3D MEMORY CARD CAMERA RECORDER GY-HMZ1U/ GY-HMZ1E Detailed User Guide LYT2384-002A
Table of Contents Getting Started Precautions on Recording and Playing Back 3D Images ................................................................................... 4 Verifying the Accessories .............................................. 6 Attaching the Audio Unit ................................................ 7 Attaching an External Microphone ................................ 7 Charging the Battery Pack ............................................. 8 Grip Adjustment ...............................
ZEBRA .................................................................... 90 TELE MACRO (2D mode only) ................................ 90 CINEMA .................................................................. 90 TOUCH PRIORITY AE/AF ....................................... 90 DIS ........................................................................... 90 GAIN UP .................................................................. 90 WIND CUT .............................................................
Getting Started Precautions on Recording and Playing Back 3D Images 3D images can be recorded and played back on this unit. You can enjoy realistic and powerful 3D images recorded on this unit by playing back on a 3D compatible TV. Before use, please read the following precautions to ensure safe and comfortable viewing of the 3D images. Recording 3D Images This unit makes use of the misalignment between the images that enter the left and right eyes to create the 3D effect during 3D recording.
Getting Started Caution : 0 Recording and viewing of the 3D images is not recommended for people with medical history of photosensitivity, heart diseases, feel sick, suffer from lack of sleep, suffer from fatigue, or are drunk. Medical conditions may worsen. 0 Do not shoot a subject from a distance shorter than the minimum shooting distance. The 3D effect may become stronger and result in fatigue or discomfort. The minimum shooting distance of this camera is 80 cm (using wide angle).
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description . AC Adapter AP-V20U/AP-V20M 0 Connects to this unit to charge the battery pack. It can also be used when recording or playing back videos indoors. . Battery Pack BN-VF823U/BN-VF823E 0 Attaches to this unit to supply power. . Battery Charger AA-VF8 0 Enables the battery pack to be charged without using this unit.
Getting Started Attaching an External Microphone Attaching the Audio Unit The audio unit (with handle) is not attached to the camcorder unit when purchased. Attach the audio unit according to the following procedure. Audio Unit You can attach a microphone (optional) to the microphone holder. Knob Microphone Clamp Screw Clamp Microphone Holder Cable Shoe INPUT1/INPUT2 Connector .
Getting Started Charging the Battery Pack Charge the battery pack immediately after purchase and when the remaining battery power is low. The battery pack is not charged at the time of purchase. Charging the Battery with the Supplied Charger To Power Outlet Charging the Battery with this Unit 1 Battery Pack Attach the battery pack. Power Cord . Indicating Lamp 0 Align the top of the battery with the mark on this unit, and slide in until the battery clicks into place.
Getting Started Detaching the Battery Pack Grip Adjustment . Pad Caution : Be sure to use JVC battery packs. 0 If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed. Be sure to use the supplied JVC AC adapter. 0 If you use any other AC adapters/battery chargers besides the supplied JVC AC adapter, malfunctions may occur.
Getting Started Inserting an SD card When a commercially available SD card is inserted, recordings can be made to either the card or built-in memory separately. “Types of Usable SD Card” (A p. 11) “Approximate Video Recording Time” (A p. 55) Open the LCD monitor. 0 Make sure not to insert the card in the wrong direction. It may cause damage to the unit and card. 0 Turn off the power of this unit before inserting or removing a card. 0 Do not touch the metal contact area when inserting the card. Memo : .
Getting Started Types of Usable SD Card The following SD cards can be used on this unit. Operations are confirmed on the SD cards from the following manufacturers. 0 Panasonic 0 TOSHIBA 0 SanDisk 0 ATP* * Confirmed for SD/SDHC cards only. SD Card Memo : 0 Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. 0 To record videos with “VIDEO QUALITY” set to “THR”, use of a Class 10 card is recommended.
Getting Started Names of Buttons and Functions on the LCD Monitor Playback Screen (Video) 00:01:23 The following screens are displayed during the video and still image modes, and operate as the touch screens. 00:12:34 1 7 Recording Screen (Video/Still Image) 7 1 3 . 2 1 2 4 5 6 . 3 1 2 Parallax Adjustment Button 0 Adjusts the effect when 3D or LR MIX images are displayed on the LCD monitor. “Adjusting Parallax During Recording” (A p. 32) Zoom Button “Zooming” (A p.
Getting Started Playback Screen (Still Image) Index Screen 1 2 7 2011 1 8 4 5 6 7 2 3 4 5 6 . . 3 2 Group Playback Button 0 Continuous playback of grouped files (such as still images captured by continuous shooting). “Playing Back Still Images” (A p. 61) Parallax Adjustment Button 0 Adjusts the effect when 3D or LR MIX images are displayed on the LCD monitor. “Adjusting Parallax During Playback” (A p.
Getting Started 4 Clock Setting After setting the date and time, tap “SET”. CLOCK SETTING The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording. 1 DATE 1 1 TIME 2011 10 00 Open the LCD monitor. . SET 5 Select the region where you live and tap “SAVE”. . CLOCK/AREA SETTING GMT 0 The unit turns on.
Getting Started Resetting the Clock 5 Set the date and time. Set the clock with “CLOCK ADJUST” from the menu. 1 CLOCK SETTING Tap “MENU”. DATE 1 1 TIME 2011 10 00 . SET . 0 When the year, month, day, hour, or minute item is tapped, “∧” and “∨” will be displayed. 0 Tap ∧ or ∨ to adjust the year, month, day, hour, and minute. 2 Tap “Q”. 6 After setting the date and time, tap “SET”. CLOCK SETTING DATE 1 2011 10 00 SET Tap “CLOCK ADJUST”. COMMON . .
Getting Started Changing the Display Language The language on the display can be changed. Tap “MENU”. 2 Tap “Q”. When holding this unit, keep your elbows close to your sides to prevent camera shake. . . 1 Holding this Unit 0 Hold the LCD monitor with your left hand and adjust the angle accordingly. Holding the LCD monitor with your left hand helps to stabilize the camera for recording. Caution : 0 Be careful not to drop this unit during transportation.
Getting Started Tripod Mounting You can attach optional headphones to this unit. 1 Open the cover of the headphones connector. 2 Connect the headphones to the headphones connector. . . This unit can be mounted on a tripod (or monopod). This is useful for preventing camera shake. Attaching Headphones Caution : 0 To prevent injuries or damages which may result if this unit falls off, read the instruction manual of the tripod (or monopod) to be used and make sure that it is securely attached. .
Getting Started Using the Remote Control Operation Buttons on Remote Control Unit You can operate this unit from a distance away using the supplied remote control. 1 START /STOP SNAP SHOT 2 3 4 Remote Sensor 5 INDEX 6 . . INFO Memo : 0 Point the remote control toward the sensor directly and use it within 5 m from this unit. 0 The transmitted beam may not be effective or may cause incorrect operation when the sensor is directly exposed to sunlight or powerful lighting.
Getting Started Using this Unit Overseas The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p. 19) Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST” . “Setting the Clock to Local Time when Traveling” (A p.
Getting Started Setting the Clock to Local Time when Traveling 4 Tap “AREA SETTING”. CLOCK ADJUST Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. Restore the region settings after you returned from the trip. Tap “MENU”. . 1 AREA SETTING 5 Select the area you are traveling to and tap “SAVE”. AREA SETTING . GMT 2 Tap “Q”. . SAVE 0 The city name and time difference are displayed. 0 Tap to select the city name. .
