HD MEMORY CAMERA Detailed User Guide GZ-EX210/GZEX215/GZ-EX250 LYT2431-037A
Table of Contents Beginner’s Guide ........................................................... 5 Charging .................................................................................. 5 Recording ................................................................................ 5 Playback .................................................................................. 5 Shooting Tips ........................................................................... 5 Holiday Season/Christmas .................
Capturing a Still Image in the Video During Playback .......... 125 Combining Videos Recorded by Seamless Recording (GZEX250) ............................................................................. 125 Capturing a Required Part in the Video (TRIMMING) .......... 126 Capturing Videos for Uploading to YouTube ........................ 127 Creating Playlists from the Recorded Videos ....................... 129 Creating Playlists with Selected Files ...............................
Rear ..................................................................................... 200 Bottom ................................................................................. 201 Interior ................................................................................. 201 LCD Monitor ........................................................................ 202 Indications on the LCD monitor Common Recording Indications .......................................... 203 Video Recording ................
Beginner’s Guide o [Getting Ready] Charging 0 Recording 0 Refer to the operating instructions found in the animation on the Detailed User Guide. Playback 0 A Open your feet to the width of your shoulders. B Extend your right hand and hold the camcorder over your head. C Hold the LCD monitor with your left hand and adjust the angle accordingly. Refer to the operating instructions found in the animation on the Detailed User Guide.
Useful Shooting Techniques Holiday Season/Christmas Recording the Christmas Party Record the happy Christmas celebration with your family! . Photo by 101st CAB, Wings of Destiny Creative Commons Attribution-No Derivative Works 3.0 Decorating the Tree and Preparing the Dinner The decoration of tree and preparation of dinner are part of the joy of Christmas. Be sure to record these happy family times! o Decorating the tree . A tree is the most important thing to bring out the mood of Christmas.
Useful Shooting Techniques Wedding Create an awesome wedding video for the bride and groom! Recording the Expressions and Comments of Guests o Setting the shot from eye level to chest level . Discussing and Planning Before the Event Before the day of the wedding reception, it is important to discuss with the bride and groom about various details such as the order of the ceremony and whether there are any entertainment programs or change of clothes.
Useful Shooting Techniques Advanced Operation with Two Camcorders If video-editing is to be done, record using two camcorders so that a video with varying scenes can be created. You can try asking a close friend who has a camcorder at home. Set the borrowed camcorder on a tripod to focus on taking close-up shots of the bride and groom. In this way, the other camcorder can be moved around to record other scenes, enabling an interesting video with changing scenes to be created through editing and compilation.
Useful Shooting Techniques o Battery Charger Using Pan at the Places of Interest Tourists spots with beautiful scenery or historical sites are places that you would certainly want to record. To capture the magnificence of a scene which cannot be fitted into a single frame, try the panning technique. Refer to “Shooting Tips” found in the “Beginner’s Guide” on this website on how to use panning effectively.
Useful Shooting Techniques Amusement Park Inducing Responses by Calling Out Take more shots of the smiling faces of everyone in the family! . . Taking Videos or Still Images According to the Attraction You may choose to take videos all the time. However, you may want to take some still images too. The following section explains the scenarios suitable for taking videos or still images.
Useful Shooting Techniques Advanced Operation with Backlight Compensation When the subject’s face is in backlight or when the expression cannot be seen clearly, the Intelligent Auto function of this unit automatically increases its brightness for recording. If Intelligent Auto fails to function as expected or if the brightness correction is insufficient, you can increase the brightness by using backlight compensation in the Manual mode. “Setting Details” (A p. 86) o .
Using Wi-Fi Wi-Fi Capabilities This unit is equipped with Wi-Fi function. You can do the following using a smartphone or computer via wireless connection. Name of Function Capability Direct Monitoring You can check the image on the camera via direct 1-to-1 connection (Wi-Fi Direct) with a smartphone (or computer), without the need for an access point (wireless LAN router). Recording of videos and still images may be performed while monitoring.
