MICRO COMPONENT SYSTEM UX-G66 Consists of AX-UXG66, XT-UXG66, TD-UXG66, and SP-UXG66. STEREO AMPLIFIER AX-UXG66 COMPACT DISC/TUNER XT-UXG66 CASSETTE DECK TD-UXG66 SPEAKER SYSTEM SP-UXG66 OPEN/CLOSE STANDBY/ON M I C R O C O M P O N E N T S Y S T E M U X - G 6 6 AUX FM/AM MULTI JOG MOS - FET VOLUME REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE DIMMER 1 B I T ACTIVE BASS EX.
Warnings, Cautions and Others Avisos, precauciones y otras notas Advertências, precauções e outras notas Caution –– switch! Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off). The switch in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights red. • When the unit is turned on, the STANDBY/ON lamp lights green. The STANDBY/ON lamp Lámpara STANDBY/ON indicador luminoso STANDBY/ON The power can be remote controlled.
CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. PRECAUCIÓN Para reducir riesgos de choques eléctricos, incendio, etc.: 1. No extraiga los tornillos, los cubiertas ni la caja. 2. No exponga este aparato a la lluvia o a la humedad. PRECAUÇÃO Para reduzir riscox de choques eléctricos, incêndio, etc.: 1. Não remova parafusos e tampas ou desmonte a caixa. 2.
Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.
IMPORTANT FOR LASER PRODUCTS IMPORTANTE PARA PRODUCTOS LÁSER IMPORTANTE PARA PRODUCTOS LASER REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS/ 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE 2 WARNING LABEL, PLACED INSIDE THE UNIT 1 ETIQUETA DE CLASIFICACIÓN, PROVISTA SOBRE LA SUPERFICIE EXTERIOR 2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL 1 ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE POSTERIOR DA CAIXA DO APARELHO CLASS LASER INTERIOR DE LA UNIDAD 2 ETIQUETA DE ADVERTÊN
English Introduction We would like to thank you for purchasing one of our JVC products. Before operating this micro component system, read this manual carefully and thoroughly to obtain the best possible performance from your system, and retain this manual for future reference. About This Manual Power sources This manual is organized as follows: • When unplugging from the wall outlet, always pull the plug, not the AC power cord.
Introduction .......................................................... 1 Playing Back a Tape ........................................... 20 About This Manual ............................................................... 1 Precautions ........................................................................... 1 Playing Back a Tape — Basic Operation ........................... 20 Fast-Winding a Tape ...........................................................
English Location of the Buttons and Controls Become familiar with the buttons and controls on the units.
English Continued Front Panels Buttons behind the sliding panel AX-UXG66 1 2 3 4 5 6 7 Stereo Amplifier 1 2 34 56 78 9p button and STANDBY/ON lamp (11)* MULTI JOG dial FM/AM button (14)* OPEN/CLOSE button (13)* Display window VOLUME dial (12) AUX button (13, 24)* DISPLAY /CHARA.
English Continued Become familiar with the buttons on the remote control. Remote Control Remote Control REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE 1 3 5 7 2 ACTIVE BASS EX. CLOCK/TIMER 4 6 TREBLE BASS SLEEP FM MODE PLAY MODE REPEAT 8 9 DIMMER AUTO PRESET TITTLE/EDIT ENTER DISPLAY /CHARA.
Unpacking After unpacking, check to be sure that you have all the following items. The number in the parentheses indicates the quantity of the pieces supplied. • • • • • • AM loop antenna (1) FM antenna (1) Remote control (1) Batteries (2) Speaker cords (2) External wire (1) Connecting the System Control Cables and the External Wire UX-G66 micro component system consists of three units, AX-UXG66 Stereo Amplifier, XT-UXG66 Compact Disc/Tuner, TD-UXG66 Cassette Deck, and SP-UXG66 Speaker System.
English Continued Connecting MD Recorder XM-G6 Connecting Antennas You can also connect the MD recorder XM-G6 (not supplied), specifically designed for UX-G66. This unit will complete UX-G66 micro component system. When you connect and use this unit, refer to the Instructions supplied with it for details.
English Continued Connecting Speakers AM antenna You can connect the speakers using the speaker cords. 1 2, 3 Vinyl-covered wire (not supplied) ANTENNA Red AM LOOP Speaker Cord Speaker Cord AM EXT FM 75 COAXIAL RIGHT LEFT SPEAKERS Black AM loop antenna (supplied) 1 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. Right speaker 1 2 Turn the AM loop antenna until you have the best reception.
English Continued Connecting Other Equipments To connect audio equipment with an optical digital input terminal You can connect the following equipments to the system: By using both an optical digital cable (not supplied) and an audio cable (not supplied), connect: • Between the optical digital input terminal on the other equipment and the optical digital output terminal on XT-UXG66. • Between the audio output jacks on the other equipment and the ANALOG IN jacks.
