Instruction Manual

44 EN
INDEX LCD monitor/Viewfinder
10 : 2425 . 12 . 97
MERRY CHR ISTMAS
TAPE END
– 05
MWB
DISP.
REC
SEPIA
LENS COVER
FADE
18MIN
T30
1MIN
1/2S
INDEX
PAUSE
7
8
9
1
*
5
*
6
$
*
^
%
&
*
(
)
0
@
#
!
32 4
w
q
LCD monitor/Viewfinder Indications
1
*
Cassette Warning/Remaining
Tape Time .......................................... Z pg. 11
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette (
) Warning blinks.
Otherwise, the Remaining Tape Time is displayed.
2, 8 PROGRAM AE Indicator ................Z pg. 16
Displayed at 2 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 8.
3 Program Manager Function
Indication .......................................... Z pg. 20
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
4 Lens Cover Warning .......................... Z pg. 11
5
*
Tape Length Display .......................... Z pg. 8
6 Zoom Level Indicator ........................ Z pg. 14
7 Recording Indicator ........................... Z pg. 10
9 Fade-Standby Indicator .......................Z pg. 20
0 Interval Time/Recording
Time Indicator ................................... Z pg. 26
! Record-Standby Mode Indicator .........Z pg. 10
@ Instant Title Display ........................... Z pg. 21
# Date/Time Character Display ..............Z pg. 22
$
*
Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “ ”.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares —
— does not necessarily mean
that the battery pack is fully charged.)
% Focus Indicator .................................. Z pg. 18
^ Exposure Level Indicator..................... Z pg. 17
& White Balance Mode Indicator ........... Z pg. 23
* Menu Setting Change Indicator .......... Z pg. 24
( Index Code Marking .......................... Z pg. 37
) Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing
the clock battery ................................ Z pg. 6
q Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
w Tape End Display ............................... Z pg. 11
Appears when the end of the tape is reached
during playback, recording or fast-forward.
* : During recording, pressing DISPLAY lets you
remove indications marked with * from the
screen.