UX-G48[B].
UX-G48[B].book Page 1 Friday, June 22, 2007 11:28 AM Warnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
UX-G48[B].book Page 2 Friday, June 22, 2007 11:28 AM Information for Users on Disposal of Old equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.
UX-G48[B].book Page 1 Friday, June 22, 2007 11:28 AM Introduction Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the System. Precautions Playable Disc/File Types Installation • Install the System in a location with adequate ventilation to prevent internal heat build-up in the System.
UX-G48[B].book Page 2 Friday, June 22, 2007 11:28 AM Caution for DualDisc playback The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of the Non-DVD side of a DualDisc in this product may not be recommended. IMPORTANT: Before playing a disc/file, make sure of the following... • Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays.
connection.fm Page 3 Monday, July 2, 2007 12:50 PM Connections Do not connect the power cord until all other connections have been made. Supplied accessories • Connect AV (SCART) directly to the video input of your TV. Connecting AV (SCART) to a TV via a VCR may interfere with your viewing when playing back copyprotected discs/files. Connecting AV (SCART) to an integrated TV/VCR system may also interfere with your viewing. Check to be sure that you have all the following items.
UX-G48[B].book Page 4 Friday, June 22, 2007 11:28 AM ~ AM/FM antenna Ÿ Speakers To assemble the AM loop antenna • When connecting the speaker cords, match the polarity of the speaker terminals: red to (+) and black to (–). Press and hold To connect AM/FM antenna AM loop antenna (supplied) Turn it until the best reception is obtained. Insert Release If the cords are covered with vinyl, remove the vinyl to expose the tip of the cord by twisting the vinyl.
UX-G48[B].book Page 5 Friday, June 22, 2007 11:28 AM To connect the powered subwoofer From the powered subwoofer (not supplied) The connected subwoofer can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals encoded in multi-channel software. • Before plugging the System to the power supply, make sure that the powered subwoofer is turned off.
UX-G48[B].book Page 6 Friday, June 22, 2007 11:28 AM Display Indicators The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicators illuminate on the display. 12 34 er t 5 1 HP SUR (Headphone Surround) indicator • Lights when Headphone Surround is activated. 2 USB indicator • Lights when “USB MEM” is selected as the source. 3 Disc format indicators • SVCD: lights when playing back an SVCD.
UX-G48[B].book Page 7 Friday, June 22, 2007 11:28 AM Daily Operations—Playback In this manual, operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. Remote control DIMMER 1 Number buttons RETURN ENTER/SET TOP MENU/PG MENU/PL , , , GROUP/TITLE 7 GROUP/TITLE SKIP 4, ¢ FM/PLAY MODE 8 1, ¡ QP LINK DVD/LINE LEVEL 3 SHIFT 1 2 Select the source.
UX-G48[B].book Page 8 Friday, June 22, 2007 11:28 AM How to select a number DIMMER SLEEP A.STANDBY 1 2 3 3D P/HP S C.VOICE CLOCK/TIMER 4 5 ZOOM 6 ANGLE SCAN MODE 7 8 9 RETURN CANCEL VFP 10 0 10 Examples: To select number 5, press 5. To select number 10, press 10. To select number 15, press 10, 1, then 5. To select number 30, press 10, 3, then 0. To select number 125, press 10, 10, 1, 2, then 5.
UX-G48[B].book Page 9 Friday, June 22, 2007 11:28 AM Listening to the TV Sound You can listen to the TV sound through this System when the TV is connected using the SCART cable (see page 5). LINE/ TV SOUND LINE (See page 11.
UX-G48[B].book Page 10 Friday, June 22, 2007 11:28 AM To select a chapter/track/file • For VCD/SVCD, cancel PBC (see the right column). While playing... • When you press 4 for the GROUP/TITLE SKIP first time, you will go back to the beginning of the current chapter/track/file. To play back using the disc menu Remote ONLY 7 For DVD Video: 1 Show the disc menu. TOP MENU/PG MENU/PL PTY SEARCH 2 Select an item on the disc menu.