Using Wi-Fi Operating Environment To use the smartphone application “Everio sync.”, it is necessary to meet the following requirements. Android Smartphone A OS: Android2.1 or higher (This unit is not guaranteed to operate with all models.) B Supports GPS function (for GPS recording) C Able to connect to the internet or “Android Market™” (required for software installation) Precautions on Using Wi-Fi Cautions on Wi-Fi Function 0 0 0 0 0 iPhone/iPad A OS: iOS4.3.
Using Wi-Fi o Do not use the Wi-Fi function outside the country of purchase. Depending on the country, there may be restrictions on the use of radio waves and any violations could be punishable by law. Exporting/Bringing the Unit Overseas Permission from the U.S. government may be required when bringing the unit to an export controlled country set by the U.S. government (such as Cuba, Iraq, North Korea, Iran, Rwanda, and Syria. As of November, 2011). For more information, consult the U.S.
Using Wi-Fi DIRECT MONITORING CONNECTING SSID:******************************** PASS:******************************** QUIT MENU WPS ******************************** . . 3 0 Tap “WPS”. (Operation on this camera) 4 DIRECT MONITORING For details on connecting your smartphone (or computer) to a Wi-Fi network, please refer to the instruction manual of the phone terminal in use. A connection is established and Q appears on the camera’s screen.
Using Wi-Fi Operation Method DIRECT MONITORING o Smartphone (Android / iPhone) CURRENTLY BEING CONTROLLED BY REMOTE Memo : It is necessary to install the application on the smartphone. “Installing Smartphone Applications” (A p. 43) 0 1 QUIT Start “Everio Sync.” on the smartphone after setting direct monitoring. CAMERA OPERATION CAMERA NETWORK INFO. . 0 The URL for the computer to connect to appears. 2 Check the URL. (Adds network information screen.
Using Wi-Fi Recording the Location Information DIRECT MONITORING You can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone. CONNECTING SSID:******************************** PASS:******************************** QUIT GPS WPS ******************************** . 4 Activate WPS on the smartphone within 2 minutes. (Operation on the smartphone) 0 0 To activate WPS, refer to the instruction manual of the device in use.
Using Wi-Fi Operation Method 1 Tap “CAMERA OPERATION” after setting direct monitoring. (Operation on this camera) DIRECT MONITORING CURRENTLY BEING CONTROLLED BY REMOTE QUIT Image Monitoring via an Access Point at Home (OUTSIDE MONITORING) You can check the image on the camera with a smartphone (or computer) via an access point at home using wireless LAN router. 0 Recording of videos and still images may be performed while monitoring. CAMERA OPERATION CAMERA NETWORK INFO. .
Using Wi-Fi Operation Method o Smartphone (Android / iPhone) Memo : It is necessary to install the application on the smartphone. “Installing Smartphone Applications” (A p. 43) 0 1 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY . 0 2 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) . 0 MENU . 3 Tap “OUTSIDE MONITORING”. (Operation on this camera) 6 If the camera cannot be found, enter the URL (LAN) displayed in “CAMERA NETWORK INFO.
Using Wi-Fi Image Monitoring via the Internet (OUTSIDE MONITORING) Wi-Fi OUTSIDE MONITORING You can check the image on the camera via internet connection with a smartphone (or computer). *Connection to the internet is established via a wireless LAN router. 0 Recording of videos and still images may be performed while monitoring. . 4 Tap “CAMERA NETWORK INFO.”. (Operation on this camera) OUTSIDE MONITORING CURRENTLY BEING CONTROLLED BY REMOTE QUIT CAMERA NETWORK INFO. . .
