LCT0897_COVER.
WT5EP_EN.book Page 1 Wednesday, December 27, 2000 4:45 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. 2. Avoid damaging the AC plug and power cord. 3.
WT5EP_EN.book Page 2 Wednesday, December 27, 2000 4:45 PM 35(3$5$7,21 ■ &RQQHFWLQJ#WKH#$HULDO#DQG#9&5 If connecting a VCR, follow A → B → C → D. If not connecting a VCR, follow 1 → 2. *1: To operate T-V LINK functions, a T-V LINK compatible VCR must be connected to the EXT-2 terminal on the TV. For details about T-V LINK functions, see “T-V LINK FUNCTIONS” on page 5.
WT5EP_EN.book Page 3 Wednesday, December 27, 2000 4:45 PM PREPARATION ■ ,QLWLDO#6HWWLQJV When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings. 1 Press the Main power button on the TV. The Power lamp lights red (for power on), then green (for TV on) and the JVC logo is displayed.
WT5EP_EN.book Page 4 Wednesday, December 27, 2000 4:45 PM PREPARATION 5 Press the blue button to start the AUTO PROGRAM function. The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). To cancel the AUTO PROGRAM function: Press the è button. 6 After the TV channels have been registered in the Programme numbers (PR), the EDIT menu appears. You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function.
WT5EP_EN.book Page 5 Wednesday, December 27, 2000 4:45 PM 709#/,1.#)81&7,216 When a T-V LINK compatible VCR is connected to the EXT2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK functions: A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable. ■ 3UH0VHW#'RZQORDG Download the registered data on the TV channels from the TV to the VCR.
WT5EP_EN.book Page 6 Wednesday, December 27, 2000 4:45 PM %$6,(5$7,21 ■ 7XUQ#WKH#0DLQ#SRZHU#RQ Press the Main power button on the TV. The Power lamp lights red and your TV is in the standby mode. Note: • If the Power lamp lights green, the TV is already on. To turn the Main power off: Press the Main power button again. The Power lamp goes off. Note: • To save energy, turn the main power off if you are not using the TV for a long period of time.
WT5EP_EN.book Page 7 Wednesday, December 27, 2000 4:45 PM BASIC OPERATION 2 Press the ì and ë buttons to choose a Programme number (PR). Then press the é button. ■ $GMXVW#WKH#YROXPH Press the ì buttons to adjust the volume. Use the PR LIST: 1 Press the å (Information) button to display the PR LIST. 2 Press the ì and ë buttons to choose an EXT terminal. Then press the é button. Note: • The EXT terminals are registered after the Programme number PR 99.
WT5EP_EN.book Page 8 Wednesday, December 27, 2000 4:45 PM BASIC OPERATION ■ 2SHUDWLQJ#ZLWK#WKH#EXWWRQV#RQ#WKH#79 1 Press the P B buttons to turn the TV on from standby mode. 2 Press the P B buttons to choose a Programme number (PR) or an EXT terminal. 3 Press the D (Volume) button and the C buttons to adjust the volume. (Behind the front cover) 1 Press the D (Volume) button. The volume level indicator appears. 2 Press the Cýbuttons while the volume level indicator is displayed.
WT5EP_EN.book Page 9 Wednesday, December 27, 2000 4:45 PM 5(027(#&21752/#%877216#$1'#)81&7,216 1 0XWLQJ#%XWWRQ You can turn the volume off instantly. Press the ã (Muting) button to turn off the Volume. Pressing the ã (Muting) button again resumes the previous Volume level. 2 3 2 1XPEHU#%XWWRQV 4 5 6 You can choose a Programme number (PR) by entering the Programme number. 7 8 9 0 P TV AV MENU OK Example: • PR12 → press ú and ù. • PR6 → press õ.
WT5EP_EN.book Page 10 Wednesday, December 27, 2000 4:45 PM REMOTE CONTROL BUTTONS AND FUNCTIONS PANORAMIC: This mode stretches the left and right sides of a normal picture (4:3 Aspect Ratio) to fill the screen, without making the picture appear unnatural. Note: • The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This mode zooms up the Wide Picture (14:9 Aspect Ratio) to the upper and lower limits of the screen. 2 Press the ë buttons to choose a ZOOM mode. Then press the é button.
WT5EP_EN.book Page 11 Wednesday, December 27, 2000 4:45 PM REMOTE CONTROL BUTTONS AND FUNCTIONS 5#,QIRUPDWLRQ#%XWWRQ 8 6WDQGE\#%XWWRQ You can display the PR LIST or the Current Time on the screen. Press the ü (Standby) button to turn the TV on or off. Press the å (Information) button. Pressing the å (Information) button changes the display as follows: When the TV is turned on, the power lamp changes from red to green. 9 &RORXU#%XWWRQV 0 2.
WT5EP_EN.book Page 12 Wednesday, December 27, 2000 4:45 PM REMOTE CONTROL BUTTONS AND FUNCTIONS 7HOHWH[W#&RQWURO#%XWWRQV#DQG#9&5#( #'9'#6ZLWFK #6ZLWFK ■ ~#7HOHWH[W#&RQWURO#%XWWRQV#DQG#9&5# (#'9' P TV Note: • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station, • In the Text mode, the ZOOM mode is fixed to the FULL mode. • No menu operations are possible when viewing a teletext programme.
WT5EP_EN.book Page 13 Wednesday, December 27, 2000 4:45 PM REMOTE CONTROL BUTTONS AND FUNCTIONS 6XE0SDJH &DQFHO Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or view it at any time. You can search for a teletext page while watching TV. 1 Press the î (Sub-page) button to operate the Sub-page function. 2 Press the Number buttons to enter a subExample: • 3rd sub-page → press û, û, û and ø.
WT5EP_EN.book Page 14 Wednesday, December 27, 2000 4:45 PM 0(18#23(5$7,21 This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. 1 Press the é button to display the MENU (main menu). The MENU (main menu) appears. In it, the titles of the menus are displayed. 2 Press the ë buttons to choose a menu title, and press the é button. The menu appears.
WT5EP_EN.book Page 15 Wednesday, December 27, 2000 4:45 PM 3,&785(#6(77,1* Note: • You can change the HUE setting (picture hue) only when the colour system is NTSC 3.58 or NTSC 4.43. To return to the default settings in each TINT mode: 1 Press the é button to display MENU (main menu). 2 Press the ë button to choose PICTURE SETTING, and press the é button. 3 Press the é button to complete the settings. The menu disappears.
WT5EP_EN.book Page 16 Wednesday, December 27, 2000 4:45 PM 3,&785(#)($785(6 ■ &2/285#6<67(0 The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Press the ë buttons to choose COLOUR SYSTEM. Then press the é button. To display the PICTURE FEATURES menu: The Sub-menu of the COLOUR SYSTEM function appears. 1 Press the é button to display MENU (main menu).
WT5EP_EN.book Page 17 Wednesday, December 27, 2000 4:45 PM PICTURE FEATURES ■ 7=6#$872#$63(&7 This function only works when the ZOOM mode is set to AUTO (WSS) mode. It sets the ZOOM mode you want to use for when a WSS signal is not included in the broadcast signal or the signal from an external device. You can choose one of three ZOOM modes. 1 Press the ë buttons to choose 4:3 AUTO ASPECT. Then press the é button.
WT5EP_EN.book Page 18 Wednesday, December 27, 2000 4:45 PM 6281'#6(77,1* ■ +<3(5#6281' You can enjoy sounds with a wider ambience. 1 Press ë buttons to choose HYPER SOUND. 2 Press ì buttons to choose ON. To display the SOUND SETTING menu: 1 Press the é button to display MENU (main menu). 2 Press the ë button to choose SOUND SETTING. Then press the é button. ■ 67(5(2#2#,‡,, When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
WT5EP_EN.book Page 19 Wednesday, December 27, 2000 4:45 PM (;7#6(77,1* 3 Press the é button to complete the setting. The menu disappears. 1 Press the é button to display MENU (main menu). 2 Press the ë button to choose EXT SETTING. Then press the é button. ■ K+609,'(2#LQSXW, When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/C signal) to be output, you can enjoy high-quality picture of the S-VIDEO signal (Y/C signal).
WT5EP_EN.book Page 20 Wednesday, December 27, 2000 4:45 PM EXT SETTING 3 Press the ë buttons to choose a name. Then press the é button. The LIST disappears and the name is assigned to the EXT terminal. To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the é button to complete the setting. The menu disappears. Note: • You cannot assign an EXT terminal name not found in the name list (LIST). ■ '8%%,1* You can choose a signal source to be output from an EXT-2 terminal.
WT5EP_EN.book Page 21 Wednesday, December 27, 2000 4:45 PM )($785(6 ■ %/8(#%$&. You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. 1 Press the ë buttons to choose BLUE BACK. 2 Press the ì buttons to choose ON. 1 Press the é button to display MENU (main menu). 2 Press the ë button to choose FEATURES. Then press the é button. To cancel the BLUE BACK function: Press the ì buttons to choose OFF.
WT5EP_EN.book Page 22 Wednesday, December 27, 2000 4:45 PM FEATURES 5 Press the blue button and set the CHILD LOCK function. @ (CHILD LOCK) appears and the TV channel is locked. To reset the CHILD LOCK function: Press the blue button again. @ (CHILD LOCK) disappears. 6 Press the é button to complete the setting. The menu disappears.
WT5EP_EN.book Page 23 Wednesday, December 27, 2000 4:45 PM ,167$// 3 Press the blue button to start the AUTO PROGRAM function. The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). ENGLISH To display the INSTALL menu: 1 Press the é button to display MENU (main menu). 2 Press the ë button to choose the INSTALL menu. Then press the é button.
WT5EP_EN.book Page 24 Wednesday, December 27, 2000 4:45 PM INSTALL ■ (',720$18$/ The EDIT/MANUAL functions are divided into two types: editing of the current Programme numbers (PR) (EDIT functions) and manual registration of a TV channel you want to view to the Programme number (PR) (MANUAL function). The details about these functions are as follows: MOVE: This function changes a Programme number (PR) of a TV channel.
WT5EP_EN.book Page 25 Wednesday, December 27, 2000 4:45 PM INSTALL ,' 1 Press the ë buttons to choose a TV channel. Every time you press the ë buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen. tion. ,16(57 Preparation: • A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “CH/CC NUMBER” on page 32.
WT5EP_EN.book Page 26 Wednesday, December 27, 2000 4:45 PM INSTALL '(/(7( 1 Press the ë buttons to choose a TV channel. Every time you press the ë buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) appears on the screen. 2 Press the yellow button to delete the TV channel. The TV channel is deleted from the Programme numbers (PR) list. If you do not know the correct broadcasting system, set the SYSTEM to “B/G”.
WT5EP_EN.book Page 27 Wednesday, December 27, 2000 4:45 PM '(02 1 Press the é button to display MENU (main menu). ENGLISH To display the DEMO menu: 2 Press the ë button to choose DEMO. Then press the é button. The DEMO function automatically demonstrates some of the TV functions. 1 Press the ë buttons to choose ON. 2 Press the é button to complete the settings. The DEMO function is set to ON, and the demonstration will start. To stop the demonstration: Press one of the buttons on the remote control.
WT5EP_EN.book Page 28 Wednesday, December 27, 2000 4:45 PM $'',7,21$/#0(18#23(5$7,216 ■ 'RZQORDGLQJ#WKH#GDWD#WR#9&5 You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function. 2 Press the ë buttons to choose AUTO PROGRAM. Then press the é button. A COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function. Caution: • Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.
WT5EP_EN.book Page 29 Wednesday, December 27, 2000 4:45 PM ADDITIONAL MENU OPERATIONS 6 Press the é button to complete the setting. The T-V LINK menu appears. loading the data to VCR” on page 28 to transmit the Programme number (PR) data to the VCR. ENGLISH 7 Follow the operating procedure “Down- 8 If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7.
WT5EP_EN.book Page 30 Wednesday, December 27, 2000 4:45 PM $'',7,21$/#35(3$5$7,21 ■ &RQQHFWLQJ#WKH#H[WHUQDO#GHYLFHV Connect the devices to the TV, paying attention to the Rear panel connections and the Front panel connections. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. In addition, the device settings may be changed depending on the connection method to secure proper operation.
WT5EP_EN.book Page 31 Wednesday, December 27, 2000 4:45 PM ADDITIONAL PREPARATION 'HYLFHV#ZKLFK#FDQ#RXWSXW#WKH# 609,'(2#VLJQDO#+<2VLJQDO,#VXFK#DV D#609+6#9&5 709#/,1.#FRPSDWLEOH#9&5 Be sure to connect the T-V LINK compatible VCR to the EXT2 terminal. If not, the T-V LINK function will not work properly. ENGLISH Connect the device to an EXT terminal other than the EXT-1 terminal. You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal).
WT5EP_EN.book Page 32 Wednesday, December 27, 2000 4:45 PM &+2&´%(5 When you want to use the INSERT function on page 25, find the CH/CC number corresponding to the Channel number of the TV channel from this table.
WT5EP_EN.book Page 33 Wednesday, December 27, 2000 4:45 PM 79#%877216#$1'#3$576 ■ )URQW#3DQHO ENGLISH Push to open (Behind the cover) 5 P ∨/∧ buttons / C buttons 1 Remote control sensor and ECO sensor 2 Headphone jack (mini jack) page 30 3 EXT-4 terminal pages 19 and 30 4D (Volume) button page 8 6 Power lamp pages 3 and 6 7 Main power button pages 3 and 6 page 8 Caution: • Do not grasp the TV by the front panel cover when moving the TV set. If you do, you may break the cover.
WT5EP_EN.book Page 34 Wednesday, December 27, 2000 4:45 PM 7528%/(6+227,1* If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself. Important: • This Troubleshooting guide only covers problems whose cause are not easy to determine.
WT5EP_EN.book Page 35 Wednesday, December 27, 2000 4:45 PM TROUBLESHOOTING 2WKHU#FRQFHUQV • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the ü (Standby) button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem. • If you bring a magnetised device such as a speaker near to your TV, a picture may be warped or unnatural colors appear at he corners of the screen.
WT5EP_EN.book Page 36 Wednesday, December 27, 2000 4:45 PM 63(&,),&$7,216 Model AV28WT5EP* Item AV24WT5EP* Broadcasting systems CCIR B/G, I, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system.
WT5EP_GE.book Page 1 Wednesday, December 27, 2000 4:41 PM Vielen Dank für den Kauf dieses JVC Farbfernsehgerätes. Damit Sie verstehen, wie dieser Fernseher funktioniert, lesen Sie diese Anleitung bitte sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. WARNUNG: UM FEUER ODER ELEKTRISCHEN SCHLAG ZU VERMEIDEN, SOLLTEN SIE DIESES GERÄT KEINEM REGEN ODER FEUCHTIGKEIT AUSSETZEN.
WT5EP_GE.book Page 2 Wednesday, December 27, 2000 4:41 PM 925%(5(,781* ■ $QVFKOLH‰HQ#GHU#$QWHQQH#XQG#GHV#9LGHRUHNRUGHUV Wenn Sie einen Videorekorder anschließen möchten, folgen Sie A → B → C → D. Wenn Sie keinen Videorekorder anschließen möchten, folgen Sie 1 → 2. *1: Um die T-V LINK-Funktionen zu bedienen, muß ein T-V LINK-kompatibler Videorekorder am EXT-2-Anschluß des Fernsehers angeschlossen werden. Für Einzelheiten zu den T-V LINK Funktionen lesen Sie den Abschnitt “T-V LINK FUNKTIONEN” auf Seite 5.
WT5EP_GE1.fm Page 3 Thursday, December 28, 2000 3:28 PM VORBEREITUNG ■ *UXQGHLQVWHOOXQJHQ Wenn der Fernseher zum ersten Mal eingeschaltet wird, schaltet er in den Modus für die Grundeinstellungen, und das JVC-Logo wird angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm, um die Grundeinstellungen vorzunehmen. 1 Drücken Sie den Netzschalter des Fernsehgerätes.
WT5EP_GE1.fm Page 4 Thursday, December 28, 2000 3:28 PM VORBEREITUNG 5 Starten Sie die Funktion AUTO mit der blauen Taste. Das Menü AUTO erscheint, und die empfangenen Fernsehkanäle werden automatisch auf die Programmnummern verteilt und gespeichert (PR). Für Abbruch der AUTO Funktion: Drücken Sie Tasteýè. 6 Sobald die Fernsehkanäle auf den Programmnummern gespeichert sind, (PR), erscheint das Menü SENDER ORDNEN.
