- www.carsound.com.
DVD/CD RECEIVER KD-DV7406/KD-DV7405 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0532-005A [A] Cover_KD-DV7406_005A_f.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see pages 26 and 27). How to forcibly eject a disc “Please Eject” appears on the display. WARNINGS: (To prevent accidents and damage) • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. – it may obstruct visibility.
How to use the M MODE and SEL buttons Detaching the control panel If you use M MODE or SEL (select), the display and some controls (such as the number buttons, 4 /¢ buttons, 5/∞ buttons, and the control dial) enter the corresponding control mode. Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner. Avoid touching the connectors. Attaching the control panel To use these controls for original functions, press M MODE again.
CONTENTS INTRODUCTIONS Playable disc type ........................................................................................................................... Preparation ..................................................................................................................................... 6 7 OPERATIONS Basic operations .............................................................................................................................. 8 • Using the control panel..........
Playable disc type Disc type DVD Recording format, file type, etc Playable DVD Video (Region Code: 4) * 1 DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW *2, +R/+RW *3) • DVD Video: UDF bridge • DVD-VR • DivX/MPEG-1/MPEG-2/MP3/ WMA/WAV: ISO 9660 level 1, level 2, Romeo, Joliet DVD Video DVD-VR DivX/MPEG1/MPEG2 MP3/WMA/WAV AAC JPEG/MPEG4 DVD+VR DVD-RAM Dual Disc DVD side CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD *4 Non-DVD side VCD (Video CD) SVCD (Super Video CD) CD-ROM CD-I (CD-I Ready) CD R
Preparation Cancel the display demonstration and set the clock • See also pages 40 and 41. 1 2 Turn on the power. 3 Cancel the display demonstrations Enter the PSM settings. Select “Demo,” then “Off.” Set the clock Select “Clock Hr” (hour), then adjust the hour. Select “Clock Min” (minute), then adjust the minute. Select “24H/12H,” then “24Hours” or “12Hours.” 4 Finish the procedure. Changing the display information and pattern When the power is turned off: Check the current clock time Ex.
Basic operations Using the control panel 1 • TUNER: Select preset station. 2 3 4 5 6 7 8 • DISC/USB/CD-CH: Select title/program/ playlist/folder. • USB-iPod: Enter the main menu [Hold]. • iPod: Enter the main menu/Pause playback/ Confirm selection. • BT-PHONE/BT-AUDIO: Select a registered device. • Turn on the power. • Turn off the power [Hold]. • Attenuate the sound (if the power is on). Display window USB (Universal Serial Bus) input jack Select the sound mode Flip down the control panel.
Using the remote controller (RM-RK252) Installing the battery R03/LR03/AAA Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. If the effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit.
2 5/∞ buttons • TUNER: Selects the preset stations. • DISC: – DVD-Video: Selects the title. – DVD-VR: Selects the program/playlist. – DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included. • USB: – DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included. • CD-CH: Selects the folders if included. • IPOD: – 5 : Enters the main menu (then 5 / ∞ / 4 / ¢ work as menu selecting buttons.) 5 : Returns to the previous menu. ∞ : Confirms the selection. – ∞ : Pauses or resumes playback.
e 3 (play) / 8 (pause) button • DISC/USB/USB-iPod/BT-AUDIO: Starts/pauses playback. r (end call) button • Ends the call. BAND / 7 (stop) buttons • TUNER: Selects the bands. • DISC/USB/USB-iPod/BT-AUDIO: Stops playback. t *2 RETURN button • VCD: Returns to the PBC menu. • USB-iPod: Returns to Control Screen. y *2 MENU button • • • • DVD-Video/DivX: Shows the disc menu. DVD-VR: Shows the Playlist screen. VCD: Resumes PBC playback. USB-iPod: Enters the search mode menu (see page 34).
Listening to the radio 1 Select “TUNER.” 2 Select the bands. 3 Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” lights up on the display, then press it repeatedly. • When receiving an FM stereo broadcast with sufficient signal strength, lights up on the display. When an FM stereo broadcast is hard to receive FM station automatic presetting —SSM (Strong-station Sequential Memory) 1 You can preset up to six stations for each band.
Manual presetting 4 Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Select the preset number you want to store into. Using the number buttons 1 • You can move to the lists of the other FM bands ) or by pressing number button 5 ( ) repeatedly. 6( 2 5 Store the station. 3 Preset number flashes for a while.
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 20 – 23.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or eject the disc.