Using Wi-Fi What You Need Operation Method Smartphone or Windows computer Wireless LAN router that supports UPnP (use a product that has a Wi-Fi certification logo) To check whether UPnP is supported, please refer to the instruction manual of the wireless LAN router in use. 0 Internet connection with an obtainable global IP address o Smartphone (Android / iPhone) 0 0 Memo : 0 Memo : 0 It is necessary to install the application on the smartphone. “Installing Smartphone Applications” (A p.
Using Wi-Fi o Computer (Windows 7) 1 Tap “MENU”. (Operation on this camera) . 7 Enter the confirmed URL (WAN) directly. 8 Log in with your username and password. (if authentication cannot be achieved) The username is “everio” and the default password is “0000”. “Changing the Settings” (A p. 27) 0 MENU REC ≪PLAY . 0 2 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) Using smartphone applications “Using Smartphone Applications” (A p.
Using Wi-Fi 0 To end operations, tap “STOP”. Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING) A still image is automatically captured and sent via e-mail when faces or movements are detected by the camera. Children may, for example, send still images to their parents via the camera to inform them of the happenings at home. . Memo : The size of the still image that is captured in “DETECT/MAIL SETTING” is 640 x 360.
Using Wi-Fi Operation Method Set up the camera at the recording location. 2 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY 1 . 0 2 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) MENU REC ≪PLAY . 0 3 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) MENU . 3 Tap “DETECT/MAIL SETTING”. (Operation on this camera) Wi-Fi MENU . 4 DETECT/MAIL SETTING Tap “DETECT/MAIL”.
Using Wi-Fi Record and Send Videos via E-mail (VIDEO MAIL ATTN.) Videos of up to 15 seconds can be recorded and sent via e-mail. With this function, short videos can be delivered easily even on a daily basis, such as to show the growing up of small children to their distant grandparents. Necessary Settings To send e-mails, the following settings are required. *The above settings are not necessary if they have already been set for other functions.
Using Wi-Fi Changing the Settings Operation Method 1 To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone (or computer). 0 Registering the access points to connect (wireless LAN router) “Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 35) Tap “MENU”. (Operation on this camera) 0 Obtaining a dynamic DNS account “Obtaining a Dynamic DNS (DDNS) Account” (A p. 29) MENU REC ≪PLAY 2 The shortcut menu appears.
Using Wi-Fi Menu Settings Setting OUT MONITORING SET Details Configures various settings related to outside monitoring. 0 PASSWORD (Default: “0000”) Selects the password to access the camera. “Setting the Password (OUT MONITORING SET)” (A p. 28) UPnP (Default: “ON”) Sets the UPnP of the camera. ・OFF: Disables UPnP. ・ON: Enables UPnP. “Setting the UPnP of this Camera (OUT MONITORING SET)” (A p. 28) 0 DDNS SETTING Configures various settings related to DDNS.
Using Wi-Fi Setting the Password (OUT MONITORING SET) Setting the UPnP of this Camera (OUT MONITORING SET) Sets the password to access the camera. (Not more than 8 characters) Sets the UPnP of the camera. 1 1 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY Tap “MENU”. (Operation on this camera) 0 2 . The shortcut menu appears. 0 2 Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu.
Using Wi-Fi Obtaining a Dynamic DNS (DDNS) Account By obtaining a dynamic DNS account, this unit may be used on the web as usual even if the IP address changes when it is connected to the internet. 0 Only the JVC dynamic DNS service can be set on this camera. To obtain (register) an account, perform the following steps. 1 Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET) Sets the dynamic DNS information of the obtained account on the camera. 1 Tap “MENU”.
Using Wi-Fi 6 Enter the DDNS settings (username/password). (Operation on this camera) Setting the Sender’s E-mail Address Sets the address to be used for sending e-mails on the camera. Memo : USERNAME 0 DELETE 1 SET By using Gmail as the sender’s mail address, some of the settings can be omitted. Use of Gmail is recommended for users who have a Gmail account. Tap “MENU”. (Operation on this camera) CANCEL . 0 0 0 0 0 0 0 Tap “USERNAME” or “PASSWORD” to display the respective input screens.