UX-G48[B].book Page 11 Friday, June 22, 2007 11:28 AM Playing Back a Digital Audio Player INFO While QP Link is playing the device... • For connecting a digital audio player, see page 5. Bubbles appear when QP Link is working. To listen to digital audio player You can listen to the digital audio player connected to the LINE IN jack. • Make sure to turn down the volume on the System to minimum level before starting playback. LINE/ TV SOUND Bubbles disappear when the sound signal stops or is too weak.
UX-G48[B].book Page 12 Friday, June 22, 2007 11:28 AM Daily Operations—Sound & Other Adjustments To drop the volume in a moment Remote control SLEEP A.STANDBY CLOCK/TIMER SCAN MODE VFP DISPLAY DIMMER 3D P/HP S C.VOICE CANCEL , , , ENTER/SET FADE MUTING Remote ONLY To restore the volume, press again, or adjust the volume level. Adjusting the Sound INFO To reinforce the heavy sound This boosts the low and high frequency sound—Sound Turbo II.
UX-G48[B].book Page 13 Friday, June 22, 2007 11:28 AM Creating 3-Dimensional Sound Field —3D Phonic Remote ONLY • This only functions while listening to disc/USB mass storage class device. • This does not function for MPEG-1/MPEG-2/DivX files. While playing... 3D P/HP S ACTION Making Dialogues Clear—Clear Voice When you play back a disc or USB mass storage class device, you can make the singer’s voices or dialogues of the movie clear—Clear Voice.
UX-G48[B].book Page 14 Friday, June 22, 2007 11:28 AM Changing the Scanning Mode Remote ONLY INFO 2 Select a preset picture tone. PTY This System supports progressive scanning. Select the video signal output according to the type of your TV. If you connect a progressive TV through the COMPONENT VIDEO OUT jacks, you can enjoy a high quality picture playback by selecting “PROGRESS.” Before playback... PTY RGB Y/C PROGRESS CINEMA USER2 USER1 NORMAL Normally select this.
UX-G48[B].book Page 15 Friday, June 22, 2007 11:28 AM Remote ONLY Setting the Clock INFO Without setting the built-in clock, you cannot use Daily Timers (see page 29). • To exit the clock settings, press CLOCK/TIMER (while holding SHIFT) as required. • To correct a mis-entry during the process, press CANCEL (while holding SHIFT). You can return to the previous step.
UX-G48[B].book Page 16 Friday, June 22, 2007 11:28 AM Advanced Radio Operations Remote control Searching for a Program by PTY Codes Remote ONLY DISPLAY PTY SEARCH You can locate a particular kind of program from the preset channels (see page 8) by specifying the PTY codes. To search for a program using the PTY codes TA/News/Info PTY , 1 While listening to an FM station... MENU/PL PTY SEARCH SHIFT (while holding...
UX-G48[B].book Page 17 Friday, June 22, 2007 11:28 AM Switching Temporarily to a Program of Your Choice Automatically Remote ONLY The Enhanced Other Networks function allows the System to switch temporarily to a preset FM station broadcasting a program of your choice (TA, NEWS, or INFO). • This function works while listening to an FM station providing the required signals. While listening to an FM station, select the program type. TA SET UP TA/News/ Info NEWS OFF INFO (Canceled) (while holding...
UX-G48[B].book Page 18 Friday, June 22, 2007 11:28 AM Unique Video Disc/File Operations Remote ONLY Selecting the Audio Track Remote control INFO For DivX files/DVD Video: While playing back a chapter/ file containing several audio languages, you can select the language to listen to. For DVD-VR/SVCD/VCD: While playing back a track, you can select the audio channel to listen to. • For DVD Video/DVD-VR/SVCD/VCD: You can also select the audio track using the on-screen bar (see page 24).