Operations using the control panel Pressing (or holding) the following buttons allows you to...
After pressing M MODE, press the following buttons to...
Selecting a folder/track on the list (only for MP3/WMA/WAV file) • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 2 5 Change to the selected item. A If File List is selected The list disappears and playback starts. B If Folder List is selected Select “LIST.” 3 Select the list type. 4 Select an item. • If the current folder is selected, File List appears, then repeat steps 4 and 5 A to start playback.
Operations using the remote controller (RM-RK252) Disc / Button Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search *4 (No sound can • Reverse/forward chapter search *1 (No sound can be heard.) be heard.) • Slow motion *2 during pause (No sound can be heard.) * DVD-VR: Reverse slow motion does not work.
Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search *1 Reverse/forward track search *1 • Forward slow motion *2 during pause. (No sound can be heard.) * Reverse slow motion does not work. Reverse/forward track search *1 [Press] Select track (during play or pause) [Hold] Reverse/fast-forward track search *3 (No sound can be heard.
Using menu driven features... (DVD-Video/ DVD-VR) 1 Press TOP M/MENU to enter the menu screen. 2 Press % / fi / @ * / # * to select an item you want to start play. 3 Press ENT (enter) to confirm. * Not applicable for DVD-VR. Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 (twice) Canceling the PBC playback... (VCD) 1 During stop, press DIRECT while holding SHIFT.
On-screen bar Ex.: DVD-Video Information Operation 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode *1 DVD-Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG Video: T. RPT: Track repeat F. RPT: Folder repeat F. RND: Folder random A. RND: All random VCD *2: T. RPT: Track repeat A.
Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. 1 2 Show the control screen. DivX/MPEG Video: Press 7 during play. MP3/WMA/WAV/CD: Automatically appear during play. Select “Folder” column or “Track” column (except for CD). 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed...
Operations using the list screen (DVD-VR/DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. List screen (DivX/MPEG Video/MP3/WMA/ WAV) 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
Listening to the USB device You can connect a USB mass storage class device such as a USB memory, portable HDD, etc. to the unit. • You can also connect an Apple iPod to the USB input jack. For details of the operations, see pages 32 – 36. This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device. All tracks will be played repeatedly until you change the source or detach the USB device.
Dual Zone operations You can enjoy disc playback on the external monitor connected to the VIDEO output terminal and 2nd AUDIO OUT plugs while listening to any source (other than “AM” and “USB”) through the speakers. • You cannot select “AM” or “USB” as the source when Dual Zone is activated. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. For operations, see pages 18 – 23. These operations are possible on the monitor using the remote controller.
Listening to the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
2 Select a number or blank space. 2 Select a device you want to connect. 3 Repeat steps 1 and 2 until you finish 3 • For available devices... 1 Enter the specific PIN code of the device to the unit. Refer to the instructions supplied with the device to check the PIN code. 2 Use the Bluetooth device to connect. Now connection is established and you can use the device through the unit. entering a PIN code. 4 Confirm the entry. “Open...” flashes on the display.
• Select “Delete,” then confirm the selection. Press number button 3 to select “No” or return to the previous screen. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “Auto Connect” on page 47.) Using the Bluetooth cellular phone 1 Select “BT-PHONE.” 2 Enter Bluetooth menu. 3 — Establish the connection with a device, then make a call (or settings using the Bluetooth menu). (See pages 29 and 47.) When a call comes in....
Making a call You can make a call using one of the Dial Menu items. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Select “BT-PHONE.” * Displayed only when your cellular phone is equipped with these functions. – If not displayed, try to transfer the phone book memory of the cellular phone to this unit. (Refer to the instruction manual supplied with your cellular phone.
Using voice command 1 2 2 Select a phone number. You can also enter a new phone number (see also “How to enter phone number” on page 29) to store. 3 Select a preset number to store. “Say...” appears on the display. Speak the name (registered words) you want to call. • You can also use voice command from the Dial Menu. Select “Voice Dial” from the Dial Menu. • If your cellular phone does not support the voice recognition system, “Error” appears on the display.
Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure “Changer” is selected for the external input setting, see page 42. 1 Select “CD-CH.” 2 Select a disc to start playing. [Press] For selecting disc number 1 – 6. [Hold] For selecting disc number 7 – 12.