WT5EP_GE.book Page 5 Wednesday, December 27, 2000 4:41 PM 709#/,1.#)81.7,21(1 Wenn ein T-V LINK-kompatibler Videorekorder an der Buchse EXT-2 des Fernsehers angeschlossen wird, ist es einfacher, den Rekorder einzustellen und Videos zu betrachten. TV LINK besitzt die folgenden Funktionen: Verwendung der T-V LINK-Funktionen: Ein T-V LINK-kompatibler Videorekorder ist Voraussetzung. Der Videorekorder muß mit einem voll belegten SCART-Kabel an der Buchse EXT-2 am Fernseher angeschlossen sein.
WT5EP_GE.book Page 6 Wednesday, December 27, 2000 4:41 PM $//*(0(,1(#%(',(181* ■ (LQVFKDOWHQ#GHV#*HUlWHV Drücken Sie den Netzschalter am Fernsehgerät. Die Netz-LED leuchtet rot, und Ihr Fernseher ist betriebsbereit (Standby). Hinweis: • Wenn die Netz-LED grün leuchtet, ist das Gerät bereits eingeschaltet. Ausschalten des Geräts: Drücken Sie nochmals den Netzschalter am Fernsehgerät. Die Netz-LED erlischt. Hinweis: • Um Energie zu sparen, schalten Sie das Gerät aus, wenn Sie es längere Zeit nicht benutzen.
WT5EP_GE.book Page 7 Wednesday, December 27, 2000 4:41 PM ALLGEMEINE BEDIENUNG 2 Drücken Sie die Tasten ì und ë, um die gewünschte Programmnummer (PR) zu wählen. Drücken Sie dann die Taste é. Mit den Tasten ë: Drücken Sie die Tasten ë, um eine der EXT-Buchsen zu wählen. Mit der PR LISTE: 1 Drücken Sie die Taste å (Information), so daß die Programmliste (PR LISTE) angezeigt wird. 2 Wählen Sie mit den Tasten ì und ë eine der EXT-Buchsen. Drücken Sie dann die Taste é.
WT5EP_GE.book Page 8 Wednesday, December 27, 2000 4:41 PM ALLGEMEINE BEDIENUNG ■ %HGLHQXQJ#PLW#GHQ#7DVWHQ#DP#)HUQVHKHU 1 Drücken Sie die Tasten P B, um den Fernseher aus der Bereitschaft einzuschalten. 2 Drücken Sie die Tasten P B, um eine Programmnummer (PR) oder einen Eingang EXT zu wählen. 3 Drücken Sie die Taste D (Lautstärke) und die Tasten C, um die Lautstärke einzustellen. 1 Drücken Sie die Taste D (Lautstärke). Es erscheint die Lautstärkeanzeige.
WT5EP_GE1.fm Page 9 Thursday, December 28, 2000 3:28 PM 7$67(1#81'#)81.7,21(1#'(5#)(51%(',(181* 1 6WXPPVFKDOWHWDVWH#+0XWLQJ, Hiermit können Sie die Tonausgabe vorübergehend stummschalten. 2 3 4 5 6 7 8 9 0 P TV Drücken Sie die Taste ã (Muting), um den Ton auszuschalten. Wenn Sie die Taste ã (Muting) nochmals drücken, wird wieder die vorherige Lautstärke eingestellt. 2 =LIIHUQWDVWHQ Hier können Sie eine Programmnummer eingeben (PR). AV MENU OK P F.
WT5EP_GE.book Page 10 Wednesday, December 27, 2000 4:41 PM TASTEN UND FUNKTIONEN DER FERNBEDIENUNG PANORAMIC: Dieser Modus erweitert die linken und rechten Ränder des Normalbildes (4:3) so, daß der Bildschirm ausgefüllt wird, ohne daß das Bild unnatürlich wirkt. Hinweis: • Der obere und der untere Rand des Bildes werden leicht angeschnitten. 14:9 ZOOM: Dieser Modus vergrößert das Breitbild (Seitenverhältnis 14:9) so, daß die oberen und unteren Ränder des Bildes die des Bildschirms erreichen.
WT5EP_GE.book Page 11 Wednesday, December 27, 2000 4:41 PM TASTEN UND FUNKTIONEN DER FERNBEDIENUNG 5#,QIRUPDWLRQVWDVWH 8 6WDQGE\07DVWH Sie können die PR LISTE oder die aktuelle Uhrzeit auf dem Bildschirm darstellen lassen. Drücken Sie die Taste ü (Standby), um das Gerät ein- oder auszuschalten. Drücken Sie die Taste å (Information). Wenn Sie die Taste å (Information) drücken, ändert sich die Anzeige wie folgt: Wenn das Gerät eingeschaltet ist, wechselt die Farbe der Netz-LED von rot zu grün.
WT5EP_GE1.fm Page 12 Thursday, December 28, 2000 3:28 PM TASTEN UND FUNKTIONEN DER FERNBEDIENUNG 2'9'06FKDOWHU 06FKDOWHU ■ ~#7DVWHQ#I•U#GLH#9LGHRWH[W06WHXHUXQJ#XQG#9&52( 7DVWHQ#I•U#GLH#9LGHRWH[W06WHXHUXQJ#XQG#9&52(2'9' P Hinweis: • Wenn Sie beim Empfang von Videotext auf Probleme stoßen, wenden Sie sich an Ihren Händler oder an den betreffenden Sender. • Im Text-Modus ist der ZOOM-Modus auf den VOLLBILD-Modus fixiert. • Die Menübedienung ist nicht möglich, wenn Sie Videotext sehen.
WT5EP_GE.book Page 13 Wednesday, December 27, 2000 4:41 PM TASTEN UND FUNKTIONEN DER FERNBEDIENUNG 8QWHU06HLWHQ $EEUHFKHQ Einige Videotext-Seiten haben Unter-Seiten, die automatisch angezeigt werden. Sie können Unter-Seiten beliebig halten bzw. jederzeit betrachten. Sie können nach einer Videotext-Seite suchen lassen, während Sie fernsehen. 1 Drücken Sie die Taste î (Unter-Seiten), der Seitennummer, oder drücken Sie eine der Farbtasten. um die Unter-Seiten-Funktion aufzurufen. ter-Seitennummer ein.
WT5EP_GE.book Page 14 Wednesday, December 27, 2000 4:41 PM 0(1h%(',(181* Dieses Gerät hat viele Funktionen, die per Menü bedient werden. Um alle Funktionen Ihres Fernsehers nutzen zu können, sollten Sie die grundsätzliche Menübedienung sicher beherrschen. 1 Drücken Sie die Taste é, so daß das Menü MENUE (Hauptmenü) angezeigt wird. Das Menü MENUE erscheint. Dort sind die Titel aller Menüs aufgeführt. 2 Wählen Sie mit den Tasten ë einen Menütitel, und drücken Sie dann die Taste é. Das Menü erscheint.
WT5EP_GE.book Page 15 Wednesday, December 27, 2000 4:41 PM %,/'#(,167(//81* Hinweis: • Sie können die Einstellung FARBTON (Bildfarbintensität) nur ändern, wenn die Bildnorm auf NTSC 3.58 oder NTSC 4.43 eingestellt ist. Aufrufen der Voreinstellungen jedes der FARBTEMP.-Modi: 1 Drücken Sie die Taste é, um das MENUE-Menü (Hauptmenü) aufzurufen. 2 Drücken Sie die Taste ë , um BILD EINSTELLUNG zu wählen, und drücken Sie dann die Taste é. ■ )$5%7(031 Sie können einen von drei FARBTEMP.
WT5EP_GE.book Page 16 Wednesday, December 27, 2000 4:41 PM %,/'#9$5,$17(1 ■ (03)$1*66<67(0 Die Fernsehnorm (bzw. das Farbsystem) wird automatisch gewählt. Wenn das Bild jedoch nicht klar ist, oder keine Farbe erscheint, wählen Sie die Fernsehnorm von Hand. 1 Drücken Sie die Tasten ë , um EMPFANGSSYSTEM zu wählen. Drücken Sie dann die Taste é. Anzeigen des BILD VARIANTEN-Menüs: Das Untermenü der Funktion EMPFANGSSYSTEM erscheint. 1 Drücken Sie die Taste é, um das MENUE-Menü (Hauptmenü) aufzurufen.
WT5EP_GE.book Page 17 Wednesday, December 27, 2000 4:41 PM BILD VARIANTEN ■ 7=6#$872#=220 Diese Funktion arbeitet nur, wenn der ZOOM-Modus auf AUTO(WSS) (Breitbild) gestellt ist. Sie stellt den ZOOM-Modus ein, der gewünscht wird, wenn ein WSS-Signal nicht im Sendesignal oder dem Signal von einem externen Gerät enthalten ist. Sie können einen der drei ZOOM-Modi wählen. Hinweis: • Einzelheiten zum Modus AUTO(WSS) siehe Abschnitt “AUTO(WSS)” unter “3 ZOOM-Taste” auf Seite 9. ZOOM zu wählen.
WT5EP_GE.book Page 18 Wednesday, December 27, 2000 4:41 PM 6281'#(,167(//81* ■ +<3(5#6281' Hier können Sie den Klang akustisch “verbreitern”. 1 Drücken Sie die Tasten ë , um HYPER SOUND zu wählen. Für Abbruch der HYPER SOUND Function: Dücken Sie die Tasten ì, um AUS zu wählen. 2 Drücken Sie die Tasten ì , um EIN zu Anzeigen des SOUND EINSTELLUNG-Menüs: 1 Drücken Sie die Taste é, um das ME- NUE-Menü (Hauptmenü) aufzurufen. 2 Drücken Sie die Taste ë , um SOUND EINSTELLUNG zu wählen.
WT5EP_GE.book Page 19 Wednesday, December 27, 2000 4:41 PM (;7#(,167(//81* 3 Schließen Sie die Einstellung mit der Taste é ab. Das Menü verschwindet. 1 Drücken Sie die Taste é, um das MENUE-Menü (Hauptmenü) aufzurufen. 2 Drücken Sie die Taste ë ,um EXT EINSTELLUNG zu wählen. Drücken Sie dann die Taste é. ■ #K+609,'(20(LQJDQJ, Wenn Sie ein Gerät anschließen (z. B.
WT5EP_GE.book Page 20 Wednesday, December 27, 2000 4:41 PM EXT EINSTELLUNG 3 Drücken Sie die Tasten ë , um einen Namen auszuwählen. Drücken Sie dann die Taste é. Die LISTE verschwindet, und der Name wird dem EXTEingang zugeordnet. Löschen eines gespeicherten EXT-Eingangsnamens: Wählen Sie ein Leerzeichen. 4 Schließen Sie die Einstellung mit der Taste é ab. Das Menü verschwindet. Hinweis: • Sie können keinen Namen für einen EXT-Eingang vergeben, der nicht in der Liste auftaucht (LISTE).
WT5EP_GE.book Page 21 Wednesday, December 27, 2000 4:41 PM )81.7,21(1 ■ %/$80%,/' Sie können das Gerät so einstellen, daß es automatisch auf einen blauen Hintergrund umschaltet und den Ton stummschaltet, wenn nur ein schwaches oder überhaupt kein Signal vorhanden ist, oder wenn kein Signal vom externen Gerät ausgegeben wird. 1 Drücken Sie die Tasten ë, um BLAU-BILD zu wählen. 2 Drücken Sie die Tasten ì , um EIN zu 1 Drücken Sie die Taste é, um das MENUE-Menü (Hauptmenü) aufzurufen.
WT5EP_GE.book Page 22 Wednesday, December 27, 2000 4:41 PM FUNKTIONEN 4 Wählen Sie mit den Tasten ë einen Fernsehkanal. Mit jedem Druck auf die Tasten ë ändert sich die Programmnummer (PR), und das Bild des Senders mit dieser Programmnummer (PR) wird angezeigt. 5 Drücken Sie die blaue Taste und stellen Sie die KINDERSICHERUNG-Funktion ein. @ (KINDERSICHERUNG) erscheint, und der Kanal ist gesperrt. Rücksetzen der KINDERSICHERUNG-Funktion: Drücken Sie die blaue Taste nochmals.
WT5EP_GE.book Page 23 Wednesday, December 27, 2000 4:41 PM 352*5$00,(581* 3 Starten Sie die Funktion AUTO mit der blauen Taste. Das Menü AUTO erscheint, und die empfangenen Fernsehkanäle werden automatisch auf die Programmnummern verteilt und gespeichert (PR). 1 Drücken Sie die Taste é, um das MENUE-Menü (Hauptmenü) aufzurufen. 2 Drücken Sie die Taste ë , um das Menü PROGRAMMIERUNG zu wählen. Drücken Sie dann die Taste é.
WT5EP_GE.book Page 24 Wednesday, December 27, 2000 4:41 PM PROGRAMMIERUNG ■ 6(1'(5#25'1(120$11 Die Funktionen SENDER ORDNEN/MAN. sind in zwei Gruppen eingeteilt: Bearbeitung der aktuellen Programmnummern (PR) (SENDER ORDNEN-Funktionen) und manuelle Speicherung von Fernsehkanälen unter einer Programmnummer (PR) (MANUELL-Funktion). Zu den Funktionen im einzelnen: VERSCH.: Diese Funktion ändert die Programnummer (PR) eines Fernsehkanals.
WT5EP_GE.book Page 25 Wednesday, December 27, 2000 4:41 PM PROGRAMMIERUNG ,' 1 Wählen Sie mit den Tasten ë einen Fernsehkanal. Mit jedem Druck auf die Tasten ë ändert sich die Programmnummer (PR), und das Bild des Senders mit dieser Programmnummer (PR) wird angezeigt. 2 Drücken Sie die rote Taste, um die ID- (,1)h*(1 3 Wählen Sie mit den Tasten ë das erste Zeichen eines Sendernamens (ID), den Sie dem Sender geben möchten.
WT5EP_GE.book Page 26 Wednesday, December 27, 2000 4:41 PM PROGRAMMIERUNG /g6&+(1 1 Wählen Sie mit den Tasten ë einen Fernsehkanal. Mit jedem Druck auf die Tasten ë ändert sich die Programmnummer (PR), und das Bild des Senders mit dieser Programmnummer (PR) wird angezeigt. 2 Löschen Sie den Fernsehkanal mit der gelben Taste. Der Fernsehkanal wird aus der Liste der Programmnummern (PR) gelöscht.
WT5EP_GE.book Page 27 Wednesday, December 27, 2000 4:41 PM '(02 1 Drücken Sie die Taste é , um das MENUE-Menü (Hauptmenü) aufzurufen. DEUTSCH Anzeigen des DEMO-Menüs: 2 Drücken Sie die Taste ë ,um DEMO zu wählen. Drücken Sie dann die Taste é . Die DEMO-Funktion führt automatisch einige der Funktionen des Fernsehgerätes vor. 1 Drücken Sie die Tasten ë , um EIN zu wählen. 2 Schließen Sie die Einstellung mit der Taste é ab. Die Funktion DEMO ist auf EIN eingestellt, und die Vorführung beginnt.
WT5EP_GE.book Page 28 Wednesday, December 27, 2000 4:41 PM =86b7=/,&+(#0(1h)81.7,21(1 ■ +HUXQWHUODGHQ#+'RZQORDG,# GHU#'DWHQ#]XP#9LGHRUHNRUGHU Sie können die aktuellen Daten aller Programmnummern (PR) mit der Funktion T-V LINK an den Videorekorder senden. 2 Drücken Sie die Tasten ë , um AUTO zu wählen. Drücken Sie dann die Taste é . Das Menü LAND erscheint als Untermenü der Funktion AUTO.
WT5EP_GE.book Page 29 Wednesday, December 27, 2000 4:41 PM ZUSÄTZLICHE MENÜFUNKTIONEN 6 Schließen Sie die Einstellung mit der Taste é ab. Das Menü T-V LINK erscheint. “Herunterladen (Download) der Daten zum Videorekorder” auf Seite 28, um die Programmnummer-Daten an den Videorekorder zu übertragen (PR). DEUTSCH 7 Befolgen Sie die Bedienungsschritte unter 8 Wenn es noch weitere Fernsehkanäle gibt, die Ihr Decoder dekodieren kann, wiederholen Sie Schritte 2 bis 7.