Using Wi-Fi SENDER'S EMAIL 0 0 0 0 0 DELETE SET CANCEL 8 Tap on the on-screen keyboard to enter characters. The character changes with every tap. Tap “DELETE” to delete a character. Tap “CANCEL” to exit. Tap E or F to move one space to the left or right. After setting, tap “SET”. Tap “AUTHENTICATE METHOD” (not necessary in the case of Gmail) . 0 0 0 0 0 0 6 MAIL SETTING Tap on the on-screen keyboard to enter characters. The character changes with every tap. Tap “DELETE” to delete a character.
Using Wi-Fi PASSWORD DELETE SET CANCEL . 0 0 0 0 0 0 Tap on the on-screen keyboard to enter characters. The character changes with every tap. Tap “DELETE” to delete a character. Tap “CANCEL” to exit. Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number. Tap E or F to move one space to the left or right. After setting, tap “SET”. 11 After setting all the necessary items, tap “SET”. SENDER'S EMAIL Enter the sender’s e-mail address.
Using Wi-Fi Registering the Recipient’s E-mail Address 6 Registers the e-mail addresses of recipients on the camera. 1 Tap “ADD”. (Operation on this camera) Tap “MENU”. (Operation on this camera) RECIPIENT'S EMAIL ADD . MENU REC ≪PLAY 7 Enter the recipient’s e-mail address. RECIPIENT'S EMAIL . 0 2 The shortcut menu appears. DELETE Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) SET CANCEL . 0 0 0 0 MENU . 3 Tap “NETWORK SETTINGS”.
Using Wi-Fi Setting the Detection Method of this Camera (DETECT/MAIL SETTING) Setting the Detection Interval of this Camera (DETECT/MAIL SETTING) Sets the detection method to start recording. Sets the time period to enable detection again after the previous one. 1 1 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY Tap “MENU”. (Operation on this camera) 0 2 . The shortcut menu appears. 0 2 Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) The shortcut menu appears.
Using Wi-Fi Setting Self Recording on this Camera (DETECT/MAIL SETTING) Registering the Access Points to Connect (“ACCESS POINTS”) Sets whether to record videos on this camera during detection. There are 4 ways to register the access points (wireless LAN router) for connection. 1 Tap “MENU”. (Operation on this camera) This is the easiest way of registration.
Using Wi-Fi 4 o Search and Register Tap “ACCESS POINTS”. (Operation on this camera) 1 NETWORK SETTINGS Tap “MENU”. (Operation on this camera) ACCESS POINTS . 5 MENU REC ≪PLAY Tap “ADD”. (Operation on this camera) . 0 ACCESS POINTS 2 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) ADD . 6 Tap “EZ REGISTRATION WPS”. (Operation on this camera) MENU . 3 ADD EZ REGISTRATION WPS Tap “NETWORK SETTINGS”. (Operation on this camera) Wi-Fi .
Using Wi-Fi 6 o Manual Registration Tap “SEARCH”. (Operation on this camera) 1 ADD Tap “MENU”. (Operation on this camera) SEARCH . 0 7 Tap the name (SSID) of the desired access point from the list of search results. (Operation on this camera) MENU REC ≪PLAY The search results appear on the camera’s screen. . 0 2 The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) SEARCH SEARCH AGAIN MENU . . 8 Enter the password.
Using Wi-Fi 7 Enter the name (SSID) of the access point (wireless LAN router) and tap “SET”. (Operation on this camera) o WPS PIN Registration 1 Tap “MENU”. (Operation on this camera) SSID DELETE SET CANCEL MENU REC ≪PLAY . 0 0 0 0 0 8 Tap on the on-screen keyboard to enter characters. The character changes with every tap. Tap “DELETE” to delete a character. Tap “CANCEL” to exit. Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.
