TM-H1900G [TM-H1900G/E/TM-H1900G/U] OPERATING INSTRUCTIONS COLOR VIDEO MONITOR FRANÇAIS INSTRUCTIONS DEUTSCH TM-H1900G TM-H1700G ENGLISH BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR VIDÉO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR !"#$%&'(&) ITALIANO For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself. WARNING : THIS APPARATUS MUST BE EARTHED. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB(A) according to ISO 7779.
CONTROLS AND FEATURES FRONT VIEW REAR VIEW VIDEO A 10 50C CHROMA CONTRAST PHASE VOLUME/SELECT MENU UNDER SCAN A 12 POWER B IN BRIGHT OUT INPUT SELECT REMOTE 11 VIDEO B 13 CHROMA CONTRAST TM-H1900G PHASE BRIGHT VOLUME/SELECT MENU UNDER SCAN A B POWER INPUT SELECT 1 2 3 4 6 5 7 8 IN 9 OUT VIDEO A IN OUT VIDEO B IN (Front view of TM-H1900G shown) IN 14 IN Y/C OUT AUDIO A IN No.
(cont’d) REAR VIEW TM-H1900G 1-4 CONTROLS AND FEATURES HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION STATUS indication (PAL or NTSC) 1. Press the main power switch to turn on the power. 2. Press the POWER switch to turn on the power. 19 REMOTE POWER For U.S.A. and Canada VIDEO A To AC outlet (230 V AC, 50 Hz/60 Hz) IN OUT VIDEO B IN 19 IN OUT Y/C OUT AUDIO A IN For Europe 3. Press the INPUT SELECT buttons to choose input.
HOW TO HANDLE BASIC OPERATIONS (cont’d) VIDEO SIGNAL CONTROLS HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
DISPLAY AND SELECTIONS IN THE MODE (SETTING) • PICTURE SUB ADJ. • H. POSITION • V. POSITION • WHITE BALANCE • CONTROL LOCK • STATUS DISPLAY • REMOTE SYSTEM • INPUT REMOTE 1 Notes: ● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/ 2 C)) selected with the input select buttons on the front panel.
BASIC CONNECTION EXAMPLE HOW TO INITIALIZE THE SETTING Notes: SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected.
(cont’d) ABOUT EXTERNAL CONTROL VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) This monitor is provided with an external control terminal. MAKE (make contact) or TRIG. (trigger) system can be selected by the setting of REMOTE SYSTEM in the . MAKE (make contact system) : The function is controlled by short-circuiting or disconnecting each control terminal with pin 15 (GND). TRIG.
TM-H1900G SPECIFICATIONS MODEL TM-H1900G TM-H1700G Type Color video monitor Color system PAL, NTSC (3.58) 49 cm (19") measured diagonally, 90° deflection, in-line gun, trio-dot type (phosphor dot-trio pitch 0.27 mm) Effective screen size 44 cm (17") measured diagonally, 90° deflection, in-line gun, trio-dot type (phosphor dot-trio pitch 0.27 mm) Width 365.8 mm (14-5/8") Height 274.3 mm (10-7/8") Diagonal 457.2 mm (18") Width Height Diagonal 327.5 mm (12-7/8") 246.2 mm (9-5/8") 407.
TM-H1900G SPECIFICATIONS (cont’d) Dimensions [TM-H1900G] Unit : mm (inch) < Side View > < Front View > 496 (19-5/8") 485 (19-1/8") 440 (17-3/8") 1.5 (1/16") VOLUME/SELECT MENU UNDER SCAN A BRIGHT POWER B INPUT SELECT 380.4 (15") 95.7 (3-7/8") 336 (13-1/4") 5 (1/4") PHASE 5 (1/4") CHROMA CONTRAST TM-H1900G 195.5 (7-3/4") 284.3 (11-1/4")* 375 (14-7/8") 375 (14-7/8")* ø 20 (7/8") * Asterisks (*) are used to indicate front panel dimensions.
TM-H1900G Y/C (Mini DIN 4 pin) terminal specification 4 Pin No. 1 3 OUT 2 4 1 3 Y/C Signal 1 GND (Y) 2 GND (C) 3 Y 4 C ENGLISH 2 IN 19 No.
TM-H1900CG/TM-H1700CG COLOR VIDEO MONITOR VICTOR COMPANY OF JAPAN, LIMITED © 2002 VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand 0402-Y-U-JMT VP0206 DP3051