WT5EP_GE.book Page 30 Wednesday, December 27, 2000 4:41 PM =86b7=/,&+(#925%(5(,781*(1 ■ $QVFKOX‰#H[WHUQHU#*HUlWH Schließen Sie die Geräte an Ihrem Fernseher an, und beachten Sie, welche Sie an der Rückseite und welche an der Vorderseite angeschlossen werden. Bevor Sie Verbindungen herstellen: • Lesen Sie die Anleitungen aller beteiligten Geräte. Abhängig von den Geräten unterscheidet sich die Anschlußmethode von den gezeigten Lösungen.
WT5EP_GE.book Page 31 Wednesday, December 27, 2000 4:41 PM ZUSÄTZLICHE VORBEREITUNGEN *HUlWH/#GLH#GDV#609,'(206LJQDO#+<2 &06LJQDO,#]1#%1#YRQ#HLQHP#9LGHRUH0 NRUGHU#609+6#DXVJHEHQ#N|QQHQ 709#/,1.0NRPSDWLEOHU#9LGHRUHNRU0 GHU DEUTSCH Schließen Sie das Gerät an einen EXT-Anschluß (mit Ausnahme des EXT-1-Anschlusses) an. Sie können ein Video-Eingangssignal aus dem S-VIDEO-Signal (Y/C-Signal) und dem normalen Videosignal (Composite Video) auswählen.
WT5EP_GE.book Page 32 Wednesday, December 27, 2000 4:41 PM &+2&&01800(5 Wenn Sie die EINFÜGEN-Funktion, beschrieben unter Seite 25 benutzen möchten, finden Sie mit Hilfe dieser Tabelle die CH/ CC-Nummer heraus, die der Kanalnummer des Fernsehkanals entspricht. CH Kan. 02 / Kan. 202 Kan. 03 / Kan. 203 Kan. 04 / Kan. 204 Kan. 05 / Kan. 205 Kan. 06 / Kan. 206 Kan. 07 / Kan. 207 Kan. 08 / Kan. 208 Kan. 09 / Kan. 209 Kan. 10 / Kan. 210 Kan. 11 / Kan. 211 Kan. 12 / Kan. 212 Kan. 21 / Kan. 221 Kan. 22 / Kan.
WT5EP_GE.
WT5EP_GE.book Page 34 Wednesday, December 27, 2000 4:41 PM 352%/(0/g681*(1 Wenn bei der Benutzung Ihres Fernsehgerätes ein Problem auftreten sollte, lesen Sie bitte sorgfältig diese “Problemlösungen” durch, bevor Sie das Gerät in Reparatur geben. Eventuell können Sie das Problem leicht selbst beheben. Wenn z. B. der Netzstecker nicht in der Steckdose steckt, oder, wenn es Probleme mit der Empfangsantenne gibt, könnten Sie irrtümlicherweise annehmen, daß der Fernseher defekt ist.
WT5EP_GE.book Page 35 Wednesday, December 27, 2000 4:41 PM PROBLEMLÖSUNGEN 9HUVFKLHGHQHV • Wenn die Funktion SLEEP TIMER aktiv ist, schaltet sich das Gerät automatisch aus. Wenn dies passiert, drücken Sie die Taste ü (Standby), um den Fernseher wieder einzuschalten. Wenn sich das Gerät nun wieder normal verhält, liegt keine Fehlfunktion vor. • Wenn Sie einen magnetisierten Gegenstand wie z. B.
WT5EP_GE.book Page 36 Wednesday, December 27, 2000 4:41 PM 7(&+1,6&+(#'$7(1 Modell AV28WT5EP* Eintrag AV24WT5EP* Sendesysteme CCIR B/G, I, L Fernsehnormen PAL, SECAM • Die Anschlüsse EXT unterstützen auch das NTSC 3.58/4.43 MHz-System.
WT5EP_FR.book Page 1 Wednesday, December 27, 2000 4:43 PM Merci d’avoir fait l’acquisition de ce téléviseur couleurs JVC. Pour être certain que vous comprenez comment utiliser votre nouveau téléviseur, nous vous conseillons de lire attentivement le présent manuel avant de commencer. AVERTISSEMENT: POUR EVITER TOUT RISQUE D’INCENDIE OU D’ELECTROCUTION, NE JAMAIS EXPOSER CET APPAREIL A LA PLUIE OU A L’HUMIDITE. ATTENTION: 1.
WT5EP_FR.book Page 2 Wednesday, December 27, 2000 4:43 PM 35(3$5$7,21 ■ 5DFFRUGHPHQW#GH#O·DQWHQQH#HW#GX#PDJQpWRVFRSH En cas de raccordement d’un magnétoscope (VCR) suivre les points A → B → C → D. Si vous ne raccordez pas de magnétoscope, suivre les points 1 → 2. *1: Pour pouvoir utiliser les fonctions T-V LINK, il faut raccorder un magnétoscope compatibleT-V LINK à la borne EXT-2 du téléviseur. Pour plus de détails concernant ces fonctions T-V LINK voir “FONCTIONS T-V LINK” à la page 5.
WT5EP_FR.book Page 3 Wednesday, December 27, 2000 4:43 PM PREPARATION ■ 5pJODJHV#LQLWLDX[ A la première mise sous tension du téléviseur, il se met en mode de réglages initiaux et le logo JVC s’affiche. Suivre les instructions qui apparaissent à l’écran pour configurer les réglages initiaux. 1 FRANÇAIS Appuyer sur la touche d’alimentation principale du téléviseur.
WT5EP_FR.book Page 4 Wednesday, December 27, 2000 4:43 PM PREPARATION 5 Appuyer sur la touche bleue pour démarrer la fonction AUTO. Le menu AUTO s’affiche et les chaînes TV reçues sont automatiquement enregistrées sous les numéros de programmes (PR). Pour annuler la fonction AUTO: Appuyer sur la touche è. 6 Lorsque les chaînes TV ont été enregistrées sous les numéros de programmes (PR), le menu EDITER s’affiche.
WT5EP_FR.book Page 5 Wednesday, December 27, 2000 4:43 PM )21&7,216#709#/,1. Lorsqu’un magnétoscope compatible avec les fonctions T-V LINK est raccordé à la borne EXT-2 du téléviseur, les procédures d’installation du magnétoscope et de visualisation de cassettes sont simplifiées. T-V LINK utilise les fonctions suivantes: Pour utiliser les fonctions T-V LINK: Vous devez avoir un magnétoscope compatible T-V LINK.
WT5EP_FR.book Page 6 Wednesday, December 27, 2000 4:43 PM )21&7,211(0(17#'(#%$6( ■ 0HWWUH#O·DSSDUHLO#VRXV#WHQVLRQ Appuyer sur la touche d’alimentation principale du téléviseur. Le témoin d’alimentation rouge s’allume et le téléviseur est alors en mode de veille. Remarque: • Si le témoin d’alimentation vert s’allume, le téléviseur est déjà sous tension. Pour mettre l’appareil hors tension: Réappuyer sur la touche d’alimentation principale du téléviseur. Le témoin d’alimentation s’éteint.
WT5EP_FR.book Page 7 Wednesday, December 27, 2000 4:43 PM FONCTIONNEMENT DE BASE ì et ë pour sélectionner un numéro de programme (PR). Appuyer ensuite sur la touche é. 2 Appuyer sur les touches Utilisation des touches ë: Appuyer sur les touches ë pour sélectionner une borne EXT Utiliser la LISTE PROG.: ■ 5pJODJH#GX#YROXPH Appuyer sur les touches ì pour régler le volume. 1 Appuyer sur la touche å (Information) pour afficher la LISTE PROG..
WT5EP_FR.book Page 8 Wednesday, December 27, 2000 4:43 PM FONCTIONNEMENT DE BASE ■ 0LVH#HQ#IRQFWLRQQHPHQW#j#O·DLGH#GHV#WRXFKHV#GX#WpOpYLVHXU 1 Appuyer sur les touches P B pour mettre le téléviseur sous tension à partir du mode de veille. 2 Appuyer sur les touches P B pour sélectionner un numéro de programme (PR) ou une borne EXT. 3 Appuyer sur la touche D (Volume) et sur les touches C pour régler le volume. 1 Appuyer sur la touche D (Volume). Le témoin de niveau de volume apparaît.
WT5EP_FR.book Page 9 Wednesday, December 27, 2000 4:43 PM 728&+(6#'(#/$#7(/(&200$1'(#(7#/(856#)21&7,216# 1 7RXFKH#G·DVVRXUGLVVHPHQW Vous pouvez couper le volume instantanément. 2 3 4 5 6 7 8 9 0 P TV AV MENU OK 2 7RXFKHV#QXPpULTXHV Vous pouvez sélectionner un numéro de programme (PR) en entrant le numéro du programme. FRANÇAIS FRANCAIS 1 Appuyer sur la touche ã (d’assourdissement) pour couper le volume.
WT5EP_FR.book Page 10 Wednesday, December 27, 2000 4:43 PM TOUCHES DE LA TELECOMMANDE ET LEURS FONCTIONS PANORAMIC: Ce mode étend les côtés gauche et droit d’une image normale afin qu’elle remplisse tout l’écran et sans que l’image paraisse irréelle. Remarque: • Le haut et le bas de l’image sont légèrement coupés. ZOOM 14:9: Ce mode agrandit l’image large (Rapport zoom 14:9) jusqu’aux limites inférieure et supérieure de l’écran 2 Appuyer sur les touches ë pour sélectionner un mode ZOOM.
WT5EP_FR.book Page 11 Wednesday, December 27, 2000 4:43 PM TOUCHES DE LA TELECOMMANDE ET LEURS FONCTIONS 5 7RXFKH#,QIRUPDWLRQ# 8 7RXFKH#6WDQGE\# Vous pouvez afficher la LISTE PROG. ou l’heure à l’écran. Appuyer sur la touche ü (Standby) pour mettre le téléviseur sous ou hors tension. Appuyer sur la touche å (Information). Appuyer sur la touche å (Information) pour modifier l’affichage comme suit: A la mise sous tension du téléviseur, le témoin rouge devient vert. 9 7RXFKH#GH#FRXOHXUV 0 2.
WT5EP_FR.book Page 12 Wednesday, December 27, 2000 4:43 PM TOUCHES DE LA TELECOMMANDE ET LEURS FONCTIONS 7RXFKHV#GH#FRPPDQGH#GX#WpOpWH[WH#HW#VpOHFWHXU##9&5# HW#VpOHFWHXU##9&5#( ■ #~##7RXFKHV#GH#FRPPDQGH#GX#WpOpWH[WH# HW#VpOHFWHXU##9&5#(#'9' P TV Remarque: • Si vous avez des problèmes pour recevoir les émissions de télétexte, consulter votre revendeur local ou l’émetteur du télétexte. • En mode Texte, le mode ZOOM est réglé de manière fixe sur le mode PLEIN ECRAN.
WT5EP_FR1.fm Page 13 Thursday, December 28, 2000 3:24 PM TOUCHES DE LA TELECOMMANDE ET LEURS FONCTIONS 3DJH#VHFRQGDLUH $QQXOHU Certaines pages de télétexte comprennent des pages secondaires qui s’affichent automatiquement. Vous pouvez conserver l’affichage de toute page secondaire ou la regarder à tout moment. Vous pouvez rechercher une page de télétexte tout en regardant la télévision. 1 Appuyer sur la touche î (Page secondai- entrer un numéro de page ou appuyer sur une touche de couleurs.
WT5EP_FR.book Page 14 Wednesday, December 27, 2000 4:43 PM )21&7,211(0(17#'(6#0(186 Ce téléviseur est équipé d’un certain nombre de fonctions que vous pouvez activer ou désactiver à l’aide de menus. Pour tirer le meilleur parti de toutes ses fonctions, il vous faut comprendre complètement le fonctionnement de base des menus. 1 Appuyer sur la touche é pour afficher le MENU (menu principal). Le MENU (menu principal) apparaît. Les titres des menus s’y inscrivent.
WT5EP_FR.book Page 15 Wednesday, December 27, 2000 4:43 PM 5(*/$*(#,0$*( 2 Appuyer sur les touches ì pour modifier le réglage. ï Elément î Inférieur CONTRASTE (contraste de l’image) Supérieur Plus sombre Plus douce 1 Appuyer sur la touche é pour afficher le menu MENU (menu principal). 2 Appuyer sur la touche ë pour sélectionner REGLAGE IMAGE, et appuyer sur la touche é.
WT5EP_FR.book Page 16 Wednesday, December 27, 2000 4:43 PM 237,216#,0$*(# ■ 6<67(0(#&28/(85 Le système couleurs est sélectionné automatiquement. Cependant, si l’image n’est pas nette ou si aucune couleur n’apparaît, il convient de sélectionner le système couleurs manuellement. 1 Appuyer sur les touches ë pour sélectionner SYSTEME COULEUR. Appuyer ensuite sur la touche é.
WT5EP_FR.book Page 17 Wednesday, December 27, 2000 4:43 PM OPTIONS IMAGE ■ =220#$872#7=6 Cette fonction n'est opérationnelle que si le mode ZOOM est réglé sur AUTO(WSS). Elle règle le mode ZOOM que vous voudrez utiliser au cas où il n'y aurait pas de signal WSS dans le signal de diffusion d'un appareil externe. Vous avez le choix entre trois modes ZOOM. 1 Appuyer sur les touches ë pour sélectionner ZOOM AUTO 4:3. Appuyer ensuite sur la touche é.
WT5EP_FR.book Page 18 Wednesday, December 27, 2000 4:43 PM 5(*/$*(#$8',2# ■ +<3(5#6281' Vous pouvez profiter de sons dans un environnement plus étendu. 1 Appuyer sur les touches ë pour sélectionner HYPER SOUND. 2 Appuyer sur les touches ì pour sélec- Pour afficher le menu REGLAGE AUDIO: 1 Appuyer sur la touche é pour afficher le MENU (menu principal). 2 Appuyer sur la touche ë pour sélectionner REGLAGE AUDIO. Appuyer ensuite sur la touche é.
WT5EP_FR.book Page 19 Wednesday, December 27, 2000 4:43 PM (;7#5(*/$*(6 3 Appuyer sur la touche é pour valider le réglage. Le menu disparaît. 1 Appuyer sur la touche é pour afficher le MENU (menu principal). 2 Appuyer sur la touche ë pour sélectionner EXT REGLAGES. Appuyer ensuite sur la touche é.
WT5EP_FR.book Page 20 Wednesday, December 27, 2000 4:43 PM EXT REGLAGES 3 Appuyer sur les touches ë pour sélectionner un nom. Appuyer ensuite sur la touche é. La LISTE disparaît et le nom est assigné à la borne EXT. Pour effacer un nom assigné à une borne EXT: Sélectionner un espace vierge. 4 Appuyer sur la touche é pour valider le réglage. Le menu disparaît. Remarque: • Vous ne pouvez pas assigner à la borne EXT un nom qui n’apparaît pas dans la liste (LISTE).
WT5EP_FR.book Page 21 Wednesday, December 27, 2000 4:43 PM 237,216 ■ )21'#%/(8 Vous pouvez programmer le téléviseur pour que l’écran devienne automatiquement bleu et pour assourdir le son lors de la réception d’un signal trop faible, lorsqu’aucun signal n’est reçu ou lorsqu’il n’y a aucune entrée provenant d’un appareil extérieur. 1 Appuyer sur les touches ë pour sélectionner FOND BLEU. 1 Appuyer sur la touche é pour afficher le MENU (menu principal). 2 Appuyer sur la touche ë pour sélectionner OPTIONS.
WT5EP_FR.book Page 22 Wednesday, December 27, 2000 4:43 PM OPTIONS 4 Appuyer sur les touches ë pour sélectionner une chaîne TV. Chaque fois que vous appuyez sur les touches ë , le numéro de programme (PR) change et l’image de la chaîne TV mémorisée sous ce numéro de programme (PR) apparaît à l’écran. 5 Appuyer sur la touche bleue pour régler la fonction VERROUILLAGE. @ (VERROUILLAGE) s’affiche pour indiquer que cette chaîne TV est verrouillée.
WT5EP_FR.book Page 23 Wednesday, December 27, 2000 4:43 PM ,167$//$7,21 3 Appuyer sur la touche bleue pour démarrer la fonction AUTO. Le menu AUTO s’affiche et les chaînes TV reçues sont automatiquement enregistrées sous les numéros de programmes (PR). 1 Appuyer sur la touche é pour afficher le MENU (menu principal). 2 Appuyer sur la touche ë pour sélectionner le menu INSTALLATION. Appuyer ensuite sur la touche é.