DIMMER REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE English Basic Settings DIMMER ACTIVE BASS EX. CLOCK/TIMER CLOCK/TIMER SLEEP OPEN/CLOSE STANDBY/ON M I C R O BASS TREBLE PLAY MODE REPEAT FM MODE C O M P O N E N T S Y S T E M U X - G 6 6 MULTI JOG AUTO PRESET AUX FM/AM MULTI JOG TITTLE/EDIT DISPLAY /CHARA. CANCEL Display window > SET DOWN MD AUX Before operating the system any further, set the clock built in this system first, then some other basic settings.
English Common Operations PANEL OPEN/CLOSE REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE DIMMER ACTIVE BASS EX. CLOCK/TIMER BASS SLEEP BASS FM MODE TREBLE STANDBY/ON (standby/on) ACTIVE BASS EX. OPEN/CLOSE STANDBY/ON M I C R O PLAY MODE REPEAT C O M P O N E N T S Y S T E M U X - G 6 6 TREBLE AUTO PRESET TITTLE/EDIT OPEN/CLOSE ENTER BASS AUX FM/AM MULTI JOG DISPLAY /CHARA.
• To save the power consumption, make use of Dimmer feature (see page 10). • To switch off the power supply completely, unplug the AC power cord from the AC outlet. STANDBY/ON lamp goes off. When you unplug the AC power cord or if a power failure occurs The clock is reset to “0:00” right away, while the tuner preset stations will be erased in a few days. English Continued Reinforcing the Bass Sound The richness and fullness of the bass sound is maintained regardless of how low you set the volume level.
English Continued Operating the Sliding Panel Listening to the External Equipment You can use the sliding panel to enable advanced operations features provided for UX-G66 micro component system. You can listen to an external equipment such as MD recorder, VCR, and other auxiliaries. First make sure that the external equipment is properly connected to the system (see page 7 and 9). For operation of the equipment, refer to its Instructions.
English Listening to FM and AM Broadcasts Buttons behind the sliding panel REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE ACTIVE BASS EX. CLOCK/TIMER BASS PANEL OPEN/CLOSE DIMMER TREBLE DISPLAY /CHARA. 4 ¢ SET CANCEL ENTER PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMER SLEEP FM MODE FM MODE PLAY MODE REPEAT AUTO PRESET AUTO PRESET TITTLE/EDIT DISPLAY /CHARA.
English Continued Preset Station You are possibly not allowed to use the feature until the station presetting completes. In some cases, test frequencies have been already memorized for the system since the factory examined the preset station features before shipment. This is not a malfunction. 5 The tuned station in step 1 is now stored in the preset channel selected in step 3. Storing a new station on an used channel erases the previously stored one.
English Playing Back a CD Buttons behind the sliding panel BASS TREBLE PLAY MODE REPEAT TITTLE/EDIT FM MODE AUTO PRESET CANCEL UP < SET 4 ¢ SET CANCEL ENTER PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMER REPEAT ENTER DISPLAY /CHARA. DISPLAY /CHARA.
English Continued 4 Press 6 (play/pause) button on the CD unit. Each track of the CD starts playing one after another, and stops when the final track has finished playing. To go to another track Before or during playback, press 4 / ¢ button repeatedly: Press ¢ button: Skips to the beginning of the next and succeeding tracks. Press 4 button: Goes back to the beginning of the current and previous tracks. • To stop playing back for a moment, press 6 (play/pause) button on the CD unit.
4 Press SET button to program the track number. English Continued To erase all the programed data After playing back the CD, you can erase all the programed track data by pressing 7 (stop) button. New program can be entered again.
English Continued Playing at Random — Random Play Repeating Tracks — Repeat Play The tracks of the loaded CD will play in no special order (at random) when you select this mode. You can have the entire disc, the programed tracks, or the individual track repeat as many times as you like. 1 1 2 Place a CD. If the current playing source is not the CD, press 6 (play/pause) button on the CD unit, then 7 (stop) button before going to the next step.
English Playing Back a Tape Buttons behind the sliding panel DISPLAY /CHARA. CANCEL UP DISPLAY /CHARA.
English Continued 5 Press 7 (stop) button to stop playback the tape. To skip forward to the next music 6 Press 0 (open/close) button directly to stop and remove the tape. Press the button same as the tape direction indicator as follows: 3 ] Press ¢ button. 2 ] Press 4 button. While the system is turned off (standby mode) Pressing ` (playback) or TAPE ` (playback) button automatically switches the system turned on and starts playback if a tape is already loaded.