Using Wi-Fi 6 3 Tap “WPS PIN”. (Operation on this camera) Tap “NETWORK SETTINGS”. (Operation on this camera) ADD Wi-Fi WPS PIN NETWORK SETTINGS . 0 7 The PIN code appears. 4 Enter the PIN code displayed on the camera to the access point (wireless LAN router). 0 8 . Tap “ACCESS POINTS”. (Operation on this camera) NETWORK SETTINGS For details on how to enter the PIN code, refer to the instruction manual of the device in use. ACCESS POINTS Tap “START”.
Using Wi-Fi PASSWORD Setting the Password (DIRECT MONITORING) Sets the password for direct monitoring. (8 to 32 characters) 1 DELETE Tap “MENU”. (Operation on this camera) SET CANCEL . 0 MENU REC ≪PLAY . 0 2 The shortcut menu appears. 0 0 Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) MENU . 3 Tap “NETWORK SETTINGS”. (Operation on this camera) Wi-Fi NETWORK SETTINGS . 4 Tap “Wi-Fi DIRECT SETTING”. (Operation on this camera) NETWORK SETTINGS Wi-Fi DIRECT SETTING .
Using Wi-Fi Setting the Enforced Group Owner (DIRECT MONITORING) Checking the MAC Address of this Camera Sets whether to enforce authorization of the group owner. Displays the MAC address of the camera. 1 1 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY Tap “MENU”. (Operation on this camera) 0 2 . The shortcut menu appears. 0 2 Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu.
Using Wi-Fi Protecting the Network Settings with a Password Initializing the Network Settings Sets a password to lock and protect the network settings. Returns the network settings to their default values. 1 1 Tap “MENU”. (Operation on this camera) MENU REC ≪PLAY Tap “MENU”. (Operation on this camera) 0 2 . The shortcut menu appears. 0 2 Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera) The shortcut menu appears. Tap “Wi-Fi” (Q) in the shortcut menu.
Using Wi-Fi Using Smartphone Applications By using smartphone applications, you can connect to the camera and make use of the Wi-Fi function. Installing Smartphone Applications Indications on the Screen Android Smartphone o Recording Screen Record-Standby Recording in Progress o Android Smartphone 1 Tap [Market] on the application list. 2 Search for the “Everio Sync.” application. 3 Tap on the “Everio Sync.” application.
Using Wi-Fi Caution : 0 “Everio Sync.” for iPhone/iPad cannot be used when the iPhone/iPad is connected to the mobile phone network. To make use of this feature, connect to the camera or an access point via Wi-Fi. o Video Index Screen To Recording Screen To Still Image Index Screen . o Still Image Index Screen . 3 Tap on the thumbnail to transfer. To Recording Screen To Video Index Screen . 0 To exit the application, press the “Home” button.
Using Wi-Fi . . 0 0 0 0 5 The start point and length of video are displayed in the unit set in “VID LENGTH TO TRANS”. (Display shown is when set to 30 seconds) To have a more detailed setting for the start point and length of video, tap “MANUAL”. A progress status is displayed on the smartphone during preparation for the transfer and while transferring. To cancel the transfer, tap “CANCEL”. Set the start point and length of video, then tap “TRANSFER”.
Using Wi-Fi . 3 . 0 Tap V. (Android only) 0 5 A progress status is displayed on the smartphone during preparation for the transfer and while transferring. To cancel the transfer, tap “CANCEL”. After transferring is complete, tap “OK”. . 4 Tap on the thumbnail to transfer. . 0 0 46 To play back the still image, tap “CHECK”. (Android only) To upload (share) the still image, tap “SHARE”. (Android only) Tap the desired service to start the uploading process.
Using Wi-Fi Changing the Settings You can change the settings of the smartphone applications. o Android Smartphone 1 Press the MENU button. . Item . 2 Details MONITORING Turns monitoring of the recording screen on/ off. LOC INFO TRANS INT Sets the time interval for sending location information. VID LENGTH TO TRANS Sets the length of video to transfer. URL Enter the URL when using outside monitoring. HTTP AUTHORIZATION Enter the required username and password when using outside monitoring.
