Manual

Press the ASPECTbutton
• By pressing the ASPECTbutton, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
NTSC, 480i, 480p HD (1080i, 720p) ATSC (480i, 480p)
ATSC (1080i, 720p)
Notes:
• You can also choose the size by pressing the A• buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing MENU• on the front panel and choose a mode by using the CHANNEL
+/- buttons ( • OPERATE • ).
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p).
• If the televison receives a !6:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the televison changed it to FULL automatically, the televison will change to the
aspect mode you choosed.
The MENU button allows you to access JVC_s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics like "Sound Adjust" for specific information on using menus,
This button confirms your selection when you are in one of the onscreen menus.
This button allows you to go back in the menu to change a selection or correct a mistake.