Projection Television Users Guide

ManualsBrandsJVC ManualsProjection TVAV 48P775

Initial Setup

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p

picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when

an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of

HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,

the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the M

ENU button

π†

To DIGITAL-IN

√®

To select SIZE1 or SIZE2

Press the MENU button to finish

Digital-In

This feature is used if you have a DTV or HDMI compatible component connected to your TV.

Press the MENU button

π†

To DIGITAL-IN AUDIO

√®

To select ANALOG or DIGITAL

Press the Menu button when ﬁ nished

Notes:

• If your DTV or HDMI component is capable of digital

audio and video, choose DIGITAL. If your DTV or

HDMI component is capable of analog audio and

digital video, choose ANALOG.

• Refer to your DTV or HDMI component’s instruction manual for more information.

• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page

72.

Digital-In Audio

INITIAL SETUP

SELECT OPERATE EXIT

(1/5)

DIGITAL-IN

DIGITAL-IN AUDIO

CENTER CH INPUT

SIZE1

DIGITAL

VIDEO-1 MONITOR OUT

OFF