Operation Manual

EN
RU
UK
15
• To get customer support and to register the software, you need the following product key
(CD-Key):
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
• Power2Go 5.5 Lite does not support conversion of audio files to MP3 format.
• When the “Enter Activation Key” screen appears while using Power2Go 5.5 Lite, close the
screen without entering the activation key.
o Removing USB Cable from PC
1. Carry out removing of hardware on the PC.
2. Remove the USB Cable.
..........................................................................................................................................
Computers That Can Be Used
CyberLink Power2Go 5.5 Lite can be used on computers satisfying the following
conditions.
o Operating system:
Windows XP Home Edition (pre-installed)
Windows XP Professional (pre-installed)
Windows Vista Home Basic (32-bit edition, pre-installed)
Windows Vista Home Premium (32-bit edition, pre-installed)
o Connector:
USB 2.0 connector
o CPU:
Intel Pentium III, at least 800 MHz
(Intel Pentium 4, at least 2 GHz recommended)
o RAM:
At least 128 MB (at least 256 MB recommended)
o Free hard disk space:
At least 50 MB for installation
At least 5 GB recommended for creating DVDs
o Display:
Must be capable of displaying 800 c 600 dots
..........................................................................................................................................
Installing CyberLink Power2Go 5.5 Lite
A
Insert the provided CD-ROM in the PC.
• The “Choose Setup Language” screen appears.
B
Confirm the language and then click
“OK”.
• The installation screen appears.
z Do not play the provided CD-ROM in an audio player. It is not an audio CD. Playing
this CD-ROM in an audio player will result in a loud high noise. It may also damage
the circuit and speaker.
Caution
CU-VD3E_001B_EN.book Page 15 Monday, February 11, 2008 10:48 AM