Listening to the iPod You can connect an Apple iPod using the following cable or adapter: • • • • To: Cable or adapter: Connect to: Listen to the music USB 2.0 cable (supplied for the iPod) USB input jack on the control panel Interface adapter for iPod, KS-PD100 (not supplied) CD changer jack on the rear of the unit Preparation: Make sure “Changer” is selected for the external input setting, see page 42.
[Press] Go to the next or previous track [Hold] Fast-forward or reverse the track during playback [Hold] Enter main menu Operations using the control screen • These operations are possible on the monitor using the remote controller. • Connect your iPod to the USB input jack on the control panel using the USB cable supplied for your iPod, or KS-U19 for watching video file. [Press] Pause/resume playback. 1 Turn on the monitor. Selecting a track from the menu 1 Enter the main menu.
2 Select the desired item. If the selected item has another layer, you will enter the layer. Repeat this step until the desired track is played. • To return to the previous search mode screen, press MENU. • To return to the control screen, press RETURN. To select a playback mode/change the speed of the Audiobooks 1 While control screen is displayed... To select a track from Search Mode 1 Enter Search Mode menu.
4 Confirm the selection. • You can also change the settings from the PSM (Preferred Setting Mode) items. See “AudioBooks” on page 42. Selecting a track from the menu 1 Enter the main menu. 2 Select the desired menu. When connecting with the interface adapter CD changer jack Playlists Ô Artists Ô Albums Ô Songs Ô Genres Ô Composers 3 Confirm the selection. • By holding 4 /¢ , you can fast skip during song search in the main menu. • If a track is selected, playback starts automatically.
The menu selecting mode will be canceled: • If no operations are performed for about: – 5 seconds for iPod connected through KS-PD100. – 15 seconds for iPod connected to the USB input jack. • When you confirm the selection of a track.
Connecting an external component to the AV-IN input jack Portable Video/Audio player * AV mini plug cable (supplied) * Portable Video/Audio player of this pin-allocation can be connected: 1 2 3 4 Audio (R) GND Video Audio (L) Camcorder Video GND Audio (R) Audio (L) iPod, etc. Audio (R) Audio (L) AUX GND EXTERNAL DEVICES EN32-39_KD-DV7406_005A_f.
Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 2 Select “EQ.” 3 Select a preset sound mode. Select “On.” • If “Bypass” is selected, you can listen to the original sound mode recorded. lights up on the display.
• 55Hz: Frequencies higher than 55 Hz are cut off. • 85Hz: Frequencies higher than 85 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] 4 Press number button 1 ( ) to move to another setting level. 4 /¢ : select the quality of LPF. [–12dB/oct or –24dB/oct] Control dial: Turn the control dial to select the subwoofer phase.
General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 41 and 42. 1 Enter the PSM settings. 2 Select a PSM category. 4 Adjust the selected PSM item. 5 Repeat steps 2 – 4 to adjust other PSM items if necessary. 6 Finish the procedure. To display the rest 3 Select a PSM item. By pressing either one of the buttons repeatedly, you can also move to the item of the other categories.
Category Indication DISP (display) CLOCK Clock Hr Hour adjustment *2 *3 *4 *5 Item ( : Initial) Setting, [reference page] 1 – 12AM/ 1 – 12PM (0 – 23) : Initial: 1 (1:00AM), [7]. Clock Min 00 – 59 Minute adjustment : Initial: 00 (1:00AM), [7]. 24H/12H Time display mode • 12Hours • 24Hours : See also page 7 for setting. Scroll *2 Scroll • Once • Auto • Off : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels.
Item Setting, [reference page] ( : Initial) IF Band Intermediate frequency band • Auto • Wide : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. Ext Input *6 External input • Changer • Ext In : To use a JVC CD changer, [31], or an Apple iPod, [32]. : To use any other external component, [36].
Changing the display color Setting the time for dimmer • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 2 Follow steps 1 to 3 on page 40. • In step 2, select “DISP.” • In step 3, select “Dimmer.” You can select your favorite display color for each source (or all sources). • When is shown on the display, you can move back to the previous screen by pressing number button 3 or 6. Setting the display color 1 Select “Time Set.
4 Select a color. Creating your own color—User Color You can create your own colors—“Day Color” or “NightColor.” Pale Ô Aqua Ô Sky Ô Sea Ô Leaves Ô Grass Ô Apple Ô Rose Ô Amber Ô Honey Ô Violet Ô Grape Ô Every *4 Ô User *5 Ô (back to the beginning) 1 Follow steps 1 to 3 on page 40. • In step 2, select “COLOR.” • In step 3, select “Color Set.” 2 Select “Day Color” or “NightColor.” 3 Select a primary color. 4 Adjust the level (00 to 11) of the selected primary color.
Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN. 4 To return to normal screen Select an option. Item Setting MENU LANGUAGE Select the initial disc menu language. Refer also to “Language codes” on page 57. AUDIO LANGUAGE Select the initial audio language. Refer also to “Language codes” on page 57.
Item OTHER Setting OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. • OFF : Cancels. • PCM ONLY : Select for an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or when connecting to a recording device.
Bluetooth settings You can change the settings listed on the right column according to your preference. is shown on the display, you can • When move back to the previous screen by pressing number button 3. 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Enter the Bluetooth menu. 3 Select “Setting.” 4 Select a setting item. *1 Displayed only when a Bluetooth phone is connected. *2 Appears only when a Bluetooth phone is connected and it is compatible with text message (notified through JVC Bluetooth adapter).
Title assignment You can assign titles to 30 station frequencies (FM and AM) using 10 characters (maximum) for each title. • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 To erase the entire title In step 3 on the left column... Select “TUNER.” Available characters Upper case 2 Show the title entry screen. Lower case Numbers and symbols 3 Assign a title. 1 Press number button 4 ( to select a character set.
Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connectors Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction.
More about this unit Basic operations Disc operations Turning on the power General • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts. • In this manual, words “track” and “file” are interchangeably used. • This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc.
Playing DVD-VR files • For details about DVD-VR format and playlist, refer to the instructions supplied with the recording equipment. Playing MP3/WMA/WAV files • The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/ WAV and 64 characters for WMA tag information. • This unit can play back files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter case—upper/lower).
• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. • When connecting a USB mass storage class device, refer also to its instructions. • Connect one USB mass storage class device to the unit at a time. Do not use a USB hub. • This unit is compatible with the USB Full-Speed. • If the connected USB device does not have the correct files, “No File” appears.
• Please Wait... The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). • Reset 08 Check the connection between the adapter and this unit. iPod • Controllable iPod (connected through....
General settings—PSM About sounds reproduced through the rear terminals • “Auto” setting for “Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “Dimmer” setting to any other than “Auto.” • If “LCD Type” is set to “Auto,” the display pattern will change to the “Positive” or “Negative” pattern depending on the “Dimmer” setting.
On-screen guide icons During playback, the following guide icons may appear for a while on the monitor. : Playback : Pause : DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search DVD: The following icons appear at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 46).
Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic OC Occitan SU Sundanese AF Afrikaans FJ Fiji KM Cambodian OM (Afan) Oromo SW Swahili AM Ameharic FO Faroese KN OR Kannada Oriya TA Tamil AR Arabic FY Frisian KO Korean (KOR) PA Panjabi TE Telugu AS Assamese GA Irish KS Kashmiri PL Polish TG Tajik AY Aymara GD Scots Gaelic
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Discs in general FM/AM General Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 3). • “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach it again (see page 4).
USB device DivX/MPEG Video/MP3/WMA/WAV Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 6). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names. • Noise is generated. Skip to another track or change the disc. • Tracks cannot play back as you have intended Playback order is determined when files are recorded. them to play.
Bluetooth ® USB device Symptom Remedy/Cause • “No File” flashes on the display. • “No USB” appears on the display. Connect a USB device that contains tracks encoded in an appropriate format. • “Not Support” appears on the display and track skips. The track is unplayable. • “Read failed” appears on the display. The connected USB device may be malfunctioning, or may not have been formatted correctly. The files included in the USB device are corrupted. • Correct characters are not displayed (e.g.
Bluetooth ® CD changer Symptom Remedy/Cause • The sound is interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit. • When the sound is not yet restored: Connect the player again. • The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). (Operations depend on the connected audio player.
TUNER SECTION AUDIO AMPLIFIER SECTION Specifications Maximum Power Output: Continuous Power Output (RMS): Front/Rear: Frequency Range: FM: AM: Usable Sensitivity: 50 dB Quieting Sensitivity: Alternate Channel Selectivity (400 kHz): Frequency Response: Stereo Separation: Sensitivity: Selectivity: 50 W per channel 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range/Signal-to-Noise Ratio: 96 dB/98 dB Wow and Flutter: Less than measurable limit DivX/MPEG Video: Max.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN © 2008 Victor Company of Japan, Limited Rear_KD-DV7406_005A_f.