Getting Started Setting Daylight Saving Time 4 Tap “DST SETTING”. When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is set 1 hour ahead. 1 CLOCK ADJUST Tap “MENU”. . DST SETTING 5 Tap “ON”. . DST SETTING DAYLIGHT SAVING TIME (DST) 2 Tap “Q”. CURRENT SETTING: ON OFF . ON . Memo : Tap “CLOCK ADJUST”. COMMON CLOCK ADJUST . 3 0 What is daylight saving time? Daylight saving time is the system of setting the clock 1 hour ahead for a fixed period in summer.
Getting Started Optional Accessories You can record for a longer time by using the optional battery pack. Product Name Description Battery Pack 0 BN-VF815U/BN-VF815E 0 BN-VF823U/BN-VF823E 0 Suitable for use as a spare battery pack. HDMI Cable 0 VX-HD310 0 VX-HD315 0 VX-HD320 0 VX-HD330 0 Allows viewing in high picture quality when connected to a TV. 0 Transmits video, audio, and control signals between devices. Memo : 0 For details on the provided accessories, refer to “Verifying the Accessories”.
Recording Taking Videos in 3D Mode 5 Start recording. You can record 3D images by pressing the 3D button to set to the 3D mode. During 3D mode, “3D” is displayed on the LCD monitor. Open the lens cover. . 1 0 Press again to stop. . Memo : Open the LCD monitor and select the video mode. . 2 0 The video mode icon A appears. Check if the recording mode is P Intelligent Auto. . 3 0 To record 3D images, refer also to ““Precautions on Recording and Playing Back 3D Images” (A p. 4) ”.
Recording Memo : 3D Recording Formats There are 2 types of 3D recording formats, namely “AVCHD” and “MP4(MVC)”. By default, “3D VIDEO REC FORMAT” is set to “MP4(MVC)” . “You can select a recording format for 3D video recording.” (A p. 92) o AVCHD Set to this recording format for higher compatibility. AVCHD Side-by-Side AVCHD 960 × 1080/60i (or AVCHD 960 × 1080/50i) The picture signals for left and right eyes are compressed by 1/2 horizontally and then combined in a side-by-side format.
Recording Taking Still Images in 3D Mode You can record 3D images by pressing the 3D button to set to the 3D mode. During 3D mode, “3D” is displayed on the LCD monitor. Open the lens cover. 2 Open the LCD monitor and select the still image mode. 0 When 3D recording is performed, still images will be saved in both 3D and 2D formats. 0 3D still images are saved as MP files (*.mpo). 0 3D still images cannot be printed. To print, make use of the 2D still image that is captured at the same time.
Recording Taking Videos in Intelligent Auto Mode Indications During Video Recording You can record without worrying about the setting details by using the Intelligent Auto mode. 0 Before recording an important scene, it is recommended to conduct a trial recording. 1 Open the lens cover. . . 0:00:00 [2:04] 2 Open the LCD monitor and select the video mode. Display Icon 1 Parallax Adjustment Value (3D mode only) Description Displays the adjusted value when performing parallax adjustment manually.
Recording Display Icon Description 8 Recording Mode Operation Buttons for Video Recording Displays the current recording mode of P (Intelligent Auto) or H (Manual). The mode changes with every press of the i.AUTO button. Displays the remaining time for video 9 Remaining Recording Time recording. 0 Scene Counter (Recorded Time) Displays the elapsed time of the video that is currently being recorded. o Scenes of Intelligent Auto Description E Captures one’s skin beautifully.
Recording Useful Settings for Recording Zooming 0 When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (only when using the battery pack) “ AUTO POWER OFF ” (A p. 112) 0 When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit detects faces and automatically adjusts its brightness and focus to record the faces more clearly. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p.
Recording Taking Still Images in Intelligent Auto Mode 4 Set the focus on the subject. Press halfway You can record without worrying about the setting details by using the Intelligent Auto mode. Open the lens cover. . 1 0 When focused, the focus icon lights up in green. 5 Take a still image. Open the LCD monitor and select the still image mode. 0 PHOTO lights up when a still image is being captured. . 2 . . Press fully 0 The still image icon B appears.
Recording Indications During Still Image Recording Operation Buttons for Still Image Recording 1/125 [6630] . . [6630] Display Icon 1 IMAGE SIZE Description Displays the icon of the image size. 0 The size of still images can be changed. “ IMAGE SIZE ” (A p. 104) 2 SHUTTER SPEED Displays the shutter speed. 3 Focus Lights up in green when focused. 4 Recording in Progress Appears when a still image is being captured.
Recording Useful Settings for Recording Zooming 0 When “QUICK RESTART” is set to “ON”, this unit turns on immediately if you open the LCD monitor within 5 minutes after the power is turned off by closing the monitor. “ QUICK RESTART ” (A p. 113) 0 When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (only when using the battery pack) “ AUTO POWER OFF ” (A p.
Recording When recording 3D images, parallax is automatically adjusted. If the left and right images of an object close to the camera do not appear to be in alignment, or the 3D effect of a distant object is weak, you can make adjustments by bringing the left and right images closer to each other. 0 Parallax can be adjusted when 3D or LR MIX images are displayed on the unit’s LCD monitor. “3D VIDEO REC FORMAT (3D mode only)” (A p. 92) 1 Tap k. 4 Tap “SET” to confirm. SET .
Recording Manual Recording 4 Tap “MENU”. 5 Tap the item to set manually. You can adjust settings, such as brightness and shutter speed, by using the manual mode. Manual recording can be set for both video and still image modes. Open the lens cover. . 1 VIDEO . SCENE SELECT Open the LCD monitor and select the video or still image mode. . 2 0 For details on the various manual settings, refer to “Manual Recording Menu”. . Memo : 0 The video A or still image B icon appears.
Recording Manual Recording Menu Name Description The following items can be set. WHITE BALANCE 0 Overall color on the screen can be adjusted. 0 Use this when the color on the screen appears differently from the actual color. “Setting White Balance” (A p. 41) BACKLIGHT COMP. 0 Corrects the image when the subject appears dark due to backlight. 0 Use this when shooting against the light. “Setting Backlight Compensation” (A p.
Recording *The image is only an impression. Scene Selection Common scenes that are often encountered can be recorded with the most suitable settings. Tap “MENU”. Effect b NIGHTALIVE Increases gain and brightens the scene automatically using a slow shutter when the surrounding is dark. To prevent camera shake, use a tripod. c NIGHT Captures night scenes naturally. w PORTRAIT Blurs the background to bring out the people in the picture.
Recording Adjusting Focus Manually 4 Adjust the focus. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. 1 Tap “MENU”. MENU . SET 0 Tap E to focus on a distant subject. 0 Tap p to focus on a near subject. . 5 2 Tap “SET” to confirm. Tap “FOCUS”. VIDEO FOCUS . . MENU 0 Tap ∧ or ∨ to move upward or downward for more selection. 0 Tap L to exit the menu. 0 Tap J to return to the previous screen. 3 Tap “MANUAL”. FOCUS AUTO .
Recording 4 Using Focus Assist Tap “SET” to confirm. Focused subject is outlined in color for more precise focus. 1 Tap “MENU”. . MENU Memo : . 0 The image becomes black and white while the outline of the focused object is displayed in the selected color. Change outline color if it becomes difficult to see. “ FOCUS ASSIST COLOR ” (A p. 100) 0 You can also use the control dial to adjust the focus. “Using the Control Dial for Recording” (A p. 45) 2 Tap “FOCUS ASSIST”. VIDEO .
Recording Adjusting Brightness 4 Adjust the brightness value. You can adjust the brightness to your preferred level. 1 Tap “MENU”. MENU . SET . 0 Compensation range during video recording: -6 to +6 0 Compensation range during still image recording: -2.0 to +2.0 0 Tap ∧ to increase the brightness. 0 Tap ∨ to decrease the brightness. 2 Tap “BRIGHTNESS ADJUST”. 5 VIDEO Tap “SET” to confirm. . BRIGHTNESS ADJUST 3 Tap “MANUAL”. BRIGHTNESS ADJUST AUTO . MANUAL 38 MENU .