Using Wi-Fi o iPhone 1 Item Tap “Q”. MONITORING Turns monitoring of the recording screen on/ off. LOC INFO TRANS INT Sets the time interval for sending location information. CHANGE BACKGROUND COLOR Changes the background. LENGTH OF VIDEO Sets the length of video to transfer. URL Enter the URL when using outside monitoring. USERNAME Enter the required username when using outside monitoring. The username is “everio”. (fixed) PASSWORD Enter the required password when using outside monitoring.
Using Wi-Fi Using the Wi-Fi Function from a Web Browser You can connect to the camera and make use of the Wi-Fi function from the web browser of a computer. 0 Indications on the screen “Indications on the Screen” (A p. 49) 0 Changing the settings “Making Camera Settings from a Web Browser” (A p.
Using Wi-Fi o Video Index Screen To Recording Screen Page Forward/Back . 0 To download a video, click on the thumbnail. o Still Image Index Screen . 0 To download a still image, click on the thumbnail. o DETECT/MAIL SETTING Screen Notification mail settings such as detection method and recipient’s e-mail address can be changed even when the camera is out of reach. Registered e-mail addresses of recipients in Everio (Up to 8) *A check mark appears on the selected address.
Using Wi-Fi Making Camera Settings from a Web Browser SET FROM WEB BROWSER You can change the camera settings from a web browser. 1 CHANGE SETTING BY CONNECTING TO THE FOLLOWING URL FROM YOUR WEB BROWSER http://***.***.***.***:*****/ Tap “MENU”. (Operation on this camera) QUIT . 0 MENU REC ≪PLAY 2 You can change the Wi-Fi function of the camera from a web browser. “Adding/Changing/Deleting an Access Point” (A p. 52) “ OUT MONITORING SET ” (A p. 53) “ Wi-Fi DIRECT SETTING ” (A p.
Using Wi-Fi Adding/Changing/Deleting an Access Point To search and add “ACCESS POINTS” 1 Click “ACCESS POINTS”. . 2 Click “ADD”. . 2 Click “SEARCH”. . 3 Enter “SSID”, “TYPE OF SECURITY”, and “PASSWORD”, and click “REG.”. . 3 Click on the access point you want to add. . . 0 4 Click “SEARCH AGAIN” to perform search for an access point again. Enter the password, and click “REG.”. . 0 4 To configure the LAN settings manually, set “DHCP” to OFF, and enter the necessary information manually.
Using Wi-Fi . . 3 After changes are made, click “REG.”. Wi-Fi DIRECT SETTING To change “Wi-Fi DIRECT SETTING” 1 Click “Wi-Fi DIRECT SETTING”. . . 2 After changes are made, click “REG.”. . 0 4 Click “DELETE” on this screen to delete the registered access point. Click “OK”. . 0 3 Click “DELETE” on this screen to delete the registered access point. Click “OK”. . OUT MONITORING SET To change “OUT MONITORING SET” 1 Click “OUT MONITORING SET”. .
Using Wi-Fi . . 3 0 Enter the necessary information, and click “REG.”. 5 Select the checkbox for “VIDEO MAIL” and “DETECT/MAIL” to set the address as the recipient. Click “OK”. . 4 Click “OK”. . To change or delete a “RECIPIENT'S EMAIL” 1 Click “MAIL SETTING”. . To add a “RECIPIENT'S EMAIL” 1 Click “MAIL SETTING”. . 2 Click “RECIPIENT'S EMAIL”. . 2 Click “RECIPIENT'S EMAIL”. . 3 Click on the mail address you want to change. . 3 Click “ADD”. .
