV TV LANGUAGE OK RECORDING DEVICE EXIT D0005-EK TV You can send the programme numbers data to a VCR with the T-V LINK function.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 35 Wednesday, March 30, 2005 2:58 PM SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 36 Wednesday, March 30, 2005 2:58 PM SET UP menu DIGITAL-IN When connecting a device (such as DVD player) which enables Dolby Digital audio signal to be output, you can listen to Dolby Digital audio. Preparation: • In order to listen to Dolby Digital audio, correctly connect a device to the TV in accordance with “Listening to Dolby Digital audio” on page 39.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 37 Wednesday, March 30, 2005 2:58 PM SET UP menu 1 Press the 5 buttons to choose the arrow from the menu EXT SETTING EXT-1 EXT-3 DUBBING EXT-2 EXT-4 TV TV OK D0022-EN 2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 39 Wednesday, March 30, 2005 2:58 PM Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 35.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 40 Wednesday, March 30, 2005 2:58 PM Additional preparation 1 Connect the device to the DIGITAL AUDIO IN terminal with a coaxial cable 1 or optical cable 2 Using additional audio equipments After correctly connecting audio equipments to the TV, use the TV menu to correctly set the functions of the audio equipments.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH Body_Eng.fm Page 41 Monday, April 11, 2005 2:47 PM Additional preparation Surround speakers 1: Connect surround speakers to the TV when you want to use the DOLBY SURROUND function to enjoy surround sound. • Use impedance 8-ohm type. • Pay attention to the positive (+) and negative (-) polarities when connecting surround speakers to your TV. • For the best effect, position the surround speakers at least 1 metre above the heads of seated viewers.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 42 Wednesday, March 30, 2005 2:58 PM Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 43 Wednesday, March 30, 2005 2:58 PM Troubleshooting • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV. Poor sound • Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 27.
AV-32/28R57SK / LCT1793-001A-U / ENGLISH AV-32&28R57SK_Eng.book Page 44 Wednesday, March 30, 2005 2:58 PM Specifications Item Model AV-32R57SK AV-28R57SK Broadcasting systems Colour systems CCIR I PAL • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies E21-E69 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard System) Power requirements 220 - 240 V AC, 50 Hz Power consumption 115 W (Standby: 2.7 W) 115 W (Standby: 2.
AV-32/28R57SK / LCT1793-001A-U / All Cover AV-32&28R57SK_Eng.
AV-32/28R57SK / LCT1793-001A-U / All Cover AV-32&28R57SK_Eng.
AV-32/28R57SK / LCT1793-001A-U / All Cover AV-32&28R57SK_Eng.
AV-32/28R57SK / LCT1793-001A-U / All Cover Cover4.