Recording Setting Shutter Speed 4 Adjust the shutter speed. You can set the shutter speed to suit the type of subject. 1 Tap “MENU”. 1/30 MENU . SET . 0 Shutter speed can be set from 1/2 to 1/4000. (Up to 1/500 for still image.) 0 Tap ∧ to increase the shutter speed. 0 Tap ∨ to decrease the shutter speed. 2 Tap “SHUTTER SPEED”. 5 Tap “SET” to confirm. VIDEO 1/30 SHUTTER SPEED Tap “MANUAL”. SHUTTER SPEED AUTO MANUAL 0 After confirmation, the display for adjusting shutter speed disappears.
Recording 4 Setting Aperture Adjust the aperture. You can adjust the aperture to capture an image with only the subject in focus. 1 Tap “MENU”. F1.8 MENU . SET . 0 Aperture can be set from F1.2 to F5.6. 0 If you want the background to be in focus as well (larger aperture value), tap ∧. 0 If you want the background to appear blurry (smaller aperture value), tap ∨. 2 Tap “APERTURE PRIORITY”. 5 Tap “SET” to confirm. VIDEO F1.
Recording Setting White Balance You can set the color tone to suit the light source. Tap “MENU”. 2 Tap “WHITE BALANCE”. VIDEO Details AUTO Adjusts automatically to the natural colors. MWB Use this when the problem of unnatural colors is not resolved. 5200K Set this when shooting outdoors on a sunny day. 6000K Set this when shooting on a cloudy day or inside a shade. 3200K Set this when shooting under illumination such as a video light.
Recording Setting Backlight Compensation 1 Tap “MENU”. 2 Tap “ZEBRA”. You can correct the image when the subject appears too dark due to backlight. Tap “MENU”. . 1 . VIDEO 2 Tap “BACKLIGHT COMP.”. ZEBRA VIDEO . BACKLIGHT COMP. . 0 Tap ∧ or ∨ to move upward or downward for more selection. 0 Tap L to exit the menu. 0 Tap J to return to the previous screen. 0 Tap ∧ or ∨ to move upward or downward for more selection. 0 Tap L to exit the menu. 0 Tap J to return to the previous screen.
Recording Taking Close-up Shots 3 Tap “ON”. You can take close-up shots of an object using the tele macro function. TELE MACRO OFF . ON 0 After setting, the tele macro icon o appears. . *The image is only an impression. . 1 Tap “MENU”. Tap “TELE MACRO”. VIDEO Details OFF Enables close-up shots up to 1 m at the telephoto (T) end. Enables close-up shots up to 5 cm at the wide angle (W) end. ON Enables close-up shots up to 40 cm at the telephoto (T) end.
Recording Setting the USER Button 3 Select the desired function. By assigning one of manual adjustment functions that you frequently use to the USER button, you can access the function quickly. USER BUTTON SETTING NIGHTALIVE Assigning a Function to the USER Button TOUCH PRIORITY AE/AF 1 FOCUS Tap “MENU”. . . BRIGHTNESS ADJUST 2 Tap “USER BUTTON SETTING”. VIDEO . USER BUTTON SETTING 0 Tap ∧ or ∨ to move upward or downward for more selection. 0 Tap L to exit the menu.
Recording Using the Control Dial for Recording 4 Adjust the assigned function and record. 1 Press the ADJ button for about 3 seconds to display the control menu. . ADJ 0 A menu screen containing the functions that can adjusted by the control dial is displayed. 2 Select the function with the control dial. + . - 0 For details on setting the items and values of each function, refer to the following. A BRIGHTNESS ADJUST “Adjusting Brightness” (A p. 38) B FOCUS “Adjusting Focus Manually” (A p.
Recording Reducing Camera Shake When the image stabilizer is set, camera shake during recording can be effectively reduced. 1 Tap “MENU”. Display Setting Z(OFF) Deactivates image stabilizer. X(ON) Reduces camera shake under normal shooting conditions. r(ON (AIS)) Reduces camera shake more effectively when shooting bright scenes on the wide angle end. *Optical zoom (during 3D recording: approx. 5x, during 2D recording: approx. 10x) Memo : .
Recording Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) 5 Start recording and tap the desired position. “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. This function is available for both videos and still images. . Select video or still image mode. 0 Focus and brightness will be adjusted automatically based on the tapped position (face/color/area).
Recording 0 Subjects near the sides of the LCD monitor may not respond or be recognized when tapped. In this case, move the subject to the center and tap again.
Recording Setting SMILE LEVEL Display (Still image only) 4 Tap “ON”. SMILE LEVEL “SMILE LEVEL” allows you to set the items to display when faces are detected. This item is only displayed when “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”. ON Open the LCD monitor and select the still image mode. . 1 OFF . Setting 2 Tap “MENU”. 3 Tap “SMILE LEVEL”. Details OFF Displays only the frames when faces are detected. ON Displays the frames and smile levels (%) when faces are detected. .
Recording Recording at Intervals (TIMELAPSE RECORDING) 4 Tap to select a recording interval (1 to 80 seconds). TIME-LAPSE RECORDING Enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. 1SEC INTERVAL 10SEC INTERVAL Open the LCD monitor and select the video mode. 80SEC INTERVAL . 1 OFF .
Recording Indications During Time-Lapse Recording Time-Lapse Setting The greater the number of seconds, the longer the recording interval. Setting OFF Deactivates the function. 1SEC INTERVAL Takes a frame at 1-second intervals. Recorded videos will be played back at 30 times speed. 10SEC INTERVAL Takes a frame at 10-second intervals. Recorded videos will be played back at 300 times speed. 80SEC INTERVAL Takes a frame at 80-second intervals. Recorded videos will be played back at 2400 times speed. .
Recording Taking Group Shots (Self-timer) 4 Tap “2SEC” or “10SEC”. SELF-TIMER The 10-second self-timer and Face Detection self-timer are convenient functions for taking group photos. The 2-second self-timer is useful for preventing camera shake caused by pressing the shutter button. OFF 2SEC Memo : When shooting a photo using the self-timer function, use of a tripod is recommended. “Tripod Mounting” (A p. 17) 10SEC . FACE DETECTION Using the 2-/10-second Self-timer Set the focus on the subject.
Recording Using the Face Detection Self-timer 5 Pressing the SNAPSHOT button starts face detection, and shooting is performed three seconds after another person enters the frame. This function is useful when you want to include the photographer in the group photo. Select still image mode. . . 1 After making sure that everyone is facing the camera, press the SNAPSHOT button. 0 The still image icon B appears. Tap “MENU”. . 2 0 Frames appear around the faces of the subjects.
Recording Remaining Recording Time/Battery Power 4 Display the remaining battery power. REMAINING BATTERY You can check the remaining video recording time on the built-in memory and SD card as well as the remaining battery power. min Open the LCD monitor and select the video or still image mode. . . 1 MAX TIME 0 The video A or still image B icon appears. 0 If in the still image mode, go directly to step 4. 3 Display the remaining recording time. MAX RECORDING TIME BUILT-IN MEMORY 0h46m .
