User's Manual

v
SDI AUDIO OUTPUT SETTING
Set the channel (Lch, Rch) for outputting the SD-SDI/HD-SDI
audio.
Setting
Values
Description
CH1-CH2 Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH1 and Rch to CH2.
CH3-CH4 Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH3 and Rch to CH4.
CH5-CH6 Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH5 and Rch to CH6.
CH7-CH8 Set the audio output from this unit (Lch, Rch)
by assigning Lch to CH7 and Rch to CH8.
v
1440 CONVERSION
When the HD-SDI digital video input signal is 1080, you can
select whether to record in 1920x1080 or 1440x1080.
Setting
Values
Description
OFF Records the SDI signals as they are in
1920x1080.
ON Records the SDI signals upon converting
them from 1920x1080h1440x1080.
Memo:
v
SDI signals for which this feature is applicable to are
1920x1080/59.94i, 1920x1080/23.98p, and
1920x1080/23.98psf.
v
SDI signals that can be recorded with this unit are
1920x1080/59.94i, 1280x720/59.94p, 1920x1080/23.98p,
1920x1080/23.98psf, 1280x720/23.98p, and
720x480/59.94i(SD).
v
RECLOCK
Setting to “ON” helps to further stabilize the [THROUGH
OUT] output.
To output signals as they are, set to “OFF”.
Setting
Values
Description
OFF Use this setting if you do not want to use the
Reclock feature.
ON Use this setting if you want to use the
Reclock feature.
v
TIME CODE INPUT SETTING
You can select whether to add a time code while recording
SDI input signals with this unit.
Setting
Values
Description
OFF Use this setting if you want to disable time
code input.
TIME CODE When there are multiple time code inputs
from the SDI device, such information will
be superimposed over the SDI video input.
DATE &
TIME
This unit superimposes the current date/
time over the SDI video input.
v
TIME CODE DISPLAY POSITION
For setting the time code display position.
Setting Values
Description
LOWER LEFT Sets the time code display position to the
bottom left.
LOWER
RIGHT
Sets the time code display position to the
bottom right.
UPPER LEFT Sets the time code display position to the
top left.
UPPER RIGHT Sets the time code display position to the
top right.
CENTER Sets the time code display position to the
center.
Settings Menu
86
2012/3/8 13:53:0