Using Wi-Fi . To change “VIDEO MAIL SETTINGS” settings 1 . 3 After changes are made, click “REG.”. Click “MAIL SETTING”. . 4 Click “OK”. . 2 Click “VIDEO MAIL SETTINGS”. . . 3 After changes are made, click “REG.”. . 4 Click “OK”. . To change “DETECT/MAIL SETTING” 1 Click “MAIL SETTING”. . 2 Click “DETECT/MAIL SETTING”.
Using Wi-Fi Troubleshooting Direct Monitoring Trouble Action Unable to connect to camera. (URL required) 0 0 0 0 Check whether the Wi-Fi connection is established successfully. Check whether Wi-Fi is connected to “DIRECT-**EVERIO”. Check whether the smartphone (or computer) is connected to the camera. Try again after powering off and on the camera and the terminal (smartphone or computer). Operations from this unit do not work when direct monitoring is in use.
Using Wi-Fi Unsure of password for the access point (wireless LAN router). Refer to the instruction manual of the access point (wireless LAN router) in use. Unable to connect via Wi-Fi Protected Setup (WPS). 0 0 Simple connection methods other than WPS are not supported. Conduct a search for the access point to connect. Turn off the power of the camera, then try again. Outside Monitoring (Connection in the House) Trouble Unable to connect to camera.
Using Wi-Fi Outside Monitoring (Connection from the Internet) Trouble Action Unsure of URL to access from a web browser. 0 After outside monitoring is started, tap “CAMERA NETWORK INFO.” shown on the camera’s screen. Enter the address as shown in “URL(WAN):” into the web browser to access it. The URL (WAN) does not appear in the network information. 0 The URL (WAN) will not appear if dynamic DNS is not set on the camera. To set dynamic DNS, perform the following steps. 1.
Using Wi-Fi E-mail (Notification Mail, Video Mail) Trouble Unable to send e-mails. Action 0 0 0 0 0 Check that the settings of the e-mail server are correct. Check that the settings of the sender’s e-mail address are correct. Check that the username and password are correct. If you are using an e-mail service that is not from your provider, it may be necessary to change the SMTP settings.
Using Wi-Fi o When Using Web Browser Item Details Operating Environment Windows 7: Internet Explorer 9 or a later version, and Windows Media Player 12 or a later version are installed 0 For Full HD, make use of a computer with the following system requirements. - CPU: Intel Core 2 Duo 2 GHz or higher - Memory: 2 GB or higher 0 A network environment with the following line speed is recommended for both the camera sending the data and the PC receiving the data. - MotionJPEG: approx. 1.
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description AC Adapter AC-V11U 0 Connects to this unit to charge the battery pack. It can also be used when recording or playing back videos indoors. . Battery Pack BN-VG114U 0 Attaches to this unit to supply power. . AV Cable 0 Connects this unit to a TV to play back recorded images on the TV. .
Getting Started Attaching the Core Filter Attach a core filter to the end of the AV cord and USB cable that is connected to this unit. The core filter reduces interference when this unit is connected to other devices. Release the stopper 3 cm (1-3/16”) To be connected to this unit .
Getting Started Charging the Battery Pack Charge the battery pack immediately after purchase and when the remaining battery power is low. The battery pack is not charged at the time of purchase. 1 Attach the battery pack. Rechargeable Batteries： When using the battery in a low temperature environment (10°C (50°F) or below), the operating time may be shortened, or it may not function properly.
Getting Started Grip Adjustment Inserting an SD Card Insert a commercially available SD card before recording. “Types of Usable SD Card” (A p. 65) “Approximate Video Recording Time” (A p. 112) 1 Close the LCD monitor. 2 Open the cover. . A Open the lever on the strap lock B Adjust the length of the belt C Close the lever Caution : 0 . Be sure to fasten the grip belt properly. If the belt is loose, this unit may drop and result in injuries or damages.