Recording Approximate Video Recording Time o 3D Mode (MP4(MVC)) Quality Built-in Memory (64 GB) SDHC/SDXC Card 4 GB 8 GB 16 GB 32 GB 48 GB 64 GB THR 4h 10 m 30 m 1h 2h 3h 4 h 10 m TSR 6 h 10 m 20 m 40 m 1 h 30 m 3 h 10 m 4 h 40 m 6 h 20 m o 3D Mode (AVCHD) Quality Built-in Memory (64 GB) SDHC/SDXC Card 4 GB 8 GB 16 GB 32 GB 48 GB 64 GB TXP 8 h 10 m 30 m 1h 2h 4 h 10 m 6 h 10 m 8 h 20 m TSP 11 h 40 m 40 m 1 h 20 m 2 h 50 m 5 h 50 m 8 h 40 m 11 h 50 m o 2D Mode
Recording Approximate Recording Time (Using Battery) o 3D Display on LCD Monitor Battery Pack Actual Recording Time Continuous Recording Time 3D Recording MP4(MVC) 3D Recording AVCHD 3D Recording MP4(MVC) 3D Recording AVCHD BN-VF815U/BN-VF815E 55 m 1h 1 h 45 m 2h BN-VF823U/BN-VF823E (Supplied) 1 h 20 m 1 h 35 m 2 h 40 m 3h5m o 2D Display on LCD Monitor Battery Pack Actual Recording Time 3D Recording MP4(MVC) 3D Recording AVCHD 2D Recording BN-VF815U/BN-VF815E 55 m 1h5m 1 h 20 m BN-V
Playback Playing Back Videos 4 Tap on the file to start playback. You can select and play back the recorded videos from an index screen (thumbnail display). Select video mode. . . 1 2011 0 The video mode icon A appears. Tap q to select the playback mode. . 2 Press the 3D button to select 3D or 2D mode. Memo : 0 Images recorded in 2D mode cannot be displayed as 3D images. 0 3D images may be played back when the 3D button lights up.
Playback Operation Buttons for Video Playback During Video Playback During Index Screen Display 0:12:34 . 0:01:23 Description . Display Display Description 1 Date Moves to the previous/next date 2 3D/2D Mode Displays the current playback mode of 3D or 2D. “3D” is displayed during 3D playback, while “2D” is displayed during 2D playback. 1 3D/2D Mode Displays the current playback mode of 3D or 2D. “3D” is displayed during 3D playback, while “2D” is displayed during 2D playback.
Playback Adjusting the Volume of Videos 4 Tap “PLAYBACK OTHER FILE”. A Press the zoom lever during video playback. Turn down the volume VIDEO . Turn up the volume Checking the Recording Date and Other Information . A Select a file and press the INFO button while playback is paused. You can display the recording date and duration of the selected file. PLAYBACK OTHER FILE 5 Tap on the file to start playback.
Playback Playing Back Still Images 4 Tap on the file to start playback. You can select and play back the recorded still images from an index screen (thumbnail display). The contents of the selected media are displayed on the index screen. “ REC MEDIA FOR IMAGE ” (A p. 111) Select still image mode. . . 1 2011 2 Tap q to select the playback mode. 0 Tap I/J to select the media for playback and change the index screen (thumbnail display). 0 Tap u to return to the index screen.
Playback Operation Buttons for Still Image Playback During Still Image Playback 1 During Index Screen Display a 4 0 5 . 2011 2 3 Display Description 1 Date Moves to the previous/next date 2 3D/2D Mode Displays the current playback mode of 3D or 2D. “3D” is displayed during 3D playback, while “2D” is displayed during 2D playback.
Playback Adjusting Parallax During Playback 4 Tap “SET” to confirm. When playing back 3D images of scenes where there are multiple objects arrayed in a line from near to far, or objects that are extremely close to the camera, you can change the way they appear to the eye. 0 Parallax can be adjusted when 3D or LR MIX images are displayed on the unit’s LCD monitor. Tap k. SET . 1 Caution : 0 Too much parallax may cause the 3D effect to be lost.
Playback Slideshow Playback 4 Tap on the thumbnail and tap d. Still images can be played back in a slideshow. 2011 Select still image mode. . 1 . “Operation Buttons for Still Image Playback” (A p. 61) Tap q to select the playback mode. 3 Press the 3D button to select 3D or 2D mode. . . 2 0 Images recorded in 3D mode and 2D mode are displayed on the index screen separately. Press the 3D button to switch to the desired mode for playback. 0 During 3D mode, “3D” is displayed on the LCD monitor.
Playback Searching for a Specific Video/Still Image 4 Tap on the file to start playback. SEARCH DATE 2011 When there is a large number of recorded videos and still images, it is difficult to look for the desired file from the index screen. Use the search function to find the file you want. 0 For both videos and still images, you can search by “SEARCH DATE” (recording date). . Date Search You can search and play videos or still images according to recording dates.
Playback Connecting to and Viewing on TV You can connect this unit to a TV for playback. Select the most suitable way of connecting to the TV based on the image to view (3D/2D image). 0 Refer also to the instruction manual of the TV in use. “Playing Back 3D Images” (A p. 66) “Playing Back 2D Images” (A p. 67) Unnatural Displays on TV Trouble Images do not appear on the TV properly. Action 0 Disconnect the cable and connect again. 0 Turn off and on this unit again.
Playback 5 Playing Back 3D Images Play back a file. If you are using a 3D compatible TV, you can play back 3D images by connecting to the HDMI connector. 0 Use the provided HDMI mini cable or an optional High Speed HDMI mini cable. 0 Refer also to the instruction manual of the TV in use. Close the LCD monitor. . 1 2011 “Playing Back Videos” (A p. 57) “Playing Back Still Images” (A p. 60) . Caution : 0 Close the LCD monitor to turn off the camcorder before connecting to a TV. 2 Connect to a TV.
Playback Operating in Conjunction with TV via HDMI Operation Method 2 Connecting this unit to an HDMI-CEC-enabled TV using the HDMI cable allows linked operations with the TV to be performed. 0 HDMI-CEC (Consumer Electronics Control) is an industry standard that enables interoperability between HDMICEC compliant devices that are connected via HDMI cables. 1 Memo : 0 Not all HDMI-control devices comply with the HDMI-CEC standard.
Playback Connecting via the HDMI Mini Connector 5 Play back a file. If you are using an HDTV, you can play back in HD quality by connecting to the HDMI connector. 0 Use a High Speed HDMI Cable. 0 Refer also to the instruction manual of the TV in use. Close the LCD monitor. . 1 2011 “Playing Back Videos” (A p. 57) “Playing Back Still Images” (A p. 60) . Memo : 0 Close the LCD monitor to turn off the camcorder before connecting to a TV. 2 Connect to a TV. To HDMI Mini Connector TV .
Playback 4 Connecting via the AV Connector Play back a file. By connecting the supplied AV cable to the AV connector, videos can be played back on a TV. 0 Refer also to the instruction manual of the TV in use. 1 2011 . Open the LCD monitor, then press and hold the power button for 2 seconds or more to turn off the power. “Playing Back Videos” (A p. 57) “Playing Back Still Images” (A p. 60) Memo : . 0 For questions about the TV or method of connection, contact your TV’s manufacturer.
Editing Deleting Unwanted Files Delete unwanted videos and still images when the space in the recording media is running out. The remaining space in the recording media increases after deleting the files. “Deleting the Currently Displayed File” (A p. 70) “Deleting Selected Files” (A p. 71) Deleting the Currently Displayed File Deletes the currently displayed file. Caution : 0 Deleted files cannot be restored. 1 Tap A. Memo : 0 Deleted files cannot be restored.
Editing Deleting Selected Files 4 Tap on the files to delete. Deletes the selected files. DELETE Caution : 2011 0 Deleted files cannot be restored. 1 Select video or still image mode. REL ALL STOP . SEL ALL . 0 P appears on the selected files. To remove P from a file, tap on the file again. 0 Tap “SEL ALL” to select all files. 0 Tap “REL ALL” to release all selections. 0 Still images that are recorded continuously within 2 seconds or with the continuous shooting mode will be grouped together.
