User's Manual

INTRODUCTION

Basic operations — Monitor panel/touch panel

• Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

Change the sources.

• ☞ page 9.

Remote sensor

Adjust the volume.

Reset the unit.

• Use only when the internal system malfunctions.

Display <AV Menu>.

• ☞ page 53.

Display and erase the Short Cut windows.

Available functions vary among the sources. For details, see each source

operation section.

Change the display information.

• [OPEN]: Open the monitor panel.

• [EJECT]: Eject the disc.

• [CLOSE]: Close the monitor panel.

• [TILT +/–]: Tilt the monitor panel.

• [Exit]: Erase this screen.

• Shaded icons cannot be used at that time.

• For details on the touch panel operations,

see each source operation sections.

Display <Source Menu>.

• ☞ pages 9 and 27.

• Display the <Open/Tilt> screen

• Eject the disc and display the <Open/Tilt>

screen [Hold].

• Close the monitor panel when the <Open/Tilt>

screen is displayed.

Display <AV Menu>.

• ☞ page 53.

EN02-07_KW-AVX900A_f.indd 5EN02-07_KW-AVX900A_f.indd 5 07.3.13 11:34:12 AM07.3.13 11:34:12 AM