WT5EP_FR.book Page 24 Wednesday, December 27, 2000 4:43 PM INSTALLATION ■ (',7(520$18(/ Les fonctions EDITER/MANUEL sont divisées en deux types: l’édition des numéros de programme sélectionnés (PR) (fonctions EDITER) et l’enregistrement manuel d’une chaîne TV que vous voulez regarder dans un numéro de programmePR MANUEL. Vous trouverez ci-dessous tous les détails concernant ces fonctions: 2 Suivre les explications concernant la fonction que vous souhaitez utiliser.
WT5EP_FR.book Page 25 Wednesday, December 27, 2000 4:43 PM INSTALLATION 1206 1 Appuyer sur les touches ë pour sélectionner une chaîne TV. Chaque fois que vous appuyez sur les touches ë , le numéro de programme (PR) change et l’image de la chaîne TV mémorisée sous ce numéro de programme (PR) apparaît à l’écran. Remarque: • Vous pouvez attribuer un nom de chaîne unique (ID) à cet émetteur TV.
WT5EP_FR.book Page 26 Wednesday, December 27, 2000 4:43 PM INSTALLATION ())$&(5 1 Appuyer sur les touches ë pour sélectionner une chaîne TV. Chaque fois que vous appuyez sur les touches ë, le numéro de programme (PR) change et l’image de la chaîne TV mémorisée sous ce numéro de programme (PR) apparaît à l’écran. 2 Appuyer sur la touche jaune pour supprimer la chaîne TV. La chaîne TV est alors effacée de la liste des numéros de programmes (PR).
WT5EP_FR.book Page 27 Wednesday, December 27, 2000 4:43 PM '(021675$7,21 1 Appuyer sur la touche é pour afficher le MENU (menu principal). 2 Appuyer sur la touche ë pour sélection- FRANÇAIS FRANCAIS Pour afficher le menu DEMONSTRATION: ner DEMONSTRATION. Appuyer ensuite sur la touche é . La fonction DEMONSTRATION propose automatiquement une démonstration de certaines des fonctions du téléviseur. 1 Appuyer sur les touches ë pour sélectionner OUI. 2 Appuyer sur la touche é pour valider les réglages.
WT5EP_FR.book Page 28 Wednesday, December 27, 2000 4:43 PM #23(5$7,216#6833/(0(17$,5(6#'(6#0(186# ■ #7pOpFKDUJHPHQW#GH#GRQQpHV# YHUV#XQ#PDJQpWRVFRSH# Vous pouvez transmettre les dernières informations de numéros de programmes (PR) au magnétoscope à l’aide de la fonction T-V LINK. 2 Appuyer sur les touches ë pour sélectionner AUTO. Appuyer ensuite sur la touche é. Le menu PAYS apparaît en tant que sous-menu de la fonction AUTO.
WT5EP_FR.book Page 29 Wednesday, December 27, 2000 4:43 PM OPERATIONS SUPPLEMENTAIRES DES MENUS 6 Appuyer sur la touche é pour valider le réglage. Le menu T-V LINK apparaît. “Téléchargement de données vers un magnétoscope” à la page 28 pour transmettre les données de numéro de programme (PR) au magnétoscope. FRANÇAIS 7 Suivre les instructions de fonctionnement 8 Si une autre chaîne TV peut être décryptée par le décodeur, répéter les opérations 2 à 7.
WT5EP_FR.book Page 30 Wednesday, December 27, 2000 4:43 PM 35(3$5$7,)6#6833/(0(17$,5(6 ■ 5DFFRUGHPHQW#GHV#DSSDUHLOV#H[WHUQHV# Raccorder les appareils au téléviseur en vérifiant bien les connexions du panneau arrière et de la face avant. Avant de raccorder tout appareil: • Lire les manuels fournis avec les appareils. En fonction des appareils raccordés, la méthode de raccordement peut différer de l’illustration.
WT5EP_FR.book Page 31 Wednesday, December 27, 2000 4:43 PM PREPARATIFS SUPPLEMENTAIRES $SSDUHLOV#SRXYDQW#pPHWWUH#OH#VLJQDO# 609,'(2# +VLJQDO# <2&,# FRPPH# XQ PDJQpWRVFRSH#609+6# 0DJQpWRVFRSH#FRPSDWLEOH#709#/,1. Toujours raccorder le magnétoscope compatible T-V LINK à la borne EXT-2. Sinon, la fonction T-V LINK ne donnera pas les résultats escomptés. FRANÇAIS Raccorder l’appareil à une borne EXT autre que la borne EXT-1.
WT5EP_FR.book Page 32 Wednesday, December 27, 2000 4:43 PM #180(52#&+2&& Pour utiliser la fonction INSERER dans page 25, localiser le numéro CH/CC correspondant au numéro de chaîne de l’émetteur TV dans ce tableau.
WT5EP_FR.
WT5EP_FR.book Page 34 Wednesday, December 27, 2000 4:43 PM *8,'(#'(#'(3$11$*( En cas de problème survenant pendant l’utilisation du téléviseur, veuillez lire ce “Guide de dépannage” attentivement avant de contacter le service technique. Vous pourrez probablement résoudre le problème par vous-même. Exemple: Si la fiche est débranchée de la prise secteur ou si l’antenne TV présente des problèmes, vous pourriez croire que l’anomalie provient du téléviseur.
WT5EP_FR.book Page 35 Wednesday, December 27, 2000 4:43 PM GUIDE DE DEPANNAGE $XWUHV#SUREOqPHV • Lorsque la fonction SLEEP TIMER est utilisée, le téléviseur se met automatiquement hors tension. Si le téléviseur se met tout à coup hors tension, essayer d’appuyer sur la touche ü (Standby) pour le remettre sous tension.Si le téléviseur reprend son état normal, il ne s’agit pas d’une anomalie.
WT5EP_FR.book Page 36 Wednesday, December 27, 2000 4:43 PM #63(&,),&$7,216#7(&+1,48(6 Modèle AV28WT5EP* Elément AV24WT5EP* Systèmes d’émissions CCIR B/G, I, L Systèmes couleurs PAL, SECAM • Les bornes EXT acceptent également le système NTSC 3.58/4.43 MHz.
WT5EP_NL.book Page 1 Wednesday, December 27, 2000 4:38 PM Onze hartelijke dank voor het aanschaffen van deze JVC-kleurentelevisie. Lees deze gebruiksaanwijzing aandachtig door voordat u de TV in gebruik neemt, zodat u zeker weet dat u de TV goed bedient. WAARSCHUWING: OM GEVAAR VOOR BRAND OF ELEKTRISCHE SCHOKKEN TE VOORKOMEN, DIENT U ERVOOR TE ZORGEN DAT DIT APPARAAT NOOIT AAN REGEN OF VOCHTIGHEID WORDT BLOOTGESTELD. LET OP: 1.
WT5EP_NL.book Page 2 Wednesday, December 27, 2000 4:38 PM 9225%(5(,',1*(1 ■ $DQVOXLWHQ#YDQ#GH#DQWHQQH#HQ#GH#YLGHRUHFRUGHU Als u een videorecorder aansluit, volg dan A → B → C → D. Als u geen videorecorder aansluit, volg dan 1 → 2. *1:Om de functies T-V LINK te bedienen, moet er een videorecorder compatibel met T-V LINK worden aangesloten op de EXT-2-aansluiting van de TV. Voor meer details over de T-V LINK-functies, raadpleegt u “T-V LINK FUNCTIES” op pagina 5.
WT5EP_NL.book Page 3 Wednesday, December 27, 2000 4:38 PM VOORBEREIDINGEN ■ %DVLVLQVWHOOLQJHQ Als de TV voor de eerste keer wordt aangezet, komt deze in de stand voor het maken van de basisinstellingen te staan en het JVC-logo verschijnt in beeld. Volg de aanwijzingen op het scherm om de basisinstellingen te maken. 1 Druk de hoofdschakelaar op de TV in. Opmerking: • Als de aan/uit-indicator rood blijft en niet verandert in groen: De TV staat stand-by.
WT5EP_NL.book Page 4 Wednesday, December 27, 2000 4:38 PM VOORBEREIDINGEN 5 Druk op de blauwe toets om de functie AUTOMATISCH te starten. Het menu AUTOMATISCH verschijnt in beeld en de ontvangen TV-kanalen worden automatisch vastgelegd onder de programmanummers (PR). Om de functie AUTOMATISCH te annuleren: Druk op de toets è. 6 Nadat de TV-kanalen zijn vastgelegd onder de programmanummers (PR, verschijnt het menu SORTEREN in beeld.
WT5EP_NL.book Page 5 Wednesday, December 27, 2000 4:38 PM #709#/,1.#)81&7,(6 Als er een videorecorder die compatibel is met T-V LINK is aangesloten op de aansluiting EXT-2 van de TV, is het makkelijker om de videorecorder in te stellen en video’s te bekijken. T-V LINK maakt gebruik van de volgende voorzieningen: Om de functie T-V LINK te gebruiken: De videorecorder moet compatibel zijn met T-V LINK. De videorecorder moet zijn aangesloten op de aansluiting EXT-2 van de TV, via een volledige SCART-kabel.
WT5EP_NL.book Page 6 Wednesday, December 27, 2000 4:38 PM #%$6,6%(',(1,1* ■ =HW#GH#79#DDQ#PHW#GH#KRRIGVFKDNHODDU1 Druk de hoofdschakelaar op de TV in. De aan/uit-indicator licht rood op en de TV staat stand-by. Opmerking: • Als de aan/uit-indicator groen oplicht, staat de TV al aan. Uitzetten van de TV: Druk de hoofdschakelaar op de TV nogmaals in. De aan/uit-indicator dooft.
WT5EP_NL.book Page 7 Wednesday, December 27, 2000 4:38 PM BASISBEDIENING 2 Druk op de ì en ë-toetsen om een programmanummer te kiezen (PR). Druk hierna op de toets é. Gebruik de PR LIJST: 1 Druk op de toets å (Informatie) om de PR LIJST in beeld te brengen. 2 Druk op de ì en ë-toetsen om een EXTaansluiting te kiezen. Druk hierna op de toets é. regelen. Opmerking: • De EXT-aansluitingen zijn vastgelegd na het programmanummer PR 99.
WT5EP_NL.book Page 8 Wednesday, December 27, 2000 4:38 PM BASISBEDIENING ■ %HGLHQLQJ#PHW#GH#WRHWVHQ#YDQ#GH#791# 1 Druk op de P B-toetsen om de TV vanuit de stand-by-stand in te schakelen. 2 Gebruik de P B-toetsen om een programmanummer (PR) of een EXTaansluiting te kiezen. 3 Gebruik de toets D (Volume) en de C -toetsen om het volume te regelen. 1 Druk op de toets D (Volume). De volumeniveau-indicator verschijnt. 2 Gebruik de C -toetsen terwijl de volumeniveau-indicator in beeld is.
WT5EP_NL.book Page 9 Wednesday, December 27, 2000 4:38 PM ##$)67$1'6%(',(1,1*672(76(1#(1#0)81&7,(6 1 #'HPSLQJVWRHWV# U kunt het geluid met één druk op de knop uitschakelen. 2 3 4 5 6 2 1XPPHUWRHWVHQ 7 8 9 0 P TV AV MENU OK U kunt een programmanummer kiezen (PR) door het het programmanummer eenvoudigweg in te voeren. Voorbeeld: • PR12 → druk op ú en ù. • PR6 → druk op õ. U kunt ook herhaaldelijk de toets â indrukken om een EXT-aansluiting te kiezen.
WT5EP_NL.book Page 10 Wednesday, December 27, 2000 4:38 PM AFSTANDSBEDIENINGSTOETSEN EN -FUNCTIES PANORAMIC: In deze stand wordt het normale beeld (4:3 beeldverhouding) uniform naar rechts en links opgerekt totdat het gehele scherm is opgevuld, zonder dat het beeld onnatuurlijk overkomt. Opmerking: • Het beeld wordt aan de bovenkant en de onderkant ietwat afgesneden.
WT5EP_NL.book Page 11 Wednesday, December 27, 2000 4:38 PM AFSTANDSBEDIENINGSTOETSEN EN -FUNCTIES 5#,QIRUPDWLHWRHWV# 8 6WDQG0E\0WRHWV# U kunt de PR LIJST of de huidige tijd in beeld brengen. Druk op de toets ü (Stand-by) om de TV in of uit te schakelen. Druk op de toets å (Informatie). Bij iedere druk op de toets å (Informatie) verandert de aanduiding als volgt: Als de TV wordt ingeschakeld, verandert de aan/uit-indicator van rood naar groen. 9 .OHXUWRHWVHQ 0 2.
WT5EP_NL.book Page 12 Wednesday, December 27, 2000 4:38 PM AFSTANDSBEDIENINGSTOETSEN EN -FUNCTIES #'9'0VFKDNHODDU 0VFKDNHODDU ■ #~#7HOHWHNVW0EHGLHQLQJVWRHWVHQ#HQ#9&5#( 7HOHWHNVW0EHGLHQLQJVWRHWVHQ#HQ#9&5#(#'9' P TV Opmerking: • Als u problemen heeft met de ontvangst van Teletekst-uitzendingen, neem dan contact op met uw dealer of met de kabelexploitant, • Als er is ingesteld op tekst, wordt de ZOOM-instelling vastgezet in de stand FULL. • Als u naar Teletekst kijkt, kunnen de menu’s niet worden bediend.
WT5EP_NL.book Page 13 Wednesday, December 27, 2000 4:38 PM AFSTANDSBEDIENINGSTOETSEN EN -FUNCTIES 6XESDJLQD $QQXOHUHQ Sommige Teletekst-pagina’s bevatten subpagina’s die automatisch in beeld worden gebracht. U kunt iedere gewenste subpagina, op ieder gewenst moment in beeld houden of weer in beeld brengen. U kunt zoeken naar een Teletekst-pagina terwijl u TV kijkt. 1 Druk op de toets î (Subpagina) om de subpagina-functie in te schakelen. het subpaginanummer in te voeren.
WT5EP_NL.book Page 14 Wednesday, December 27, 2000 4:38 PM :(5.(1#0(7#0(18·6 Deze TV beschikt over enkele functies die via menu’s bediend kunnen worden. Om ten volle gebruik te kunnen maken van alle functies van uw TV, dient u de manier waarop de menu’s werken goed te begrijpen. 1 Druk op de toets é om MENU in beeld te brengen (hoofdmenu). Het MENU (hoofdmenu) verschijnt in beeld. In het hoofdmenu vindt u de titels van de andere menu’s.
WT5EP_NL.book Page 15 Wednesday, December 27, 2000 4:38 PM #%((/'#,167(//,1*# Opmerking: • De instelling TINT NTSC (kleurtoon) kan alleen worden gewijzigd als het kleursysteem NTSC 3.58 of NTSC 4.43 is. De standaardinstellingen voor TINT hertellen. 1 Druk op de toets é om het menu in beeld te brengen MENU (hoofdmenu). 2 Druk op de toets ë om BEELD INSTELLING te kiezen en druk op de toets é. 3 Druk op de toets é om de instelling te voltooien. Het menu verdwijnt.
WT5EP_NL.book Page 16 Wednesday, December 27, 2000 4:38 PM #%((/'#02*(/,-.+('(1# ■ ./(856<67((0 Het kleursysteem wordt automatisch gekozen. Als het beeld echter niet helder is of er is geen kleur, stel het kleursysteem dan handmatig in. 1 Gebruik de ë -toetsen om KLEURSYSTEEM te kiezen. Druk hierna op de toets é. Het submenu van de functie KLEURSYSTEEM verschijnt in beeld. Om het menu BEELD MOGELIJKHEDEN in beeld te brengen: 1 Druk op de toets é om het MENU (hoofdmenu) in beeld te brengen.
WT5EP_NL.book Page 17 Wednesday, December 27, 2000 4:38 PM BEELD MOGELIJKHEDEN ■ 7=6#$872#=220 Deze functie werkt alleen wanneer de ZOOM-functie is ingesteld op AUTO(WSS). De functie bepaalt de ZOOM-instelling die u wilt gebruiken wanneer het zendsignaal of het signaal van een extern apparaat geen WSS-signaal bevat. U kunt kiezen uit drie ZOOM-instellingen. 1 Gebruik de ë -toetsen om 4:3 AUTO ZOOM te kiezen. Druk hierna op de toets é. Het submenu van de functie 4:3 AUTO ZOOM verschijnt in beeld.