Editing Protecting Files Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 72) “Protecting/Releasing Protection of Selected Files” (A p. 73) Protecting/Releasing Protection of the Currently Displayed File Protects or releases protection of the currently displayed file. 1 Tap “MENU”. 0:01:23 0:12:34 Caution : 0 When the recording media is formatted, even the protected files will be deleted.
Editing Protecting/Releasing Protection of Selected Files 5 Tap on the files to protect or release protection of. Protects or releases protection of the selected files. 1 PROTECT/CANCEL Select video or still image mode. 2011 REL ALL SET . SEL ALL . 0 I and P are displayed on the files that are already protected. To release protection of a file, tap on the file such that P is removed. 0 P appears on the selected files. To remove P from a file, tap on the file again.
Editing Capturing a Still Image in the Video during Playback 4 Tap pause e at the desired scene during playback. You can capture still images of the scenes you like in the recorded videos. 1 0:01:23 0:12:34 Select video mode. . MENU . 0 After pausing the video, you can fine-tune the point to capture by tapping forward slow-motion k and reverse slow-motion l. Tap q to select the playback mode. 5 Press the SNAPSHOT button. . 2 . Memo : 3 Tap on the desired video. .
Copying Creating a Disc Using a Connected Blu-ray Recorder 3 Tap the desired media. CONNECT TO OTHER SELECT MEDIA TO OPEN You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable. 1 Connect the USB cable and the AC adapter. SD CARD AC Adapter To AC Outlet (110 V to 240 V) Blu-ray recorder . 0 Turn off the camcorder by pressing the M button for about 2 seconds. To DC Connector 4 Perform dubbing on the Blu-ray recorder.
Copying Dubbing Files by Connecting to a DVD Recorder Dubbing Files to a VHS Tape Using a VCR You can dub videos in standard quality by connecting to a DVD recorder. 0 Refer also to the instruction manuals of the TV and DVD recorder. You can dub videos in standard quality by connecting to a VCR. 0 Refer also to the instruction manuals of the TV and VCR. 1 0 3D images cannot be copied to a VHS tape. Images recorded in 3D mode cannot be copied as 2D images.
Copying Copying Files to an SD Card 5 Tap “COPY”. VIDEO You can copy videos and still images from the built-in memory to SD card. Copying still images to cards makes it convenient to bring them to the shop for printing (developing). Caution : 2 Select video or still image mode. 6 Tap on the files to copy. QUANTITY:0000 2011 SEL ALL REL ALL SET QUIT . . 1 Select 3D or 2D mode. COPY . 0 Make sure that there is enough space left in the destination medium.
Copying Moving Files to an SD Card 5 Tap “MOVE”. VIDEO You can move videos and still images from the built-in memory to SD card. Files that are moved will be deleted from the built-in memory. Moving still images to SD cards makes it convenient to bring them to the shop for printing (developing). Caution : 1 MOVE . 0 Make sure that there is enough space left in the destination medium. 0 Videos and still images in the SD card cannot be moved to the built-in memory. 6 Tap on the files to move.
Copying 4 Copying to Computer You can read and copy the files on the built-in memory or SD card by connecting this unit to a computer using a USB cable. 1 Connect the USB cable and the AC adapter. To DC Connector AC Adapter To AC Outlet (110 V to 240 V) USB Cable (Provided) 0 Open the folder with the desired files. “List of Files and Folders” (A p. 80) To USB Connector . To USB Connector A Connect using the provided USB cable. B Connect the AC adapter to this unit.
Copying Disconnecting this Unit from Computer (Windows) Disconnecting this Unit from Computer (Mac Computer) 1 Throw the “No Name” icon into the trash can. Click “Safely Remove Hardware and Eject Media”. No name . Trash . Click 2 Click “Safely Remove USB Mass Storage Device”. 3 4 (For Windows Vista) Click “OK”. Disconnect the USB cable and close the LCD monitor. List of Files and Folders Folders and files are created in the built-in memory and SD card as shown below.
Copying Installing the Provided Software Verifying System Requirements (Guideline) o Operating Environment Windows Mac Computer CPU Intel Pentium 4, Xeon, Core Duo equivalent or higher SSE2 or higher required Multi-core/Multi CPU compliant Mac with Intel processor RAM At least 1 GB (At least 2 GB recommended) At least 2 GB OS Microsoft Windows 7 Home Premium (32/64-bit) / Professional (32/64-bit) / Ultimate (64-bit) Microsoft Windows Vista Service Pack 2 or later Business (32/64-bit) / Ultimate (6
Copying Installing the Provided Software 3 Click “Finish”. You can separate 3D images recorded in “MP4(MVC)” format into the left and right 2D images using the provided software. Load the provided CD-ROM into your computer. 2 Select a language and click “Next”. 0 Installation ends and icons are created on the desktop. 3D to LR Converter L R . Windows Vista / Windows 7 A Click “Run INSTALL.EXE” in the auto play dialog box. B Click “Common Settings Menu” on the user account control screen.
Copying JVC Software Licence Agreement 4 LIMITED WARRANTY 5 LIMITED LIABILITY 6 TERM IMPORTANT TO CUSTOMERS: PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE PROGRAM NAMED “DIGITAL PHOTO NAVIGATOR” (“Program”) ON YOUR PC. The right to use the Program is granted by Victor Company of Japan, Limited (“JVC”) to You only on the condition that You agree to the following. Should You not agree to the terms hereof, You may not install or use the Program.
Copying 7 EXPORT CONTROL Memo : 8 U.S. GOVERNMENT USER Caution : 9 You agree that You will not ship, transfer or export the Program or underlying information and technology to any countries to which Japan and other relevant countries have initiated an embargo on such goods. If You are an agency of the United States of America (the “Government”), You acknowledge JVC’s representation that the Program is a “Commercial Item” as defined in Federal Acquisition Regulation (FAR) part 2.
Menu Settings Operating the Menu There are two types of menus in this unit. 0 Main menu: Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively. 0 Q menu in main (common) menu: Menu that contains all common items in the video recording, still image recording, video playback, and still image playback modes.
Menu Settings Recording Menu (Video) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. Select video mode. 2 Tap q to select the recording mode. . 1 . 2011 Tap “MENU”. . 3 Setting Details SCENE SELECT Settings to suit the shooting condition can be selected. “Scene Selection” (A p. 35) *Displayed only in the manual recording mode. FOCUS Focus can be adjusted manually.
Menu Settings Setting Details BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 38) *Displayed only in the manual recording mode. SHUTTER SPEED Shutter speed can be adjusted. “Setting Shutter Speed” (A p. 39) *Displayed only in the manual recording mode. APERTURE PRIORITY Adjusts the aperture value. “Setting Aperture” (A p. 40) *Displayed only in the manual recording mode. WHITE BALANCE Adjusts the color according to the light source.
Menu Settings Setting Details SYSTEM SELECT Sets the video recording system. “ SYSTEM SELECT ” (A p. 92) 3D VIDEO REC FORMAT You can select a recording format for 3D video recording. “3D VIDEO REC FORMAT (3D mode only)” (A p. 92) *Displayed only in the 3D recording mode. VIDEO QUALITY Sets the video quality. “ VIDEO QUALITY ” (A p. 93) ZOOM Sets the maximum zoom ratio. “ZOOM (2D mode only)” (A p. 94) *Displayed only in the 2D recording mode. x.v.Color Captures the true colors. (Use an x.v.
Menu Settings SCENE SELECT FOCUS ASSIST COLOR Settings to suit the shooting condition can be selected. Operating Details “Scene Selection” (A p. 35) Sets the color of the outline of a focused object when Focus Assist is used. GREEN Outlines the focused object in green. BLUE Outlines the focused object in blue. Displaying the Item 1 Select video mode. 2 Tap q to select the recording mode. . Focused subject is outlined in color for more precise focus. Operating Details “Using Focus Assist” (A p.