UX-G48[B].book Page 19 Friday, June 22, 2007 11:28 AM Remote ONLY Selecting the Subtitle Language For DivX files/DVD Video: While playing back a chapter/ file containing subtitles in different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.
UX-G48[B].book Page 20 Friday, June 22, 2007 11:28 AM Special Effect Playback To replay the previous scenes (One-Touch Replay) INFO Still picture playback To display the still picture: To resume normal playback: While playing... Disc USB mass storage class device DVD/CD USB MEMORY Remote ONLY • This function is only used while playing DVD Video/ DVD-VR. While playing.... The playback position moves back about 10 seconds before the current position (only within the same title).
UX-G48[B].book Page 21 Friday, June 22, 2007 11:28 AM Advanced Playback Operations 2 Select chapters/tracks/files you want for Program Remote control Number buttons CANCEL , DVD/CD 3 8 7 3 4 Play. 1 For DVD Video and MP3/WMA/WAV files: Select a title or group number. 2 Select a chapter or track/file number. • To select a number, see “How to select a number” on page 8. Repeat step 2 until you complete your program. Start playback. Playback starts in the order DVD/CD you have programmed.
UX-G48[B].book Page 22 Friday, June 22, 2007 11:28 AM To modify the program To skip a chapter/ track: Before or after playback... To pause: To stop: To erase the last step: To release, press DVD/CD 3. CANCEL 0 To exit Random Play Before or after playback... (while holding...) To erase the entire program: To add another step in the program: 2 sec. FM/PLAY MODE Repeat step 2 on page 21.
UX-G48[B].book Page 23 Friday, June 22, 2007 11:28 AM • For DVD-VR: While playing an Original Program... REPEAT A-B REPEAT A-B Repeat REP CHAP REP PG REP OFF REP ALL (Canceled) 1 While playing (without PBC for SVCD/VCD), select the start point (A). While playing a Play List... REPEAT A-B REPEAT You can repeat playback of a desired portion by specifying the beginning (point A) and the ending (point B). • A-B Repeat cannot be used for MP3/WMA/WAV/JPEG/ MPEG-1/MPEG-2/DivX files and some DVDs.
UX-G48[B].
UX-G48[B].book Page 25 Friday, June 22, 2007 11:28 AM To operate using the On-screen Bar To change the time information Ex.: Selecting a subtitle (French) for DVD Video While “DVD/CD” is selected as the source... You can change the time information on the on-screen bar and the display window on the main unit. 1 Display the entire on-screen bar. 1 While playing, display the entire on-screen bar. Dolby D DVD-VIDEO 3/2.1ch TIME OFF TIME OFF ON SCREEN DVD-VIDEO Dolby D 3/2.
UX-G48[B].book Page 26 Friday, June 22, 2007 11:28 AM 4 Select the repeat mode you want. Time Search A-B TITLE* ALL Repeats a desired portion (see below). Repeats the current title. Repeats the disc (not applicable for DVD) or programmed track. CHAPTER** Repeats the current chapter. TRACK** Repeats the current track. OFF Cancels Repeat Play. 5 * While playing a DVD-VR, “PG” appears, and while playing a Play List, “PL” appears. ** During Program Play and Random Play, “STEP” appears. Finish the setting.
UX-G48[B].book Page 27 Friday, June 22, 2007 11:28 AM Chapter Search Ex.: When Original Program is selected. For DVD Video/DVD-VR: You can search for the chapter number to play. • This function is not available during Program Play and Random Play. ORIGINAL PROGRAM No 1 2 3 4 5 6 1 While playing, display the entire on-screen bar. 2 Select CHAP. . 3 Display the pop-up window. Dolby D 3/2.1ch DVD-VIDEO TIME TIME 1 2 TOTAL 1:25:58 1:01:58 CHAP233 TOTAL TITLE TITLE 14 2CHAP OFF 1/3 1/3 CHAP.