English Recording onto a Tape Buttons behind the sliding panel TITTLE/EDIT DISPLAY /CHARA. ENTER DISPLAY /CHARA.
English Continued REC indicator lights red to show the recording pause mode, and “TAPE REC” appears in the display window as follows, or Dolby B NR Press DOLBY B NR button before recording to reduce frequency response noise. When the tape is played back later, also press the button with its lamp lit. Recording in Auto Reverse 1 To change the recording source You cannot change the selected source during the recording pause mode.
When CD playback finished, the CD unit first, then the cassette deck stops recording automatically. CD application on UX-G66 system can be recorded with a simple, one-touch operation. 1 2 3 Place a recordable tape and a source CD into each tray. • To record using Dolby B NR, press the DOLBY B NR button before recording so that its lamp near the button lights orange. Press 6 (play/pause) button on the CD unit, then 7 (stop) button to set the system to CD operation mode.
English Using the Timers Buttons behind the sliding panel REMOTE CONTROL RM-SUXG6E PANEL OPEN/CLOSE DIMMER ACTIVE BASS EX. CLOCK/TIMER BASS TREBLE PLAY MODE REPEAT PANEL OPEN/CLOSE SLEEP (standby/on) SLEEP FM MODE CLOCK/TIMER DISPLAY /CHARA. 4 ¢ SET CANCEL ENTER PLAY MODE SET CANCEL AUTO PRESET DISPLAY /CHARA.
5 Rotate MULTI JOG dial (< / > button on the remote control also available) to select the minute of the timer-off time, then press SET button. 2 6 Rotate MULTI JOG dial (< / > button on the remote control also available) to select either “TUNER FM” or “TUNER AM,” then press SET button. Using Daily Timer 7 Rotate MULTI JOG dial (< / > button on the remote control also available) to select a preset channel, then press SET button. Press SET button to call the previous settings for next timer recording.
English Continued 5 Rotate MULTI JOG dial (< / > button on the remote control also available) to select the minute of the timer-off time, then press SET button. 6 Rotate MULTI JOG dial (< / > button on the remote control also available) to select the source, then press SET button. TUNER TUNER (MD) CD FM AM (AUX TAPE AUX DIGITAL) TUNER FM: Tunes into a preset FM station. Go to step 7. TUNER AM: Tunes into a preset AM station. Go to step 7. CD: Plays a CD. Prepare a CD, then go to step 7.
English Using Sleep Timer Timer Priority With Sleep Timer, you can fall asleep to your favorite music or radio program. Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps. Here are the priorities for each timer. How Sleep Timer actually works The system automatically turns off after the selected time length passes while playing any source.
English Maintenance and Additional Information General Notes In general, you will have the best performance by keeping your CDs, cassette tapes and the mechanism clean. • Store CDs and cassette tapes in their cases, and keep them in cabinets or on shelves. • Keep the CD disc tray, and the cassette tapes tray closed when not in use. Handling CDs • Only CDs bearing this mark can be used with this system. However, continued use of irregular shape CDs (e.g. heart shape, octagonal) can damage the system.
English Handling Cassette Tapes Types of Cassette Tapes Cautions regarding handling This cassette deck unit incorporates an Automatic Tape Detection function. This mechanism uses the tape-type detection holes to distinguishes which type of tape was inserted, and sets the bias and equalizer to the optimum settings for that tape automatically. The following types of tapes may be used with this cassette deck unit. • Do not touch the surface of the tape or pull the tape out of the cassette.
English Troubleshooting If you are having a problem with your system, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible Cause No sound is heard. • Poor radio reception. Unable to record onto a tape. Action • • Connections are incorrect, or loose. Headphones are connected. • Volume level is set to “– –”.
Stereo Amplifier AX-UXG66 Output power 48 W (24 W + 24 W) at 6 Ω (Max.) Load impedance: 6 Ω (6 Ω to 16 Ω allowance) Audio output level/Impedance (at 1 kHz): Sub Woofer 800 mV/440 Ω Power requirement: [A] AC 110 V – 120 V/ 220 V – 240 V , [B] AC 115 V/230 V (adjustable with the voltage selector), 50 Hz/60 Hz Power consumption: [A] 59 W (at operation) [B] 54 W (at operation) 2.0 W (on standby: with Dimmer) Dimensions (approx.): 182 mm x 81 mm x 313 mm (W/H/D) Mass (approx.): 3.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia and U.K.) Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU., Canadá, Australia, ni el Grã-Bretanha) Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os E.U.A., o Canadá, a Austrália e o Reino Unido) UNPLUG MAINS (AC) CORD FROM WALL OUTLET,WHEN CONNECTING THIS. STEREO AMPLIFIRE MODEL NO. AX-UXG6 SYSTEN NO.