Menu Settings BRIGHTNESS ADJUST GAIN UP Adjusts the overall brightness of the screen. Operating Details “Adjusting Brightness” (A p. 38) Makes the subject appear bright automatically when recording in dark places. SHUTTER SPEED Shutter speed can be adjusted. Operating Details “Setting Shutter Speed” (A p. 39) APERTURE PRIORITY Adjusts the aperture value. Operating Details “Setting Aperture” (A p. 40) Setting Details OFF Deactivates the function.
Menu Settings WIND CUT GRID Reduces the noise caused by wind. Displays gridlines to make it easier to detect when the subject appears slanted. Setting Details OFF Deactivates the function. ON Activates the function. Displaying the Item Setting Details OFF Turns off grid display. ON Turns on grid display. Displaying the Item Select video mode. 2 Tap q to select the recording mode. 1 Select video mode. 2 Tap q to select the recording mode. . . 1 2011 . . 2011 Tap “MENU”.
Menu Settings SYSTEM SELECT 3D VIDEO REC FORMAT (3D mode only) Sets the video recording system. You can select a recording format for 3D video recording. Setting Details Setting Details 60i (or 50i) Select this for normal recordings. AVCHD 24p Records videos like movies shot with film cameras. Records in AVCHD format. Set to this recording format for higher compatibility. MP4(MVC) Records in MP4(MVC) format. Set to this recording format for higher video quality.
Menu Settings VIDEO QUALITY Displaying the Item Sets the video quality. 1 Select video mode. 2 Tap q to select the recording mode. o 3D Mode (MP4(MVC)) Setting Details THR Enables recording in high picture quality. TSR Enables long recordings. Setting . o 3D Mode (AVCHD) Details TXP Enables recording in high picture quality. TSP Enables long recordings. 2011 o 2D Mode UXP Details Enables recording in the best picture quality. 0 Applies to Blu-ray discs only.
Menu Settings ZOOM (2D mode only) Displaying the Item Setting Details 10x/OPTICAL Enables recording with 1 - 10x optical zoom. Set this when digital zoom is not desired. 40x/DIGITAL Enables recording with 1 - 10x optical zoom and 11 - 40x digital zoom. 200x/DIGITAL Enables recording with 1 - 10x optical zoom and 11 - 200x digital zoom. 1 Select video mode. 2 Tap q to select the recording mode. . Sets the maximum zoom ratio. Memo : 2011 .
Menu Settings x.v.Color (2D mode only) 3D SOUND Captures the true colors. (Use an x.v.Color compatible TV for playback.) Records realistic audio sounds. Setting Details OFF Captures colors with the same standard as TV broadcasting. ON Captures the true colors. (for TVs that supports x.v.Color) Displaying the Item Details OFF Does not record with 3D sound effects. ON Records with 3D sound effects. Displaying the Item 1 Select video mode. 2 Tap q to select the recording mode.
Menu Settings MIC LEVEL MIC LEVEL SETTING Make the adjustments such that “MIC LEVEL” does not turn red. Sets the microphone level. Make the adjustments such that “MIC LEVEL” does not turn red. Setting Details OFF Hides display of microphone input level. ON Shows display of microphone input level. Caution : 0 When “3D VIDEO REC FORMAT” is set to MP4(MVC) and recording is performed together with HDMI output, the microphone input level will not be displayed.
Menu Settings HEADPHONE VOL. ADJ. 5 Adjust the volume level of the headphones. Sets the volume level of the connected headphones. Adjusting the Volume Level of Headphones During Recording Select video mode. . 1 . 0 To turn up the volume, tap “+” on the touch screen. 0 To turn down the volume, tap “-” on the touch screen. 0 Tap L to exit the volume adjustment screen. 2 Tap q to select the recording mode. 1 Select video mode. 2 Tap q to select the playback mode. . .
Menu Settings Recording Menu (Still Image) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. Select still image mode. 2 Tap q to select the recording mode. . 1 . 2011 Tap “MENU”. . 3 Setting Details SCENE SELECT Settings to suit the shooting condition can be selected. “Scene Selection” (A p. 35) *Displayed only in the manual recording mode.
Menu Settings Setting Details SHUTTER SPEED Shutter speed can be adjusted. “Setting Shutter Speed” (A p. 39) *Displayed only in the manual recording mode. APERTURE PRIORITY Adjusts the aperture value. “Setting Aperture” (A p. 40) *Displayed only in the manual recording mode. WHITE BALANCE Adjusts the color according to the light source. “Setting White Balance” (A p. 41) *Displayed only in the manual recording mode. BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight.
Menu Settings SCENE SELECT FOCUS ASSIST COLOR Settings to suit the shooting condition can be selected. Operating Details “Scene Selection” (A p. 35) Sets the color of the outline of a focused object when Focus Assist is used. FOCUS Focus can be adjusted manually. Operating Details “Adjusting Focus Manually” (A p. 36) FOCUS ASSIST Details RED Outlines the focused object in red. GREEN Outlines the focused object in green. BLUE Outlines the focused object in blue.
Menu Settings BRIGHTNESS ADJUST GAIN UP Adjusts the overall brightness of the screen. Operating Details “Adjusting Brightness” (A p. 38) Makes the subject appear bright automatically when recording in dark places. SHUTTER SPEED Shutter speed can be adjusted. Operating Details “Setting Shutter Speed” (A p. 39) APERTURE PRIORITY Adjusts the aperture value. Operating Details “Setting Aperture” (A p. 40) WHITE BALANCE Adjusts the color according to the light source.
Menu Settings GRID SHUTTER MODE Displays gridlines to make it easier to detect when the subject appears slanted. Continuous shooting settings can be adjusted. Setting Details OFF Turns off grid display. ON Turns on grid display. Displaying the Item 2 Details RECORD ONE SHOT Records one still image. CONTINUOUS SHOOTING Records still images continuously while the SNAPSHOT button is pressed. Memo : 0 You can change the continuous shooting speed with “CONT.
Menu Settings CONT. SHOOTING SPEED Displaying the Item Setting HIGH SPEED LOW SPEED Details 0 Shoots up to 11 still images continuously in the 3D still image mode at approximately 12 images/ second. 0 Shoots up to 40 still images continuously in the 2D still image mode at approximately 12 images/ second. 1 Select still image mode. 2 Tap q to select the recording mode. . Sets the speed for continuous shooting. Shoots continuously until the recording media is full. 2011 Memo : .
Menu Settings IMAGE SIZE Displaying the Item Sets the image size (number of pixels) for still images. 1 Select still image mode. 2 Tap q to select the recording mode. o 3D Mode Setting Details 1920X1080(2M) (16:9) Takes still images with aspect ratio 16:9. . Memo : 0 During 3D mode, IMAGE SIZE is fixed at 1920X1080(2M) (16:9) and cannot be changed. 0 When still images are captured in the 3D mode, they will be saved in both 3D and 2D formats.
Menu Settings Playback Menu (Video) You can delete or look for specific videos. Select video mode. . 1 Tap q to select the playback mode. Details SEARCH DATE Narrows down the video index screen according to recording dates. “ SEARCH DATE ” (A p. 105) PROTECT/ CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 72) “Protecting/Releasing Protection of Selected Files” (A p.
Menu Settings Playback Menu (Still Image) You can delete or look for specific still images. Select still image mode. . 1 2 Tap q to select the playback mode. Setting Details SEARCH DATE Narrows down the still image index screen according to recording dates. “Date Search” (A p. 64) PROTECT/ CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 72) “Protecting/Releasing Protection of Selected Files” (A p.