WT5EP_NL.book Page 18 Wednesday, December 27, 2000 4:38 PM #*(/8,'#,167(//,1*# ■ +<3(5#6281' U kunt genieten van een veel fraaiere geluidsweergave. 1 Gebruik de ë -toetsen om HYPER SOUND te kiezen. 2 Gebruik de ì -toetsen om AAN te kiezen. Om het menu GELUID INSTELLING in beeld te brengen: 1 Druk op de toets é om het MENU (hoofd- menu) in beeld te brengen. 2 Druk op de toets ë om in te stellen op GELUID INSTELLING. Druk hierna op de toets é.
WT5EP_NL.book Page 19 Wednesday, December 27, 2000 4:38 PM (;71#,167(//,1* 3 Druk op de toets é om de instelling te voltooien. Het menu verdwijnt. 1 Druk op de toets é om het MENU (hoofdmenu) in beeld te brengen. 2 Druk op de ë -toets om EXT. INSTELLING te kiezen. Druk hierna op de toets é. ■ #K+609,'(20LQYRHU, Als u apparatuur aansluit (zoals een S-VHS-videorecorder) dat een S-VIDEO-signaal (Y/C-signaal) kan uitsturen, kunt u genieten van de fraaie beeldweergave van het S-VIDEO-signaal (Y/C-signaal).
WT5EP_NL.book Page 20 Wednesday, December 27, 2000 4:38 PM EXT. INSTELLING 3 Gebruik de ë -toetsen om een naam te kiezen. Druk hierna op de toets é. De LIJST verdwijnt en de naam is toegewezen aan de EXT-aansluiting. Om een naam die aan een EXT-aansluiting is toegewezen te wissen: Kies een blanco ruimte. 4 Druk op de toets é om de instelling te voltooien. Het menu verdwijnt. Opmerking: • U kunt geen naam voor een EXT-aansluiting toewijzen die niet voorkomt in de lijst met namen (LIJST).
WT5EP_NL.book Page 21 Wednesday, December 27, 2000 4:38 PM 02*(/,-.+('(1 ■ %/$8:#%((/' U kunt de TV zo instellen dat het scherm blauw en het geluid gedempt wordt, als er geen signaal is of als het signaal heel zwak is of als er geen invoer van een extern apparaat is. 1 Gebruik de ë-toetsen om in te stellen op BLAUW BEELD. 2 Gebruik deì -toetsen om in te stellen op AAN. 1 Druk op de toets é om het MENU (hoofdmenu) in beeld te brengen. 2 Druk op de toets ë om MOGELIJKHEDEN te kiezen.
WT5EP_NL.book Page 22 Wednesday, December 27, 2000 4:38 PM MOGELIJKHEDEN 4 Gebruik de ë -toetsen om een TV-kanaal te kiezen. Iedere keer dat u een toets ë indrukt, verandert het programmanummer (PR) en het beeld van de zender die is vastgelegd onder dat programmanummer (PR) verschijnt op het scherm. 5 Druk op de blauwe toets en schakel de functie KINDERSLOT in. @ (KINDERSLOT) verschijnt en het kanaal is vergrendeld.
WT5EP_NL.book Page 23 Wednesday, December 27, 2000 4:38 PM ,167(//(1 3 Druk op de blauwe toets om de functie AUTOMATISCH in te schakelen. Het menu AUTOMATISCH verschijnt en de ontvangen TV-kanalen worden automatisch vastgelegd onder de programmanummers (PR). 1 Druk op de toets é om het MENU (hoofdmenu) in beeld te brengen. 2 Druk op de toets ë om het menu INSTELLEN te kiezen. Druk hierna op de toets é.
WT5EP_NL.book Page 24 Wednesday, December 27, 2000 4:38 PM INSTELLEN ■ 6257(5(120$18((/ 2 Volg de aanwijzingen voor de functie die u De functies SORTEREN/MANUEEL zijn verdeeld in twee types: bewerken van de programmanummers (PR) (SORTEREN-functies) en handmatig vastleggen van een TV-kanaal onder een programmanummer (PR) (MANUEEL-functie). Hieronder vindt u meer details over deze functies: 3 Druk op de toets é om de instelling te wilt gebruiken en bedien de functie. voltooien.
WT5EP_NL.book Page 25 Wednesday, December 27, 2000 4:38 PM INSTELLEN ,' 1 Gebruik de ë -toetsen om op een TV-kanaal af te stemmen. Iedere keer dat u op een van de ë -toetsen drukt, verandert het programmanummer (PR) en het beeld van het TV-kanaal dat vastligt onder het programmanummer (PR) verschijnt op het scherm. starten. ,192(*(1 Voorbereidingen: • U dient een CH/CC-nummer te vinden dat uniek is voor deze TV en dat correspondeert met het kanaalnummer van de zender.
WT5EP_NL.book Page 26 Wednesday, December 27, 2000 4:38 PM INSTELLEN :,66(1 1 Gebruik de ë-toetsen om op een zender af te stemmen. Iedere keer dat u op een van de ë-toetsen drukt, wordt het programmanummer (PR) gewijzigd en het beeld van de zender die onder dat programmanummer (PR) is vastgelegd, verschijnt op het scherm. 2 Druk op gele toets om het TV-kanaal te wissen. Het TV-kanaal wordt gewist uit de lijst met programmanummers (PR).
WT5EP_NL.book Page 27 Wednesday, December 27, 2000 4:38 PM '(02 1 Druk op de toets é om het MENU (hoofdmenu) in beeld te brengen. 2 Druk op de toets ë om in te stellen op DEMO. Druk hierna op de toets é . NEDERLANDS Om het menu DEMO in beeld te brengen: De functie DEMO demonstreert nu automatisch enkele functies van de TV. 1 Gebruik de ë -toetsen om in te stellen op AAN. 2 Druk op de toets é om de instelling te voltooien. De functie DEMO wordt op AAN gezet en de demonstratie begint.
WT5EP_NL.book Page 28 Wednesday, December 27, 2000 4:38 PM #12*#0((5#0(18·6# ■ #9HUVWXUHQ#YDQ#GH#JHJHYHQV# QDDU#HHQ#YLGHRUHFRUGHU# U kunt de gegevens van de nieuwste programmanummers (PR) naar een videorecorder versturen, met behulp van de functie T-V LINK. 2 Gebruik de ë -toetsen om in te stellen op AUTOMATISCH. Druk hierna op de toets é . Het menu LAND verschijnt als submenu van de functie AUTOMATISCH.
WT5EP_NL.book Page 29 Wednesday, December 27, 2000 4:38 PM NOG MEER MENU’S 6 Druk op de toets é om de instelling te voltooien. Het menu T-V LINK verschijnt in beeld. van de gegevens naar een videorecorder” op pagina 28 om de gegevens van de programmanummers (PR) naar de videorecorder te versturen. NEDERLANDS 7 Volg de bedieningsprocedure “Versturen 8 Als u nog meer zenders kunt ontvangen die gedecodeerd kunnen worden, herhaalt u de stappen 2 t/m 7.
WT5EP_NL.book Page 30 Wednesday, December 27, 2000 4:38 PM #9(5'(5(#9225%(5(,',1*(1# ■ #$DQVOXLWHQ#YDQ#SHULIHUH#DSSDUDWXXU1# Sluit de apparatuur aan op de TV, en let hierbij goed op dat de aansluitingen op het voorpaneel en het achterpaneel op de juiste wijze worden gemaakt. Alvorens een aansluiting te maken: • Lees de gebruiksaanwijzingen van de aan te sluiten apparatuur goed door. De aansluiting zal niet altijd precies zo zijn als hier afgebeeld. Dit is afhankelijk van het apparaat.
WT5EP_NL.book Page 31 Wednesday, December 27, 2000 4:38 PM VERDERE VOORBEREIDINGEN $SSDUDWHQ#GLH#HHQ#609,'(20VLJQDDO +<2&0VLJQDDO,# NXQQHQ# XLWVWXUHQ/ ]RDOV#HHQ#609+60YLGHRUHFRUGHU 9LGHRUHFRUGHU#FRPSDWLEHO#PHW#709 /,1.# Let op dat u de videorecorder die compatibel is met T-V LINK aansluit op de EXT-2-aansluiting. Als u dit niet doet, zal de functie T-V LINK niet goed werken. NEDERLANDS Sluit het apparaat aan op een EXT-aansluiting, maar niet op de EXT-1-aansluiting.
WT5EP_NL.book Page 32 Wednesday, December 27, 2000 4:38 PM #&+2&܈(5 Als u de functie INVOEGEN op pagina 25,wilt gebruiken, zoek dan het CH/CC-nummer dat correspondeert met het TV-kanaal in deze tabel op.
WT5EP_NL.book Page 33 Wednesday, December 27, 2000 4:38 PM 6&+$.
WT5EP_NL.book Page 34 Wednesday, December 27, 2000 4:38 PM #9(5+(/3(1#9$1#6725,1*(1 Als er zich een probleem voordoet met de TV, lees deze paragraaf “Verhelpen van storingen” dan aandachtig door, alvorens de hulp van een vakman in te roepen. U kunt het probleem wellicht heel makkelijk zelf oplossen. Als de netstekker bijvoorbeeld niet in het stopcontact zit, of er is een probleem met de antenne, kunt u snel denken dat de TV zelf kapot is.
WT5EP_NL.book Page 35 Wednesday, December 27, 2000 4:38 PM VERHELPEN VAN STORINGEN 2YHULJH#SUREOHPHQ • Als de functie SLEEP TIMER is ingeschakeld, wordt de TV automatisch uitgeschakeld. Als de TV plotseling wordt uitgeschakeld, druk dan op de toets ü (Stand-by) om te proberen de TV weer in te schakelen. Als de TV nu weer gewoon ingeschakeld kan worden, is er geen sprake van een storing.
WT5EP_NL.book Page 36 Wednesday, December 27, 2000 4:38 PM 7(&+1,6&+(#*(*(9(16 Model AV28WT5EP* Item AV24WT5EP* TV RF-systemen CCIR B/G, I, L Kleursystemen PAL, SECAM • De EXT-aansluitingen ondersteunen ook het NTSC 3.58/4.43 MHz-systeem.
WT5EP_SP.book Page 1 Wednesday, December 27, 2000 4:53 PM Gracias por comprar este televisor en color JVC. Lea atentamente este manual antes de empezar a utilizar el televisor para asegurarse de que lo utiliza correctamente. ADVERTENCIA: NO EXPONGA ESTE APARATO A LA LLUVIA O LA HUMEDAD, YA QUE PODRÍA PROVOCAR UN INCENDIO O SUFRIR UNA DESCARGA ELÉCTRICA. PRECAUCIÓN: CASTELLANO POR SU PROPIA SEGURIDAD, SIGA LAS SIGUIENTES NORMAS DE USO AL UTILIZAR EL APARATO. 1.
WT5EP_SP.book Page 2 Wednesday, December 27, 2000 4:53 PM #3$626#35(9,26 ■ &yPR#FRQHFWDU#OD#DQWHQD#\#HO#YtGHR Si va a conectar un vídeo, siga los pasos A → B → C → D. Si no va a conectar un vídeo, siga los pasos 1 → 2. *1: Para poder utilizar T-V LINK, es necesario conectar un vídeo compatible con T-V LINK al terminal EXT-2 del televisor. Para más información sobre las funciones de T-V LINK, vea “FUNCIONES DE T-V LINK” en la página 5.
WT5EP_SP.book Page 3 Wednesday, December 27, 2000 4:53 PM PASOS PREVIOS ■ $MXVWH#LQLFLDO La primera vez que se pone en marcha el televisor, se activa el modo de ajuste inicial y aparece el logotipo de JVC. Para proceder al ajuste inicial, siga las instrucciones de pantalla. 1 Pulse el interruptor principal de encendido del televisor. Nota: • Si el indicador rojo no cambia a verde: El televisor está en modo en espera.
WT5EP_SP.book Page 4 Wednesday, December 27, 2000 4:53 PM PASOS PREVIOS 5 Pulse el botón azul para activar la función AUTO PROGRAMACION. En pantalla aparecerá el menú AUTO PROGRAMACION y los canales de televisión se memorizarán automáticamente en los diferentes números de canal (PR). Para cancelar la función AUTO PROGRAMACION: Pulse el botón è. 6 Una vez memorizados los canales en los diferentes números de canal (PR), aparecerá el menú EDICION.
WT5EP_SP.book Page 5 Wednesday, December 27, 2000 4:53 PM )81&,21(6#'(#709#/,1. Si el aparato de vídeo que se conecta al terminal EXT-2 es compatible con T-V LINK, se simplifican las tareas de ajuste y reproducción. T-V LINK utiliza las siguientes funciones: Para utilizar las funciones de T-V LINK: Necesita un vídeo compatible con T-V LINK. Ha de conectar el vídeo al terminal EXT-2 del televisor mediante un euroconector (SCART) de cableado completo.
WT5EP_SP.book Page 6 Wednesday, December 27, 2000 4:53 PM )81&,21$0,(172#%É6,&2 ■ &yPR#HQFHQGHU#HO#WHOHYLVRU Pulse el botón principal de encendido del televisor. El indicador de encendido se ilumina en rojo si el televisor está en modo de espera. Nota: • Si el televisor está en marcha, el indicador se ilumina en verde. Para apagar el televisor, pulse: Pulse de nuevo el interruptor principal de encendido. Se apaga el indicador de encendido.
WT5EP_SP.book Page 7 Wednesday, December 27, 2000 4:53 PM FUNCIONAMIENTO BÁSICO 2 Pulse los botones ì y ë para seleccionar un número de canal (PR). A continuación, pulse é. ■ &yPR#DMXVWDU#HO#YROXPHQ Pulse los botones ì para ajustar el volumen. En la pantalla aparecerá el indicador de nivel del volumen, que aumentará o disminuirá cuando pulse los botones –/+. ■ &yPR#YHU#LPiJHQHV#GH#XQD# IXHQWH#H[WHUQD Seleccione el terminal EXT al que haya conectado la fuente externa.
WT5EP_SP.book Page 8 Wednesday, December 27, 2000 4:53 PM FUNCIONAMIENTO BÁSICO ■ &yPR#XWLOL]DU#ORV#ERWRQHV#GHO#WHOHYLVRU 1 Pulse los botones P B para encender el televisor cuando esté en modo de espera. 2 Pulse los botones P B para seleccionar un número de canal (PR) o un terminal EXT. 3 Pulse el botón D (Volumen) y, a continuación, los botones C para ajustar el nivel de volumen. 1 Pulse el botón D (Volumen). (Detrás de la tapa frontal) Aparece en pantalla el indicador de nivel del volumen.
WT5EP_SP.book Page 9 Wednesday, December 27, 2000 4:53 PM #%2721(6#<#)81&,21(6#'(/#0$1'2#$#',67$1&,$ 1 %RWyQ#VLOHQFLDGRU Si lo desea, puede interrumpir el sonido instantáneamente. 2 3 4 5 6 7 8 9 0 P TV 2 %RWRQHV#QXPpULFRV Podrá seleccionar un número de canal (PR) introduciendo ese número con los botones numéricos. AV MENU OK P F.T/L CASTELLANO 1 Pulse el botón silenciador ã para desconectar el volumen.
WT5EP_SP.book Page 10 Wednesday, December 27, 2000 4:53 PM BOTONES Y FUNCIONES DEL MANDO A DISTANCIA PANORAMIC: Se alarga la imagen normal (formato 4:3) por los lados hasta llenar toda la pantalla y sin que se pierda naturalidad. Nota: • La imagen se recorta ligeramente por arriba y por abajo. ZOOM 14:9: Amplía la imagen de formato panorámico (formato 14:9) por arriba y por abajo para llenar toda la pantalla. 2 Pulse los botones ë para seleccionar un modo de ZOOM. A continuación, pulse é.
WT5EP_SP.book Page 11 Wednesday, December 27, 2000 4:53 PM BOTONES Y FUNCIONES DEL MANDO A DISTANCIA 5#%RWyQ#GH#LQIRUPDFLyQ 8 %RWyQ#GH#PRGR#HQ#HVSHUD Permite mostrar la LISTA PR o la hora en pantalla. Pulse el botón ü (modo en espera) para encender o apagar el televisor. Pulse el botón å (Información). Pulse el botón å (Información) y la pantalla cambiará en el orden siguiente: Al encender el televisor, el indicador de encendido cambia de rojo a verde. 9 %RWRQHV#GH#FRORU 0 %RWRQ#2.
WT5EP_SP.book Page 12 Wednesday, December 27, 2000 4:53 PM BOTONES Y FUNCIONES DEL MANDO A DISTANCIA ■ #~#%RWRQHV#GH#FRQWURO#GHO#WHOHWH[WR#\#VHOHFWRU#9&5# 9&5#( (#'9' P TV Nota: • Si tiene algún problema para recibir el teletexto, póngase en contacto con su distribuidor local o la cadena que emite el teletexto. • En el teletexto se selecciona automáticamente el modo de ZOOM COMPLETO. • Mientras sintoniza el teletexto en pantalla no podrá utilizar los menús.
