Projection Television Users Guide

Button Functions

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals

of 15 minutes, for a total time of up to 180 minutes.

Press the S

LEEP button

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

You then have 20 seconds to press the S

LEEP button to

delay the shut off for another 15 minutes.

Sleep Timer

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND

0 15 30 45 60 75 90 105 120 135 150 165 180

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a

choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the ML/MTS button

By every press of the ML/MTS button, you change

the mode

Notes:

• When you are receiving a digital broadcast, if there are other languages, you can change the

language by pressing the M

L/MTS button.

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described

on page 62.

• ML/MTS will not work when you are using the Digital-In.

• You can also change the mode by pressing the

π†

buttons.

MTS

STEREO

SAP

MONO

ON AIR

The MUTING button instantly turns the volume down completely when you press it. Press

UTING and the volume level will instantly go to zero. To restore the volume to its previous

level, press MUTING again.

Muting

AV-48\56P775\785 65 9/28/04, 11:19:28 AM