Menu Settings Common Menu Select video or still image mode. 2 Tap “MENU”. 3 Tap “Q”. . . . 1 Setting Details CLOCK ADJUST Resets the current time or sets to the local time when using this unit overseas. “Clock Setting” (A p. 14) “Setting the Clock to Local Time when Traveling” (A p. 20) “Setting Daylight Saving Time” (A p. 21) DATE DISPLAY STYLE Sets the order of year, month, day and the time display format (24H/12H). “ DATE DISPLAY STYLE ” (A p.
Menu Settings QUICK RESTART Reduces the power consumption within 5 minutes after the LCD monitor is closed to 1/3 of that used during recording. “ QUICK RESTART ” (A p. 113) REMOTE Enables remote control operation. “ REMOTE ” (A p. 113) TOUCH SCREEN ADJUST Adjusts the response position of the buttons on the touch screen. “ TOUCH SCREEN ADJUST ” (A p. 114) 3D DISPLAY WARNING (3D mode Sets whether to display warnings during 3D playback. only) “3D DISPLAY WARNING (3D mode only)” (A p.
Menu Settings CLOCK ADJUST Clock Set Style Resets the current time or sets to the local time when using this unit overseas. Operating Details “Clock Setting” (A p. 14) “Setting the Clock to Local Time when Traveling” (A p. 20) “Setting Daylight Saving Time” (A p. 21) The clock set style of this unit varies with the models. CLOCK SETTING DATE 2011 DATE DISPLAY STYLE 1 TIME 1 10 00 . Sets the order of year, month, day and the time display format (24H/12H). 1 Tap “MENU”.
Menu Settings Displaying the Item Sets the brightness of the LCD monitor. Setting Details Brightens the backlight of the monitor regardless of the surrounding conditions. 3 Sets to the standard brightness. 2 Darkens the backlight of the monitor regardless of the surrounding conditions. 1 Sets to dim brightness. Helps to save battery life when selected. AUTO Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors. Tap “MENU”. 2 Tap “Q”.
Menu Settings REC MEDIA FOR VIDEO REC MEDIA FOR IMAGE Sets the recording/playback media of videos. Sets the recording/playback media of still images. Setting Setting Details Details BUILT-IN MEMORY Records videos to this unit’s built-in memory. BUILT-IN MEMORY Records still images to this unit’s built-in memory. SD CARD Records videos to the SD card. SD CARD Records still images to the SD card. 1 Tap “MENU”. 1 Tap “MENU”. 2 Tap “Q”. 2 Tap “Q”. 3 Tap “REC MEDIA FOR VIDEO”.
Menu Settings OPERATION SOUND AUTO POWER OFF Turns on or off the operation sound. Prevents the situation of forgetting to turn off the power when this is set. Setting Details OFF Turns off the operation sound. ON Turns on the operation sound. Displaying the Item 1 Tap “MENU”. Setting Details OFF Power is not turned off even if this unit is not operated for 5 minutes. ON Turns off the power automatically if this unit is not operated for 5 minutes.
Menu Settings QUICK RESTART REMOTE Enables the power to turn on quickly when the LCD monitor is opened again within 5 minutes. Enables remote control operation. Setting Details OFF Deactivates the function. ON Enables the power to turn on quickly when the LCD monitor is opened again within 5 minutes. Memo : Setting Details OFF Disables remote control operation. ON Enables remote control operation. Displaying the Item 1 Tap “MENU”. 2 Tap “Q”. 3 Tap “REMOTE”.
Menu Settings TOUCH SCREEN ADJUST 5 Adjusts the response position of the buttons on the touch screen. 1 Tap “+” again to confirm the adjusted positions. (3 times in total) Tap “MENU”. CONFIRM THE ADJUSTMENT PRESS + MARK AGAIN . 1/3 . 0 Keep tapping “+” as its position changes with every tap. 0 If areas on the adjustment screen other than the “+” mark are tapped, errors will occur. In this case, try again from step 4. 2 Tap “Q”. 6 Tap “OK”. COMPLETED 3 Tap “TOUCH SCREEN ADJUST”. COMMON . .
Menu Settings 3D DISPLAY WARNING (3D mode only) VIDEO OUTPUT (2D mode only) Sets whether to display warnings during 3D playback. Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Setting Details Setting Details OFF Shows a 3D warning icon (*) instead of the 3D warning message. 4:3 ON Shows a 3D warning message at a regular interval. Select this when connecting to a conventional TV (4:3). 16:9 Select this when connecting to a widescreen TV (16:9).
Menu Settings HDMI OUTPUT Sets the output from the HDMI connector of this unit when it is connected to a TV. o 3D Mode Setting Details AUTO Output images according to the supported monitor output format. SIDE-BY-SIDE OUTPUT Outputs images from the HDMI connector in “SIDE-BY-SIDE OUTPUT” (960x1080ix2ch) regardless of the supported monitor output format. CERTAIN TV TYPES Outputs images from the HDMI connector in “SIDE-BY-SIDE OUTPUT” (960x1080ix2ch) if the format “1080i” is supported by the monitor.
Menu Settings Displaying the Item HDMI CONTROL 1 Sets whether to link operations with an HDMI-CEC compliant TV. Tap “MENU”. Setting Details OFF Turns off linked operations. ON Turns on linked operations. . Displaying the Item Tap “MENU”. 2 Tap “Q”. 3 Tap “HDMI CONTROL”. Tap “Q”. . . 2 1 Tap “HDMI OUTPUT”. COMMON . HDMI OUTPUT COMMON HDMI CONTROL . .
Menu Settings AUTO FINALIZE FACTORY PRESET Finalizes the discs created automatically so that they can be played back on compatible devices. Returns all the settings to their default values. Setting Details OFF Does not finalize the disc. Data can be added to the disc later. ON Finalizes the disc and sets it to a readable state. 1 Tap “MENU”. 2 Tap “Q”. 3 Tap “FACTORY PRESET”. Tap “MENU”. 2 Tap “Q”. . . 1 . Displaying the Item COMMON 3 Tap “AUTO FINALIZE”. COMMON . .
Menu Settings FORMAT BUILT-IN MEM. Displaying the Item Deletes all files on the built-in memory. Setting FILE Details 1 Tap “MENU”. 2 Tap “Q”. 3 Tap “FORMAT BUILT-IN MEM.”. Deletes all files on the built-in memory. FILE + Deletes all files on the built-in memory MANAGEMENT and resets the folder and file numbers to NO “1”. . COMMON FORMAT BUILT-IN MEM. . 0 All data on the built-in memory will be deleted when it is formatted. Copy all files on the built-in memory to a PC before formatting.
Menu Settings FORMAT SD CARD ERASE ALL DATA Deletes all files on the SD card. Execute this process when disposing of this unit or passing it to another person. Setting Details FILE Deletes all files on the SD card. 1 Tap “MENU”. 2 Tap “Q”. 3 Tap “ERASE ALL DATA”. FILE + Deletes all files on the SD card and MANAGEMENT resets the folder and file numbers to “1”. NO 0 Not available for selection when no SD card is inserted. 0 All data on the card will be deleted when it is formatted.
Names of Parts Rear . . Front 1 SNAPSHOT (Still Image Recording) Button 2 Zoom/Volume Lever 3 4 5 6 1 0 Takes a still image. 0 During shooting: Adjusts the shooting range. 0 During playback (index screen): Moves to the next or previous page. 0 During video playback: Adjusts the volume. Shoe 0 You can attach an audio unit or optional external microphone to this unit. Phantom microphones are not supported. Use a microphone that supports plug-in power. “Attaching an External Microphone” (A p.