WT5EP_SP.book Page 13 Wednesday, December 27, 2000 4:53 PM BOTONES Y FUNCIONES DEL MANDO A DISTANCIA 3iJLQD#VHFXQGDULD 6DOLU Algunas páginas de teletexto arrastran páginas secundarias que aparecen en pantalla automáticamente. Las páginas secundarias se pueden bloquear o visualizar en cualquier momento. Puede buscar una página de teletexto y, al mismo tiempo, ver la televisión.
WT5EP_SP.book Page 14 Wednesday, December 27, 2000 4:53 PM &Ð02#87,/,=$5#(/#0(1Ô Este televisor incorpora varias funciones controlables desde menús. Para sacarle el máximo partido al televisor debe llegar a dominar el funcionamiento de los menús. 1 Pulse el botón é para acceder al menú principal. Aparece en pantalla el menú principal, en el que aparecen los títulos de los diferentes menús. 2 Pulse los botones ë para seleccionar un título del menú y, a continuación, pulse é. Se abre el menú.
WT5EP_SP.book Page 15 Wednesday, December 27, 2000 4:53 PM $-867(#'(#,0$*(1 Nota: • Sólo puede ajustar la tonalidad de la imagen (MATIZ NTSC) cuando el sistema de color empleado es el NTSC 3.58 o NTSC 4.43. Para volver a los ajustes predeterminados en los diferentes modos de MATIZ: 1 Pulse el botón é para acceder a MENU (menú principal). 2 Pulse los botones ë para seleccionar AJUSTE DE IMAGEN y, a continuación, pulse é. Pulse el botón azul.
WT5EP_SP.book Page 16 Wednesday, December 27, 2000 4:53 PM )81&,21(6#'(#,0$*(1 ■ 6,67(0$#'(#&2/25 El televisor selecciona automáticamente un sistema de color, pero si la imagen no sale nítida o fallan los colores, puede cambiar el sistema de color manualmente. 1 Pulse los botones ë para seleccionar Para ver en pantalla el menú FUNCIONES DE IMAGEN: 1 Pulse el botón é para acceder a MENU SISTEMA DE COLOR. A continuación, pulse é. En pantalla aparecerá un menú secundario dentro de SISTEMA DE COLOR.
WT5EP_SP.book Page 17 Wednesday, December 27, 2000 4:53 PM FUNCIONES DE IMAGEN ■ )250$72#$872017=6 Esta función solamente es válida cuando el modo de ZOOM está ajustado en el modo AUTO(WSS). Con ella se establece el modo de ZOOM que usted quiera utilizar cuando la señal de transmisión o la señal procedente de un dispositivo externo no incluya una señal WSS. Usted podrá elegir uno de tres modos de ZOOM.
WT5EP_SP.book Page 18 Wednesday, December 27, 2000 4:53 PM $-867(#'(#621,'2 ■ +,3(5#621,'2 Esta función permite crear un sonido más envolvente. 1 Pulse los botones ë para seleccionar HYPER SONIDO. 2 Pulse los botones ì para seleccionar Para ver en pantalla el menú AJUSTE DE SONIDO: 1 Pulse el botón é para acceder a MENU (menú principal). 2 Pulse los botones ë para seleccionar AJUSTE DEL SONIDO. A continuación, pulse é.
WT5EP_SP.book Page 19 Wednesday, December 27, 2000 4:53 PM $-867(#(;71 3 Pulse el botón é para confirmar la selección. El menú desaparece. 1 Pulse el botón é para acceder a MENU (menú principal). 2 Pulse el botón ë para seleccionar AJUSTE EXT. y, a continuación, pulse el botón é. ■ #K+HQWUDGD#609,'(2, Conectando un equipo (por ejemplo, un vídeo S-VHS) de señal S-VIDEO (señal Y/C), podrá disfrutar de este sistema con imágenes de excelente calidad.
WT5EP_SP.book Page 20 Wednesday, December 27, 2000 4:53 PM AJUSTE EXT. 3 Pulse los botones ë para seleccionar un nombre. A continuación, pulse é. La LISTA desaparece y el nombre queda asignado al terminal EXT. Para borrar el nombre asignado al terminal EXT: Seleccione un espacio en blanco. 4 Pulse el botón é para confirmar la selección. El menú desaparece. Nota: • Es imposible dar un nombre de terminal EXT que no aparezca en la lista de nombres (LISTA).
WT5EP_SP.book Page 21 Wednesday, December 27, 2000 4:53 PM 275$6#)81&,21(6 ■ )21'2#$=8/ Esta función permite al televisor cambiar automáticamente a una pantalla de fondo azul e interrumpir el sonido cuando la señal recibida es demasiado débil o inexistente, o cuando no se recibe señal de un aparato externo. 1 Pulse los botones ë para seleccionar Para ver en pantalla el menú OTRAS FUNCIONES: (menú principal). 2 Pulse el botón ë para seleccionar OTRAS FUNCIONES. A continuación, pulse é.
WT5EP_SP.book Page 22 Wednesday, December 27, 2000 4:53 PM OTRAS FUNCIONES 5 Pulse el botón azul y ajuste PROTECCION INFANTIL. En pantalla aparece el símbolo FANTIL) y se bloquea el canal. @ (PROTECCION IN- Para cancelar la función PROTECCION INFANTIL: Vuelva a pulsar el botón azul. Desaparece el símbolo @ (PROTECCION INFANTIL). 6 Pulse el botón é para confirmar la selección. El menú desaparece.
WT5EP_SP.book Page 23 Wednesday, December 27, 2000 4:53 PM ,167$/$&,21 3 Pulse el botón azul para activar la función AUTO PROGRAMACION. En pantalla aparecerá el menú AUTO PROGRAMACION y los canales de televisión se memorizarán automáticamente en los diferentes números de canal (PR). CASTELLANO Para ver en pantalla el menú INSTALACION: 1 Pulse el botón é para acceder a MENU (menú principal). 2 Pulse el botón ë para seleccionar el menú INSTALACION. A continuación, pulse é.
WT5EP_SP.book Page 24 Wednesday, December 27, 2000 4:53 PM INSTALACION ■ (',&,2120$18$/ 2 Siga los pasos necesarios para activar la La función EDICION/MANUAL se divide en dos tipos: edición de los números de canal (PR) existentes (EDICION) y memorización manual de canales en números de canal (PR) (MANUAL). Estas funciones se subdividen a su vez en otras funciones: 3 Pulse el botón é para confirmar la selec- función y selecciónela. ción. Aparece el menú de T-V LINK.
WT5EP_SP.book Page 25 Wednesday, December 27, 2000 4:53 PM INSTALACION ,' 1 Pulse los botones ë para seleccionar un canal de televisión. Cada vez que pulse ë retrocederá o avanzará un número de canal y sintonizará en pantalla el canal memorizado en ese número de canal. 2 Pulse el botón rojo para activar la función 3 Pulse los botones ë hasta encontrar el primer caracter del nombre del canal (ID).
WT5EP_SP.book Page 26 Wednesday, December 27, 2000 4:53 PM INSTALACION %255$5 1 Pulse los botones ë para seleccionar un canal de televisión. Cada vez que pulse ë retrocederá o avanzará un número de canal (PR) y sintonizará en pantalla el canal memorizado en ese número de canal. 2 Pulse el botón amarillo para borrar el canal de televisión. El canal desaparece de la lista de números de canal (PR).
WT5EP_SP.book Page 27 Wednesday, December 27, 2000 4:53 PM '(02675$&,21 1 Pulse el botón é para acceder a MENU (menú principal). 2 Pulse el botón ë para seleccionar el menú DEMOSTRACION. A continuación, pulse é . CASTELLANO Para ver en pantalla el menú DEMOSTRACION: La función DEMOSTRACION muestra automáticamente cómo se utilizan algunas funciones del televisor. 1 Pulse los botones ë para seleccionar ON. 2 Pulse el botón é para confirmar la selección.
WT5EP_SP.book Page 28 Wednesday, December 27, 2000 4:53 PM 275$6#)81&,21(6#'(/#0(1Ô ■ &yPR#DFWXDOL]DU#OD#LQIRUPD0 FLyQ#HQ#HO#YtGHR La función T-V LINK le permite enviar al aparato de vídeo la información registrada más recientemente en los números de canal (PR). 2 Pulse los botones ë para seleccionar AUTO PROGRAMACION. A continuación, pulse é . En pantalla aparecerá el menú PAIS como menú secundario de la función AUTO PROGRAMACION.
WT5EP_SP.book Page 29 Wednesday, December 27, 2000 4:53 PM OTRAS FUNCIONES DEL MENÚ 6 Pulse el botón é para confirmar la selección. Aparece el menú de T-V LINK. actualizar la información en el vídeo” en la página 28 para enviar la información memorizada en los números de canal (PR) al aparato de vídeo. CASTELLANO 7 Siga el procedimiento explicado en “Cómo 8 Para descodificar otros canales de televisión descodificables, repita los pasos 2 a 7.
WT5EP_SP.book Page 30 Wednesday, December 27, 2000 4:53 PM 27526#3$626#35(9,26 ■ &yPR#FRQHFWDU#HTXLSRV#H[WHUQRV Cuando conecte equipos externos al televisor, preste especial atención a las conexiones de los paneles frontal y posterior. Antes de realizar cualquier conexión: • Lea los manuales de instrucciones suministrados con cada equipo. Es posible que con algún equipo el método de conexión sea diferente al de la ilustración.
WT5EP_SP.book Page 31 Wednesday, December 27, 2000 4:53 PM OTROS PASOS PREVIOS (TXLSRV#TXH#SXHGHQ#HQYLDU#OD#VHxDO 609,'(2#+VHxDO#<2&,#FRPR#XQ#YtGHR 609+6 9tGHR#FRPSDWLEOH#FRQ#709#/,1. Asegúrese de conectar un vídeo compatible con T-V LINK al terminal EXT-2. En caso contrario, la función T-V LINK podría darle errores. CASTELLANO Conecte el equipo a un terminal EXT, excepto al terminal EXT-1.
WT5EP_SP.book Page 32 Wednesday, December 27, 2000 4:53 PM 1Ô0(52#&+2&& Para utilizar la función INSERTAR descrita en la página página 25, busque el número CH/CC que corresponda al número de canal del televisor de esta tabla.
WT5EP_SP.
WT5EP_SP.book Page 34 Wednesday, December 27, 2000 4:53 PM 62/8&,Ð1#'(#352%/(0$6 Si se le presenta algún problema al utilizar el televisor, lea este apartado antes de llevar a reparar el aparato. Es posible que pueda arreglarlo usted mismo. A veces, por ejemplo, el televisor está desenchufado de la toma de corriente o la antena está dañada y uno cree que el televisor no funciona.
WT5EP_SP.book Page 35 Wednesday, December 27, 2000 4:53 PM SOLUCIÓN DE PROBLEMAS 2WUDV#FXHVWLRQHV#TXH#VH#GHEHQ#WHQHU HQ#FXHQWD • Si el TEMPORIZADOR está activado, el televisor se apaga automáticamente. Si lo hace, pulse el botón ü (modo en espera) para volverlo a encender. Si el televisor se enciende y empieza a funcionar con normalidad, no hay riesgo de avería.
WT5EP_SP.book Page 36 Wednesday, December 27, 2000 4:53 PM &$5$&7(5Ì67,&$6#7e&1,&$6 Modelo Parámetro de ajuste AV28WT5EP* AV24WT5EP* Sistemas de transmisión CCIR B/G, I, L Sistemas de color PAL, SECAM • Los terminales EXT también son compatibles con el sistema NTSC 3.58/4.43 MHz. Canales y frecuencias • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, A-H, H+1, H+2, F2-F10, F21-F69 • Canal de televisión por cable francés a frecuencias 116 - 172 MHz y 220 - 469 MHz.
WT5EP_IT.book Page 1 Wednesday, December 27, 2000 4:40 PM Ringraziamo la gentile clientela per l’acquisto di u’n televisore a colori JVC. Per comprendere a fondo le funzionalità del televisore acquistato, si invita a leggere attentamente il presente manuale prima dell’uso. AVVERTENZA: PER EVITARE RISCHI DI INCENDIO O SCOSSA ELETTRICA, NON ESPORRE L’APPARECCHIATURA A LIQUIDI O UMIDITÀ. ATTENZIONE: 1. Utilizzare esclusivamente la corrente di alimentazione specificata sull’unità (CA 220 – 240 V, 50 Hz). 2.
WT5EP_IT.book Page 2 Wednesday, December 27, 2000 4:40 PM 35(3$5$=,21( ■ &ROOHJDPHQWR#GHOO·DQWHQQD#H#GHO#YLGHRUHJLVWUDWRUH Se si collega un videoregistratore, seguire la procedura A → B → C → D. Se non si collega un videoregistratore, seguire la procedura 1 → 2. *1:Perché le funzioni T-V LINK siano operative, è necessario collegare un videoregistratore compatibile T-V LINK al terminale EXT-2 del televisore. Per ulteriori informazioni sulle funzioni T-V LINK, vedere “FUNZIONI T-V LINK” a pagina 5.
WT5EP_IT.book Page 3 Wednesday, December 27, 2000 4:40 PM PREPARAZIONE ■ ,PSRVWD]LRQL#LQL]LDOL Quando il televisore viene acceso per la prima volta, verrà attivata la modalità di impostazione iniziale e verrà visualizzato il logo della JVC. Seguire le istruzioni su schermo per effettuare le impostazioni iniziali. 1 ITALIANO Premere il tasto di alimentazione principale sul televisore.
WT5EP_IT.book Page 4 Wednesday, December 27, 2000 4:40 PM PREPARAZIONE 5 Premere il tasto blu per avviare la funzione SINTONIA AUTOMATICA. Il menu SINTONIA AUTOMATICA viene visualizzato e i canali TV ricevuti vengono automaticamente registrati nei numeri Programma (PR). Per annullare la funzione SINTONIA AUTOMATICA: Premere il tasto è. 6 Una volta che i canali TV sono stati registrati nei numeri Programma (PR), verrà visualizzato il menu MODIFICA PROGR..
WT5EP_IT.book Page 5 Wednesday, December 27, 2000 4:40 PM )81=,21,#709#/,1. Quando un videoregistratore compatibile T-V LINK è collegato al terminale EXT-2 del televisore, le procedure di impostazione del videoregistratore e di visione delle videocassette risulteranno più semplici. T-V LINK presenta le seguenti caratteristiche: Per utilizzare le funzioni T-V LINK: È necessario che il videoregistratore sia compatibile T-V LINK.
WT5EP_IT.book Page 6 Wednesday, December 27, 2000 4:40 PM )81=,21$0(172#*(1(5$/( ■ 3UHPHUH#LO#WDVWR#GL#DOLPHQWD]LRQH1 Premere il tasto di alimentazione principale sul televisore. La spia di alimentazione si illuminerà di colore rosso e il televisore entrerà nella modalità di riposo (standby mode). Nota: • Se la spia di alimentazione si illumina di colore verde, il televisore è acceso. Per togliere l’alimentazione al televisore: Premere nuovamente il tasto di alimentazione principale sul televisore.
WT5EP_IT.book Page 7 Wednesday, December 27, 2000 4:40 PM FUNZIONAMENTO GENERALE 2 Premere i tasti ì e ë per scegliere il numero Programma (PR). Quindi, premere il tasto é. ■ 5HJRODUH#LO#YROXPH Premere i tasti ì per regolare il volume. Utilizzare LISTA PROGR.: 1 Premere il tasto å (Informazioni) per visualizzare LISTA PROGR.. 2 Premere i tasti ì e ë per scegliere un terminale EXT. Quindi, premere il tasto é. Nota: • I terminali EXT sono registrati dopo il numero Programma PR 99.
WT5EP_IT.book Page 8 Wednesday, December 27, 2000 4:40 PM FUNZIONAMENTO GENERALE ■ )XQ]LRQDPHQWR#FRQ#L#WDVWL#VXO#WHOHYLVRUH 1 Premere i tasti P B per accendere la televisione dalla modalità di riposo. 2 Premere i tasti P B per scegliere un numero Programma (PR) o un terminale EXT. 3 Premere il tasto D (Volume) e i tasti C per regolare il volume. 1 Premere il tasto D (Volume). Verrà visualizzato l’indicatore del livello di volume.