UX-G48[B].book Page 28 Friday, June 22, 2007 11:28 AM Control screen for MP3/WMA/WAV/JPEG/MPEG1/MPEG-2/DivX files The control screen automatically appears on the TV screen when the System detects MP3/WMA/WAV/JPEG/MPEG1/MPEG-2/DivX files on the loaded disc or connected USB mass storage class device. • For still/moving picture, it appears when playback is stopped.
UX-G48[B].book Page 29 Friday, June 22, 2007 11:28 AM Daily Timer Operations Remote ONLY Setting the Daily Timer Remote control INFO Using Daily Timer, you can wake up with your favorite music. AUDIO CLOCK/TIMER CANCEL ENTER/SET , SHIFT You can store three Daily Timer settings; however, you can activate only one of the timers at any one time. • To exit the timer settings, press CLOCK/TIMER (while holding SHIFT) as required. • To correct a mis-entry during process, press CANCEL (while holding SHIFT).
UX-G48[B].book Page 30 Friday, June 22, 2007 11:28 AM 1 Set the hour then the minute for on-time. 2 Set the hour then the minute for off-time. 3 Select the playback source—“TUNER FM,” “TUNER AM,” “DISC,” “LINE,” “USB MEM,” or “TV SOUND.” To turn on or off the Daily Timer Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days. To cancel the Daily Timer 1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3) you want to cancel.
UX-G48[B].book Page 31 Friday, June 22, 2007 11:28 AM Setup Menu Operations Initial settings Remote Control INFO Remote ONLY You can change the settings of the System. • The Setup Menu can be used only when “DVD/CD” or “USB MEM’ is selected as the source. 1 Press SET UP while playback is stopped. LANGUAGE , , , SET UP MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH ENTER/SET 2 3 4 5 Press (or )to select the menu.
UX-G48[B].book Page 32 Friday, June 22, 2007 11:28 AM AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the rear. PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a builtin Dolby Digital decoder. STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
UX-G48[B].book Page 33 Friday, June 22, 2007 11:28 AM Additional Information Learning More about This System Connections (see pages 3 to 5) • Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the power cord. These could cause poor reception. • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.
UX-G48[B].book Page 34 Friday, June 22, 2007 11:28 AM • For JPEG files playback... – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played. * Baseline JPEG format: Used for digital cameras, web, etc. Progressive JPEG format: Used for web.
UX-G48[B].book Page 35 Friday, June 22, 2007 11:28 AM Advanced Playback Operations (see pages 21 to 23) Programming the Playing Order—Program Play: • While programming steps... Your entry will be ignored if you have tried to program an item number that does not exist (for example, selecting track 14 on a disc that only has 12 tracks). Playing Repeatedly: • A-B Repeat is available only within the same title/ program/track.
UX-G48[B].book Page 36 Friday, June 22, 2007 11:28 AM Troubleshooting General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the power cord and then plug it back in. Unable to operate the System from the remote control. ] The path between the remote control and the remote sensor on the System is blocked.
UX-G48[B].
UX-G48[B].
Spec.fm Page 39 Tuesday, June 26, 2007 1:13 PM General Specifications Amplifier section—CA-UXG49/CA-UXG48 Output Power: 40 W (20 W + 20 W) at 6 Ω (10% THD) Audio Input LINE IN: 500 mV/50 kΩ (at “IN_LVL1”) 250 mV/50 kΩ (at “IN_LVL2”) 125 mV/50 kΩ (at “IN_LVL3”) Audio output LINE OUT: 1.0 Vrms (47 kΩ) (at “OUT_LVL1”) 2.
UX-G48[B].book Page 40 Friday, June 22, 2007 11:28 AM Parts Index Remote control Button AUDIO TV 7 ¡, 1 ¢,4 8 , , , , ENTER/SET (One-Touch Replay) 3D P/HP S A.STANDBY AHB PRO ANGLE AUDIO/MPX AUDIO VOL + , – BASS/TREBLE C.
UX-G48[B].book Page 2 Friday, June 22, 2007 11:28 AM SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