Names of Parts Interior . Bottom LCD Monitor 2 USER Button . 1 1 Tripod Mounting Hole “Tripod Mounting” (A p. 17) 0 Turns the power on/off by opening and closing. 0 Enables self-portraits to be taken by rotating the monitor. “Setting the USER Button” (A p. 44) 3 A / B (Video/Still Image) Button 4 i.AUTO Button 5 3D Button 6 7 Remote Sensor 8 ADJ (Adjustment) Button 9 Control Dial 0 Switches between video and still image modes. 0 Switches between Intelligent Auto and Manual modes.
Indications on the LCD monitor 11FOCUS ASSIST Common Recording Indications 1 12TOUCH PRIORITY AE/AF 234 5 678 1/4000 10X F3.4 10:45 3D 9 0 FOCUS LCD a b c . i h g f e d “Using Focus Assist” (A p. 37) 1 2 3 4 5 6 7 8 9 SHUTTER SPEED “Setting Shutter Speed” (A p. 39) Tele Macro (2D mode only) “Taking Close-up Shots” (A p. 43) SCENE SELECT “Scene Selection” (A p. 35) WHITE BALANCE “Setting White Balance” (A p. 41) Date/Time “Capturing Subjects Clearly (TOUCH PRIORITY AE/ AF)” (A p.
Indications on the LCD monitor Video Recording Snapshot 1 234 1 2 5 3 1SEC xvC 0:00:12:34 0:12:34[010:00] 1 2 3 4 5 6 7 8 9 5 [9999] 6 7 . . a 4 6 7 8 9 0 Video Mode “A / B (Video/Still Image) Button” (A p. 122) 3D VIDEO REC FORMAT “3D VIDEO REC FORMAT (3D mode only)” (A p. 92) VIDEO QUALITY “ VIDEO QUALITY ” (A p. 93) TIME-LAPSE RECORDING “Recording at Intervals (TIME-LAPSE RECORDING)” (A p. 50) DIS “Reducing Camera Shake” (A p. 46) x.v.Color (2D mode only) “x.v.
Indications on the LCD monitor Video Playback 1 2 3 Still Image Playback 5 4 2011.10.10 10:00 b 00:01:23 00:12:34 6 7 8 9 0 23 4 5 6 100-0001 2011.10.10 10:00 7 8 9 . . a 1 1 2 3 4 5 6 7 8 9 Video Mode “A / B (Video/Still Image) Button” (A p. 122) VIDEO QUALITY 0 0 is displayed when video was recorded in “24p”. “ VIDEO QUALITY ” (A p. 93) Operation Indicator “Playing Back Videos” (A p. 58) Date/Time “Clock Setting” (A p. 14) Media “ REC MEDIA FOR VIDEO ” (A p.
Troubleshooting Battery Pack Unable to turn on the power when using the battery pack. Recharge the battery pack. “Charging the Battery Pack” (A p. 8) If the terminal of this unit or the battery pack is dirty, wipe it with a cotton swab or something similar. If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed. Be sure to use JVC battery packs. Short usage time even after charging. Battery deterioration occurs when a battery pack is charged repeatedly.
Troubleshooting Playback Sound or video is interrupted. Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction. The same image is displayed for a long time. Replace the SD card. (When the SD card is damaged, difficulty in reading the data occurs. This unit will try to play back as much as possible, but it will stop eventually if the condition persists.) Execute “FORMAT SD CARD” in the “COMMON” menu. (All data will be deleted.) “ FORMAT SD CARD ” (A p.
Troubleshooting Editing/Copying Screen/Image Unable to delete file. The LCD monitor is difficult to see. Files (videos/still images) that are protected cannot be deleted. Release protection before deleting the file. “Protecting Files” (A p. 72) The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight. The LCD monitor appears darker when 3D images are displayed. Change the display to 2D when it is difficult to see, such as when using this unit outdoors.
Troubleshooting Other Problems Error Message? The buttons on the touch screen do not work. CHECK LENS COVER Tap the buttons on the touch screen with your fingers. The buttons may not respond if you touch them with your fingernails or with gloves on. Open the lens cover. The unit operates slowly when switching between video mode and still image mode, or when switching the power on or off. Connect the AC adapter, charge the battery for more than 24 hours and set the clock.
Troubleshooting RECORDING FAILURE FILE QUANTITY LIMIT EXCEEDED Turn off and on this unit again. A Move the files or folders to a PC or other device. (Back up your files.) B Select “FILE + MANAGEMENT NO” in “FORMAT BUILTIN MEM.” or “FORMAT SD CARD” of the “COMMON” menu. (All data on the built-in memory or SD card will be deleted.) PLAYBACK FAILED Remove and re-insert the SD card. “Inserting an SD card” (A p. 10) Remove any dirt from the SD card terminals. Insert the SD card before turning on the power.
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : 0 Be sure to detach the battery pack, AC adapter, and power plug before performing any maintenance. Camcorder 0 Wipe this unit with a dry, soft cloth to remove any dirt. 0 When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent. Caution : 0 Do not use benzene or thinner.
Specifications Camera Item Details Power supply Using AC adapter: DC 11 V Using BN-VF823U/BN-VF823E battery pack: DC 7.2 V Power consumption 0 3D Mode (AVCHD) 4.8 W (when display on LCD monitor is set to “3D” and “MONITOR BRIGHTNESS” is set to “STANDARD”), Rated Current Consumption: 1.0 A 4.5 W (when display on LCD monitor is set to “2D” and “MONITOR BRIGHTNESS” is set to “STANDARD”), Rated Current Consumption: 1.0 A 0 3D Mode (MP4(MVC)) 5.
Specifications Zoom (during video recording) Optical zoom: Up to 5x (during 3D recording), Up to 10x (during 2D recording) Digital zoom: 11 - 200x (during 2D recording) Zoom (during still image recording) Optical zoom: Up to 5x (during 3D recording), Up to 10x (during 2D recording) CONT. SHOOTING SPEED (during still image recording) 0 3D Mode HIGH SPEED: Approx. 12 images/second (Up to 11 images) LOW SPEED: Approx. 1.4 images/second (Maximum) 0 2D Mode HIGH SPEED: Approx.
Specifications o 3D Mode (MP4(MVC)) Item Details Recording/Playback format MP4 standard Video: MPEG-4 MVC (proprietary) /H.264 Audio: AAC 2ch Extension .
Specifications Still Image o 3D Mode Item Details Recording format MPF (compatible with disparity) Extension .MPO Image Size “Approximate Number of Still Images (Unit: Number of Shots)” (A p. 55) o 2D Mode Item Details Recording format JPEG standard Extension .JPG Image Size “Approximate Number of Still Images (Unit: Number of Shots)” (A p. 55) Quality FINE AC Adapter (AP-V20U) Item Details Power supply AC 110 V to 240 V, 50 Hz/60 Hz Output DC 11 V, 1.
Specifications Battery Pack (BN-VF823U/BN-VF823E) Item Details Power voltage 7.2 V Capacity 2190 mAh Dimensions (mm) 30.5 x 46.5 x 52 (1-1/4” x 1-7/8” x 2-1/8”) (W x H x D) Mass Approx. 125 g (0.28 lbs) Battery Charger (AA-VF8) Item Details Power supply AC 110 V to 240 V, 50 Hz/60 Hz Output DC 7.2 V, 1.12 A Allowable operating temperature 10°C to 35°C (50°F to 95°F) Dimensions (mm) 61 x 31 x 100 (2-7/16” x 1-1/4” x 3-15/16”) (W x H x D) Mass Approx. 120 g (0.
Menu Settings Index A ADJ Button ........................................................................... 45 Adjusting Brightness ............................................................ 38 Adjusting the parallax (during playback) .............................. 62 Adjusting the parallax (during recording) ............................. 32 Aperture Priority ................................................................... 40 AUTO FINALIZE ............................................................
© 2011 Victor Company of Japan, Limited C1KW 0711HOH-SW-VM