WT5EP_IT.book Page 9 Wednesday, December 27, 2000 4:40 PM #7$67,#(#)81=,21,#'(/#7(/(&20$1'2 1 7DVWR#GL#VLOHQ]LDPHQWR Consente di togliere l’audio istantaneamente. 2 3 4 5 6 7 8 9 0 P TV AV MENU 2 7DVWL#QXPHULFL È possibile scegliere un numero Programma (PR) immettendo un numero Programma. ITALIANO 1 Premere il tasto ã (Silenziamento) per togliere il volume. Se si preme nuovamente il tasto ã (Silenziamento), verrà ripristinato il livello di volume precedente.
WT5EP_IT.book Page 10 Wednesday, December 27, 2000 4:40 PM TASTI E FUNZIONI DEL TELECOMANDO PANORAMIC: Questa modalità estende in modo uniforme i lati sinistro e destro di un’immagine normale (rapporto 4:3) in modo da riempire lo schermo senza che l’immagine sembri non naturale. Nota: • Le parti superiore e inferiore dell’immagine verranno leggermente tagliate. ZOOM 14:9: Questa modalità ingrandisce l’immagine ampia (rapporto 14:9) ai bordi superiore e inferiore dello schermo.
WT5EP_IT.book Page 11 Wednesday, December 27, 2000 4:40 PM TASTI E FUNZIONI DEL TELECOMANDO 5#7DVWR#,QIRUPD]LRQL 8 7DVWR#5LSRVR#+6WDQGE\, Consente di visualizzare LISTA PROGR. o l’ora corrente sullo schermo. Premere il tasto ü (Riposo) per accendere o spegnere il televisore. Premere il tasto å (Informazioni). Premendo il tasto å (Informazioni) la visualizzazione su schermo cambierà nel modo seguente: Quando il televisore viene acceso, la spia di alimentazione passa da rossa a verde.
WT5EP_IT.book Page 12 Wednesday, December 27, 2000 4:40 PM TASTI E FUNZIONI DEL TELECOMANDO 7DVWL#GL#FRPDQGR#GHO#WHOHYLGHR#H#LQWHUUXWWRUH#9&5#( ■ #~#7DVWL#GL#FRPDQGR#GHO#WHOHYLGHR#H#LQWHUUXWWRUH#9&5# (#'9' P TV Nota: • Se si riscontrano dei problemi con la ricezione del televideo, contattare il rivenditore locale o il canale del televideo. • In modalità Televideo, la modalità ZOOM rimarrà fissa su SCHERMO PIENO. • Non è possibile utilizzare i menu durante la visualizzazione di un programma televideo.
WT5EP_IT.book Page 13 Wednesday, December 27, 2000 4:40 PM TASTI E FUNZIONI DEL TELECOMANDO 3DJLQD#VHFRQGDULD $QQXOOD Alcune pagine del televideo includono ulteriori pagine che vengono visualizzate automaticamente. È possibile bloccare qualsiasi pagina secondaria o visualizzarla in qualsiasi momento. È possibile cercare una pagina del televideo mentre si guarda l’immagine del canale TV. 1 Premere il tasto î (Pagina secondaria) un numero di pagina oppure premere un tasto colorato.
WT5EP_IT.book Page 14 Wednesday, December 27, 2000 4:40 PM )81=,21$0(172#'(,#0(18 Questo televisore dispone di una gamma di funzioni attivabile tramite dei menu. Per utilizzare in modo completo tutte le funzioni del televisore, è necessario conoscere approfonditamente le tecniche di funzionamento generale dei menu. 1 Premere il tasto é per visualizzare MENU (menu principale). Verrà visualizzato MENU (menu principale). In questo menu vengono visualizzati i titoli dei menu selezionabili.
WT5EP_IT.book Page 15 Wednesday, December 27, 2000 4:40 PM ,00$*,1( Nota: • È possibile modificare l’impostazione TINTA (tinta immagine) soltanto quando il sistema del colore è NTSC 3.58 o NTSC 4.43. Per tornare alle impostazioni predefinite in ciascuna modalità TEMP.COLORE: 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere i tasti ë per scegliere IMMAGINE, quindi premere il tasto é. ■ 7(031&2/25( i tasti TEMP.COLORE. 3 Premere il tasto é per completare le impostazioni.
WT5EP_IT.book Page 16 Wednesday, December 27, 2000 4:40 PM 9$5,(2,00$*,1( ■ 6,67(0$ Il sistema del colore viene scelto automaticamente. Tuttavia, se l’immagine non è nitida o non appare il colore, scegliere manualmente il sistema del colore. 1 Premere i tasti ë per scegliere SISTEMA. Quindi, premere il tasto é. Verrà visualizzato il sottomenu della funzione SISTEMA. Per visualizzare il menu VARIE/IMMAGINE: 1 Premere il tasto é per visualizzare MENU (menu principale).
WT5EP_IT.book Page 17 Wednesday, December 27, 2000 4:40 PM VARIE/IMMAGINE ■ 7=6#$87201 Questa funzione agisce solo quando la modalità ZOOM è impostata sulla modalità AUTO (WSS). Imposta la modalità ZOOM da usare quando un segnale WSS non è incluso nel segnale di trasmissione o nel segnale da un dispositivo esterno. Si può scegliere fra tre modalità ZOOM. 1 Premere i tasti ë per scegliere 4:3 AUTOM.. Quindi, premere il tasto é.
WT5EP_IT.book Page 18 Wednesday, December 27, 2000 4:40 PM 68212 ■ +<3(5#6281' Consente di ascoltare i suoni con un’atmosfera più ampia. 1 Premere i tasti ë per scegliere HYPER SOUND. 2 Premere i tasti ì per scegliere SI. Per visualizzare il menu SUONO: 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere il tasto ë per scegliere SUONO. Quindi, premere il tasto é.
WT5EP_IT.book Page 19 Wednesday, December 27, 2000 4:40 PM 35(6(/(=,21(#(;7 3 Premere il tasto é per completare l’impostazione. Il menu scomparirà dallo schermo. 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere il tasto ë per scegliere PRESELEZIONE EXT. Quindi, premere il tasto é.
WT5EP_IT.book Page 20 Wednesday, December 27, 2000 4:40 PM PRESELEZIONE EXT 3 Premere i tasti ë per scegliere un nome. Quindi, premere il tasto é. La LISTA scompare e il nome viene assegnato al terminale EXT. Per cancellare un nome assegnato al terminale EXT: Scegliere uno spazio vuoto. 4 Premere il tasto é per completare l’impostazione. Il menu scomparirà dallo schermo. Nota: • Non è possibile assegnare un nome di terminale EXT non presente nella lista dei nomi (LISTA).
WT5EP_IT.book Page 21 Wednesday, December 27, 2000 4:40 PM 23=,21, ■ )21'2#%/8 È possibile impostare il televisore per la visualizzazione automatica di un fondo blu e il silenziamento dell’audio quando si riceve un segnale debole o non si riceve alcun segnale, oppure quando non è presente alcun segnale in ingresso da dispositivi esterni. 1 Premere i tasti ë per scegliere FONDO BLU. 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere il tasto ë per scegliere OPZIONI.
WT5EP_IT.book Page 22 Wednesday, December 27, 2000 4:40 PM OPZIONI 5 Premere il tasto blu e impostare la funzione BLOCCO CANALI. Verrà visualizzato @ (BLOCCO CANALI) e il canale TV verrà bloccato. Per azzerare la funzione BLOCCO CANALI: Premere nuovamente il tasto blu. Il simbolo @ (BLOCCO CANALI) scompare. 6 Premere il tasto é per completare l’impostazione. Il menu scomparirà dallo schermo.
WT5EP_IT.book Page 23 Wednesday, December 27, 2000 4:40 PM ,167$//$=,21( 3 Premere il tasto blu per avviare la funzione SINTONIA AUTOMATICA. Il menu SINTONIA AUTOMATICA viene visualizzato e i canali TV ricevuti vengono automaticamente registrati nei numeri Programma (PR). ITALIANO Per visualizzare il menu INSTALLAZIONE: 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere il tasto ë per scegliere il menu INSTALLAZIONE. Quindi, premere il tasto é.
WT5EP_IT.book Page 24 Wednesday, December 27, 2000 4:40 PM INSTALLAZIONE ■ 02',),&$#3520$18$/( 2 Seguire la descrizione operativa della fun- Le funzioni MODIFICA PR/MANUALE sono di due tipi: modifica dei numeri Programma correnti (PR) (funzioni MODIFICA PROGR.) e registrazione manuale di un canale TV da assegnare al numero Programma (PR) (funzione MANUALE).
WT5EP_IT.book Page 25 Wednesday, December 27, 2000 4:40 PM INSTALLAZIONE ,' 1 Premere i tasti ë per scegliere un canale TV. Ogni volta che si premono i tasti ë , il numero Programma (PR) cambia e l’immagine del canale TV registrato nel numero Programma (PR) viene visualizzata sullo schermo. zione ID. 3 Premere i tasti ë per scegliere il primo carattere di un nome di canale (ID) che si desidera assegnare a un canale TV.
WT5EP_IT.book Page 26 Wednesday, December 27, 2000 4:40 PM INSTALLAZIONE (/,0,1$ 1 Premere i tasti ë per scegliere un canale TV. Ogni volta che si premono i tasti ë, il numero Programma (PR) cambia e l’immagine del canale TV registrato nel numero Programma (PR) viene visualizzata sullo schermo. 2 Premere il tasto giallo per eliminare il canale TV. Il canale TV verrà eliminato dalla lista dei numeri Programma (PR).
WT5EP_IT.book Page 27 Wednesday, December 27, 2000 4:40 PM ',02675$=,21( 1 Premere il tasto é per visualizzare MENU (menu principale). 2 Premere il tasto ë per scegliere DIMOS- ITALIANO Per visualizzare il menu DIMOSTRAZIONE: TRAZIONE. Quindi, premere il tasto é . La funzione DIMOSTRAZIONE dimostra automaticamente alcune delle funzioni del televisore. 1 Premere i tasti ë per scegliere SI. 2 Premere il tasto é per completare le impostazioni.
WT5EP_IT.book Page 28 Wednesday, December 27, 2000 4:40 PM 23(5$=,21,#$**,817,9(#&21#,#0(18 ■ #6FDULFDPHQWR#GHL#GDWL#VXO#YL0 GHRUHJLVWUDWRUH È possibile inviare i dati più recenti dei numeri Programma (PR) al videoregistratore tramite la funzione T-V LINK. 2 Premere i tasti ë per scegliere SINTONIA AUTOMATICA. Quindi, premere il tasto é . Il menu NAZIONE viene visualizzato come sottomenu della funzione SINTONIA AUTOMATICA.
WT5EP_IT.book Page 29 Wednesday, December 27, 2000 4:40 PM OPERAZIONI AGGIUNTIVE CON I MENU 6 Premere il tasto é per completare l’impostazione. Verrà visualizzato il menu T-V LINK. “Scaricamento dei dati sul videoregistratore” a pagina 28 per inviare i dati del numero Programma (PR) al videoregistratore. ITALIANO 7 Seguire la procedura di funzionamento 8 Se si dispone di un altro canale TV da decodificare tramite il decoder, ripetere i passaggi da 2 a 7.
WT5EP_IT.book Page 30 Wednesday, December 27, 2000 4:40 PM 35(3$5$=,21,#$**,817,9( ■ &ROOHJDPHQWR#GL#GLVSRVLWLYL#HVWHUQL Collegare i dispositivi al televisore, facendo attenzione ai collegamenti del pannello posteriore e del pannello anteriore. Prima di iniziare i collegamenti: • Leggere i manuali forniti con i dispositivi. A seconda dei dispositivi, il metodo di collegamento potrebbe risultare diverso da quanto riportato in figura.
WT5EP_IT.book Page 31 Wednesday, December 27, 2000 4:40 PM PREPARAZIONI AGGIUNTIVE 'LVSRVLWLYL# FKH# SRVVRQR# LQYLDUH# LQ XVFLWD#LO# VHJQDOH#609,'(2#+VHJQDOH#<2&,/#DG HVHPSLR#XQ#YLGHRUHJLVWUDWRUH#609+6 9LGHRUHJLVWUDWRUH# FRPSDWLELOH# 709 /,1. ITALIANO Collegare il dispositivo a un terminale EXT diverso dal terminale EXT-1. È possibile scegliere un segnale di ingresso video tra il segnale S-VIDEO (segnale Y/C) e il segnale video normale (segnale composito).
WT5EP_IT.book Page 32 Wednesday, December 27, 2000 4:40 PM 7$%(//$#'(,#180(5,##&+2&& Quando si desidera utilizzare la funzione INSER. a pagina 25, individuare il numero CH/CC corrispondente al numero di canale del canale TV nella tabella che segue.
WT5EP_IT.
WT5EP_IT.book Page 34 Wednesday, December 27, 2000 4:40 PM 5,62/8=,21(#'(,#352%/(0, Se si verifica un problema durante l’uso del televisore, leggere attentamente la presente sezione sulla “Risoluzione dei problemi” prima di far riparare il televisore. È possibile che si sia in grado di risolvere agevolmente il problema autonomamente. Ad esempio, se la spina CA è scollegata dalla presa CA, o l’antenna TV presenta dei problemi, si potrebbe erroneamente pensare a un problema del televisore.
WT5EP_IT.book Page 35 Wednesday, December 27, 2000 4:40 PM RISOLUZIONE DEI PROBLEMI $OWUH#FRQVLGHUD]LRQL • Quando la funzione TIMER è attiva, il televisore viene automaticamente spento. Se il televisore si spegne improvvisamente, provare a premere il tasto ü (Riposo) per accendere nuovamente il televisore. Se il televisore viene ripristinato allo stato originale, il problema è stato risolto.
WT5EP_IT.book Page 36 Wednesday, December 27, 2000 4:40 PM #63(&,),&+(#7(&1,&+( Modello AV28WT5EP* Elemento AV24WT5EP* Sistemi di trasmissione CCIR B/G, I, L Sistemi del colore PAL, SECAM • I terminali EXT supportano anche il sistema NTSC 3.58/4.43 MHz.
WT5EP_PT.book Page 1 Wednesday, December 27, 2000 4:37 PM Obrigado por ter comprado este televisor a cores JVC. Para se certificar de que utiliza adequadamente o seu novo televisor, leia atentamente este manual antes de começar. AVISO: PARA EVITAR O PERIGO DE INCÊNDIO OU CHOQUE ELÉCTRICO, NÃO EXPONHA ESTE APARELHO À CHUVA OU HUMIDADE. CUIDADO: 1. Utilize apenas a fonte de alimentação especificada (CA 220 – 240V, 50 Hz) na unidade. 2. Evite danificar a ficha CA e o cabo de alimentação. 3.
WT5EP_PT.book Page 2 Wednesday, December 27, 2000 4:37 PM 35(3$5$d®2 ■ /LJDomR#GD#DQWHQD#H#GR#YLGHRJUDYDGRU Se desejar ligar um videogravador, siga A → B → C → D. Se não desejar ligar um videogravador, siga 1 → 2. *1: Para utilizar as funções do T-V LINK, deverá ser ligado um videogravador compatível com T-V LINK ao terminal EXT-2 no televisor. Para obter pormenores sobre as funções do T-V LINK, consulte “FUNÇÕES T-V LINK” na página 5.
WT5EP_PT.book Page 3 Wednesday, December 27, 2000 4:37 PM PREPARAÇÃO ■ &RQILJXUDo}HV#LQLFLDLV Quando o televisor é ligado pela primeira vez, entra no modo de configuração inicial e é exibido o logotipo da JVC. Siga as instruções que surgem no ecrã para efectuar as configurações iniciais. 1 Prima o botão de activação principal do televisor. PORTUGUÊS A lâmpada indicadora de activação acende-se a vermelho (activação), passando depois a verde (TV ligado) e o logotipo da JVC é exibido.
WT5EP_PT.book Page 4 Wednesday, December 27, 2000 4:37 PM PREPARAÇÃO 5 Prima o botão azua para iniciar a função AUTO PROGRAM (programação automática). Surge o menu AUTO PROGRAM (programação automática) e os canais de TV são registados automaticamente nos números de Programa (PR). Para cancelar a função AUTO PROGRAM (programação automática): Prima o botão è. 6 Depois dos canais de TV terem sido registados nos números de Programa (PR), surge o menu EDIT (edição).
