Operation Manual

32
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
D. RANGE COMPRESSION You can enjoy powerful audio even at a low volume level while playing Dolby Digital software.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).
OTHERS menu
Item Contents
RESUME You can select Resume.
ON: The System resumes playback from the position where playback has been stopped.
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide.
DivX REGISTRATION The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.
UX-G48[B].book Page 32 Friday, June 22, 2007 11:28 AM