Operation Manual

16
Presetting Automatic DVD Sound
Increase Level
Remote
ONLY
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume when you change the source.
• This only functions for DVD Video and DVD-VR.
While “DVD/CD” is selected as the source...
NORMAL
Original recording level.
MIDDLE
Output level is increased (less than
“HIGH”).
HIGH
Output level is increased (more than
“MIDDLE”). [Initial setting]
Changing the Display Brightness
You can dim the display.
While the System is turned on...
DIM 1/2
Dims the display.
AUTO
Dims the display during playback of still/
moving pictures.
• Dimmer is canceled when playback stops.
(Canceled)
(while holding...)
Setting the ECO (ecology) Mode
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...
Changing the Scanning Mode
INFO
This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high quality
picture playback by selecting “PROGRE.”
Before playback...
RGB
For a conventional TV.
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
Y/C
For a conventional TV.
Select to send S-Video signals through the
AV (SCART) terminal.
PROGRE
For a progressive TV.
Select to enjoy a progressive scanned
picture through the VIDEO OUT
(COMPONENT) jacks.
• The PRGR. (Progressive) indicator lights
on the display.
(while holding...)
Remote
ONLY
(Canceled)
EN_UX-G950V[B]5.indb 16EN_UX-G950V[B]5.indb 16 08.4.18 5:32:13 PM08.4.18 5:32:13 PM