WT5EP_PT.book Page 5 Wednesday, December 27, 2000 4:37 PM )81d¯(6#709#/,1.# Quando é ligado um videogravador compatível com T-V LINK ao Terminal EXT-2 no televisor, torna-se mais fácil configurar o videogravador e reproduzir cassetes de vídeo. O T-V LINK utiliza as seguintes características: Para utilizar as funções do T-V LINK: É necessário um videogravador compatível com T-V LINK. O videogravador deve ser ligado ao terminal EXT-2 no televisor através de um cabo SCART totalmente ligado.
WT5EP_PT.book Page 6 Wednesday, December 27, 2000 4:37 PM 23(5$d¯(6#%É6,&$6 ■ /LJDU#R#ERWmR#GH#DFWLYDomR#SULQFLSDO Prima o botão de activação principal do televisor. A lâmpada indicadora de activação acende-se a vermelho e o televisor está no modo de espera. Nota: • Se a lâmpada indicadora de activação se acender a verde, o televisor já está ligado. Para desligar o botão de activação principal: Prima novamente o botão de activação principal. A lâmpada indicadora de activação desliga-se.
WT5EP_PT.book Page 7 Wednesday, December 27, 2000 4:37 PM OPERAÇÕES BÁSICAS 2 Prima os botões ì e ë para seleccionar um número de Programa (PR). De seguida, prima o botão é. ■ $MXVWH#GR#YROXPH Surge o indicador de volume e o volume é alterado à medida que prime os botões –/+. ■ 2EVHUYDomR#GH#LPDJHQV#GH# GLVSRVLWLYRV#H[WHUQRV Seleccione o terminal EXT ao qual foi ligado o dispositivo externo desejado. Utilize o botão â: Prima o botão â para seleccionar um terminal EXT.
WT5EP_PT.book Page 8 Wednesday, December 27, 2000 4:37 PM OPERAÇÕES BÁSICAS ■ 8WLOL]DomR#GRV#ERW}HV#QR#WHOHYLVRU 1 Prima os botões P B para ligar o televisor a partir do modo de espera. 2 Prima os botões P B para seleccionar um número de Programa (PR) ou um terminal EXT. 3 Prima o botão D (Volume) e os botões C para ajustar o volume. 1 Prima o botão D (Volume). Surge o indicador de volume. 2 Prima os botões C enquanto é exibido o indicador de volume.
WT5EP_PT.book Page 9 Wednesday, December 27, 2000 4:37 PM #%27¯(6#(#)81d¯(6#'2#&21752/2#5(0272 1 %RWmR#GH#VLOrQFLR É possível desligar o volume imediatamente. Prima o botão ã (Silêncio) para tirar o som. Ao premir novamente o botão ã (Silêncio) retoma o nível de volume anterior. 2 3 4 5 6 7 8 9 0 P TV 2 %RW}HV#GH#Q~PHUR Pode seleccionar um número de Programa (PR) premindo o número do Programa. Exemplo: • PR12 → prima ú e ù. • PR6 → prima õ.
WT5EP_PT.book Page 10 Wednesday, December 27, 2000 4:37 PM BOTÕES E FUNÇÕES DO CONTROLO REMOTO PANORAMIC (panorâmica): Este modo estica os lados direito e esquerdo de uma imagem normal (alongamento 4:3) de forma a preencher o ecrã, sem fazer a imagem parecer pouco natural. 2 Prima os botões ë para seleccionar um modo de ZOOM. De seguida, prima o botão é. A imagem é ampliada e o modo de ZOOM seleccionado é exibido após cerca de 5 segundos.
WT5EP_PT.book Page 11 Wednesday, December 27, 2000 4:37 PM BOTÕES E FUNÇÕES DO CONTROLO REMOTO 5#%RWmR#GH#LQIRUPDomR# 8 %RWmR#GH#HVSHUD Pode exibir a PR LIST (lista PR) ou a hora actual no ecrã. Prima o botão ü (em espera) para ligar ou desligar o televisor. Prima o botão å (Informação). Ao premir o botão seguinte forma: å (Informação) muda a exibição da Quando o televisor é ligado, a lâmpada de activação muda de vermelho para verde.
WT5EP_PT.book Page 12 Wednesday, December 27, 2000 4:37 PM BOTÕES E FUNÇÕES DO CONTROLO REMOTO ■ #~#%RW}HV#GH#FRQWUROR#GR#WHOHWH[WR#H#&RPXWDGRU#9&5#( %RW}HV#GH#FRQWUROR#GR#WHOHWH[WR#H#&RPXWDGRU#9&5#(#'9' P TV Nota: • Se tiver dificuldades na recepção de emissões de teletexto, consulte o seu representante local ou a estação que transmite o teletexto. • No modo de Texto, o modo ZOOM é fixo no modo FULL (total).
WT5EP_PT.book Page 13 Wednesday, December 27, 2000 4:37 PM BOTÕES E FUNÇÕES DO CONTROLO REMOTO 6XE0SiJLQD &DQFHODU Algumas páginas do teletexto incluem sub-páginas que são automaticamente exibidas. Pode reter qualquer sub-página ou vizualizá-la em qualquer altura. É possível procurar uma página do teletexto enquanto vê televisão. 1 Prima o botão î (Sub-página) para trabalhar com a função de sub-página. troduzir o número de uma sub-página. Exemplo: • 3ª sub-página → prima û, û, û e ø.
WT5EP_PT.book Page 14 Wednesday, December 27, 2000 4:37 PM 87,/,=$d®2#'2#0(18 Este televisor possui várias funções que pode utilizar através dos menus. Para utilizar todas as funções do seu televisor na totalidade, tem de compreender bem as técnicas básicas de utilização dos menus. 1 Prima o botão é para exibir o MENU (menu principal). Aparece o MENU (menu principal). Neste menu, são exibidos os títulos dos menus. 2 Prima os botões ë para seleccionar um menu, e prima o botão é. O menu aparece.
WT5EP_PT.book Page 15 Wednesday, December 27, 2000 4:37 PM 3,&785(#6(77,1*#+'(),1,d®2#'$#,0$*(0, Nota: • Apenas poderá alterar a opção HUE (tonalidade da imagem) quando o sistema de cores for NTSC 3.58 ou NTSC 4.43. Para voltar às definições predefinidas em cada modo TINT (cor): 1 Prima o botão é para exibir o MENU (menu principal). 2 Prima o botão ë para seleccionar PICTURE SETTING (definição da imagem), e prima o botão é.
WT5EP_PT.book Page 16 Wednesday, December 27, 2000 4:37 PM 3,&785(# )($785(6# +&$5$&7(5Ì67,&$6 '$#,0$*(0, ■ &2/285#6<67(0#+VLVWHPD#GH# FRU, O sistema de cor é escolhido automaticamente. Contudo, caso a imagem não seja nítida ou a cor não apareça, seleccione manualmente o sistema de cor. 1 Prima os botões ë para seleccionar COPara exibir o menu PICTURE FEATURES (características da imagem): 1 Prima o botão é para exibir o MENU LOUR SYSTEM (sistema de cor). De seguida, prima o botão é.
WT5EP_PT.book Page 17 Wednesday, December 27, 2000 4:37 PM PICTURE FEATURES (CARACTERÍSTICAS DA IMAGEM) ■ 7=6#$872#$63(&7 Esta função actua somente quando o modo de ZOOM estiver definido para o modo AUTO (WSS), e define o modo de ZOOM que deseja utilizar quando um sinal WSS não estiver incluído no sinal de transmissão ou no sinal de um dispositivo externo. É possível seleccionar um dos três modos de ZOOM. 1 Prima os botões ë para seleccionar 4:3 AUTO ASPECT. De seguida, prima o botão é.
WT5EP_PT.book Page 18 Wednesday, December 27, 2000 4:37 PM 6281'#6(77,1*#+'(),1,d®2#'2#620, ■ +<3(5#6281'#+KLSHU#VRP, Pode agora usufruir de um som de maior alcance. 1 Prima os botões ë para seleccionar HYPER SOUND (hiper som). 2 Prima os botões ì para seleccionar ON (activado). Para exibir o menu SOUND SETTING (definição do som): 1 Prima o botão é para exibir o MENU (menu principal). 2 Prima o botão ë para seleccionar SOUND SETTING (definição do som). De seguida, prima o botão é.
WT5EP_PT.book Page 19 Wednesday, December 27, 2000 4:37 PM (;7#6(77,1*#+&21),*85$d®2#(;7, 3 Prima o botão é para concluir a configuração. O menu desaparece. 1 Prima o botão é para exibir o MENU (menu principal). 2 Prima o botão ë para seleccionar EXT SETTING (configuração EXT). De seguida, prima o botão é.
WT5EP_PT.book Page 20 Wednesday, December 27, 2000 4:37 PM EXT SETTING (CONFIGURAÇÃO EXT) 3 Prima os botões ë para seleccionar um nome. De seguida, prima o botão é. LIST (lista) desaparece e o nome é atribuído ao terminal EXT. Para apagar um nome atribuído ao terminal EXT: Escolha um espaço em branco. 4 Prima o botão é para concluir a definição. O menu desaparece. Nota: • Não pode atribuir um nome de terminal EXT que não se encontre na lista de nomes (LIST (lista)).
WT5EP_PT.book Page 21 Wednesday, December 27, 2000 4:37 PM )($785(6#+&$5$&7(5Ì67,&$6, ■ %/8(#%$&.#+IXQGR#D]XO, É possível configurar o televisor para mudar automaticamente para um ecrã azul e cortar o som se o sinal for fraco ou nulo, ou quando não existe nenhuma entrada de um aparelho externo. 1 Prima os botões ë para seleccionar BLUE BACK (fundo azul). 2 Prima os botões ì para seleccionar ON 1 Prima o botão é para exibir o MENU (menu principal).
WT5EP_PT.book Page 22 Wednesday, December 27, 2000 4:37 PM FEATURES (CARACTERÍSTICAS) 5 Prima o botão azul e active a função CHILD LOCK (interdição de acesso a programas). Aparece @ (CHILD LOCK (interdição de acesso a programas)) e o canal de TV fica bloqueado. Para reiniciar a função CHILD LOCK (interdição de acesso a programas): Prima novamente o botão azul. @ (CHILD LOCK (interdição de acesso a programas)) desaparece. 6 Prima o botão é para concluir a definição. O menu desaparece.
WT5EP_PT.book Page 23 Wednesday, December 27, 2000 4:37 PM ,167$//#+,167$/$d®2, 3 Prima o botão azul para iniciar a função AUTO PROGRAM (programação automática). O menu AUTO PROGRAM (programação automática) aparece e os canais de TV recebidos são automaticamente registados nos números de Programa (PR). 1 Prima o botão é para exibir MENU (menu principal). 2 Prima o botão ë para seleccionar o menu INSTALL (instalação). De seguida, prima o botão é.
WT5EP_PT.book Page 24 Wednesday, December 27, 2000 4:37 PM INSTALL (INSTALAÇÃO) ■ (',720$18$/#+(GLomR20DQXDO, 2 Siga a descrição da utilização de uma As funções EDIT/MANUAL (Edição/Manual) estão divididas em dois tipos: edição dos números de Programa actuais (PR) (funções EDIT (edição)) e registo manual de um canal de TV que deseja ver no número de Programa (PR) (função MANUAL).
WT5EP_PT.book Page 25 Wednesday, December 27, 2000 4:37 PM INSTALL (INSTALAÇÃO) ,' 1 Prima os botões ë para seleccionar um canal de TV. Sempre que prime os botões ë , o número de Programa (PR) é alterado, e a imagem do canal de TV registada no número de Programa (PR) aparece no ecrã. Nota: • Pode registar o seu nome de Canal (ID) único no canal de TV.
WT5EP_PT.book Page 26 Wednesday, December 27, 2000 4:37 PM INSTALL (INSTALAÇÃO) '(/(7(#+DSDJDU, 1 Prima os botões ë para seleccionar um canal TV. Sempre que prime os botões ë, o número de Programa (PR) é alterado, e a imagem do canal de TV registada no número de Programa (PR) aparece no ecrã. 2 Prima o botão amarelo para apagar o canal de TV. O canal de TV é apagado da lista de números de Programa (PR).
WT5EP_PT.book Page 27 Wednesday, December 27, 2000 4:37 PM '(02 1 Prima o botão é para exibir MENU (menu principal). 2 Prima o botão ë para seleccionar DEMO. De seguida, prima o botão é . PORTUGUÊS Para exibir o menu DEMO: A função DEMO demonstra automaticamente algumas das funções do televisor. 1 Prima os botões ë para seleccionar ON (activado). 2 Prima o botão é para concluir as definições. A função DEMO é definida para ON (activado), e a demonstração iniciar-se-á.
WT5EP_PT.book Page 28 Wednesday, December 27, 2000 4:37 PM 87,/,=$d¯(6#$',&,21$,6#'2#0(18 ■ 7UDQVIHUrQFLD#GRV#GDGRV# SDUD#R#YLGHRJUDYDGRU Pode transmitir os dados dos números de Programa (PR) mais recentes para o videogravador com a função T-V LINK. Cuidado: 2 Prima os botões ë para seleccionar AUTO PROGRAM (programação automática). De seguida, prima o botão é . Aparece um menu COUNTRY (país) como um submenu da função AUTO PROGRAM (programação automática).
WT5EP_PT.book Page 29 Wednesday, December 27, 2000 4:37 PM UTILIZAÇÕES ADICIONAIS DO MENU 6 Prima o botão é para concluir a definição. Aparece o menu T-V LINK. dos dados para o videogravador” na página 28 para transmitir os dados do número de Programa (PR) para o videogravador. PORTUGUÊS 7 Siga o procedimento para “Transferência 8 Se tiver outro canal de TV com possibilidade de ser descodificado com um descodificador, repita os passos 2 a 7.
WT5EP_PT.book Page 30 Wednesday, December 27, 2000 4:37 PM 35(3$5$d®2#$',&,21$/ ■ /LJDomR#GH#DSDUHOKRV#H[WHUQRV Ligue os aparelhos ao televisor, prestando atenção às ligações do painel traseiro e às ligações do painel da frente. Antes de ligar qualquer aparelho: • Leia os manuais fornecidos com os aparelhos. Dependendo dos aparelhos, o método de ligação pode diferir da figura.
WT5EP_PT.book Page 31 Wednesday, December 27, 2000 4:37 PM PREPARAÇÃO ADICIONAL $SDUHOKRV#TXH#SRGHP#SURGX]LU#R# VLQDO#609,'(2#+VLQDO#<2&,#WDO#FRPR GH#XP#YLGHRJUDYDGRU#609+6 9LGHRJUDYDGRU#FRPSDWtYHO#FRP#709 /,1. Certifique-se de que liga o videogravador compatível com TV LINK ao terminal EXT-2. Caso contrário, a função T-V LINK não funcionará devidamente. PORTUGUÊS Ligue o aparelho a um terminal EXT excepto ao terminal EXT-1.
WT5EP_PT.book Page 32 Wednesday, December 27, 2000 4:37 PM 1Ô0(52#&+2&& Quando deseja utilizar a função INSERT (inserir) na página 25, descubra o número CH/CC que corresponde ao número do canal de TV a partir desta tabela.
WT5EP_PT.
WT5EP_PT.book Page 34 Wednesday, December 27, 2000 4:37 PM '(7(&d®2#(#5(62/8d®2#'(#352%/(0$6 Se surgir um problema enquanto estiver a utilizar o televisor, queira ler com atenção esta secção de “Detecção e Resolução de Problemas” antes de solicitar a reparação do televisor. Poderá conseguir resolver o problema facilmente por si próprio. Por exemplo, se a ficha CA estiver desligada da tomada CA, ou se a antena apresentar problemas, poderá pensar que existe um problema no próprio televisor.
WT5EP_PT.book Page 35 Wednesday, December 27, 2000 4:37 PM DETECÇÃO E RESOLUÇÃO DE PROBLEMAS 2XWUDV#SUHRFXSDo}HV • Quando a função SLEEP TIMER (temporizador "sleep") funcionar, o televisor é desligado automaticamente. Se o televisor se desligar repentinamente, tente premir o botão ü (em espera) para voltar a ligar o televisor. Nesta altura, se o televisor retomar um estado normal, não existe nenhum problema.
WT5EP_PT.book Page 36 Wednesday, December 27, 2000 4:37 PM #(63(&,),&$d¯(6 Modelo AV28WTE5EP* Característica AV24WT5EP* Sistemas de emissão CCIR B/G, I, L Sistemas de cor PAL, SECAM • Os terminais EXT também suportam o sistema NTSC 3.58/4.43 MHz.
LCT0897_COVER.