Getting Started 0 Removing the Card Push the SD card inward once, then pull it out straight. 0 0 0 0 0 0 0 . Types of Usable SD Card The following SD cards can be used on this unit. Operations are confirmed on the SD cards from the following manufacturers. 0 Panasonic 0 TOSHIBA 0 SanDisk SD Card Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. This unit is not guaranteed to operate with all SD cards.
Getting Started Using the Touch Screen Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use. 0 There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples. A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection. B Drag the thumbnails on the touch screen to search for the desired file. .
Getting Started Names of Buttons and Functions on the LCD Monitor Playback Screen (Video) The following screens are displayed during the video and still image modes, and operate as the touch screens. 00:01:23 00:12:34 Recording Screen (Video/Still Image) ≪REC MENU . ≪PLAY REC MENU . 1 Video/Still Image Mode Button 0 2 Switches between video and still image modes. 4 3 Switches to the playback mode. 6: Video Recording Start Button Switches to the recording mode.
Getting Started Clock Setting Index Screen The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording. 1 ≪REC Open the LCD monitor. MENU . 1 Video/Still Image Mode Button 0 2 Switches between video and still image modes. Date Button “Operation Buttons for Video Playback” (A p. 113) “Operation Buttons for Still Image Playback” (A p.
Getting Started Resetting the Clock 5 Set the date and time. Set the clock with “CLOCK ADJUST” from the menu. 1 CLOCK SETTING Tap “MENU”. JAN DATE 1 TIME 2012 10 00 AM SET . 0 REC ≪PLAY MENU 0 . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. When the year, month, day, hour, or minute item is tapped, “3” and “2” will be displayed. Tap 3 or 2 to adjust the year, month, day, hour, and minute.
Getting Started Changing the Display Language The language on the display can be changed. 1 When holding this unit, keep your elbows close to your sides to prevent camera shake. Tap “MENU”. REC ≪PLAY Holding this Unit MENU . 0 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. 2 Tap “Q” (common). 3 Tap “LANGUAGE”. . COMMON . 0 LANGUAGE Caution : 0 0 . 0 4 Tap 3 or 2 to move upward or downward for more selection. Tap to the desired language.
Getting Started “Reducing Camera Shake” (A p. 104) Using this Unit Overseas The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p. 71) Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. “Setting the Clock to Local Time when Traveling” (A p.
Getting Started Setting the Clock to Local Time when Traveling Setting Daylight Saving Time Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. Restore the region settings after you returned from the trip. When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is set 1 hour ahead. 1 Tap “MENU”. 1 Tap “MENU”. MENU . 0 . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears.
Getting Started Optional Accessories You can record for a longer time by using the optional battery pack. Product Name Description Battery Pack 0 BN-VG114U 0 BN-VG121U 0 BN-VG138U 0 Provides a longer recording time. It can also be used as a spare battery pack. Battery Charger 0 AA-VG1 0 Enables the battery pack to be charged without using this unit. HDMI Mini Cable 0 VX-HD310 0 VX-HD315 0 Allows viewing in high picture quality when connected to a TV.
Recording Taking Videos in Auto Mode Indications During Video Recording You can record without worrying about the setting details by using the Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions. 0 In case of specific shooting scenes such as person etc., its icon is displayed on the screen. 0 Before recording an important scene, it is recommended to conduct a trial recording. 1 10:10 0:00:00 [2:04] Open the lens cover.
Recording o Scenes of Intelligent Auto Display Icon Operation Buttons for Video Recording Description E Captures one’s skin beautifully. A Allows people to be captured naturally. D Focuses at a far distance and captures a sharp image with vivid colors. I Records with minimal noise in the overall image. B Allows night scenes to be captured accurately with minimal noise in the overall image. J Prevents colors from fading even when recording in a bright environment.
Recording Using the Silent Mode Zooming When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. 0 0 The angle of view can be adjusted using zoom. Use the W end (wide angle end) to shoot a wider field of view. Use the T end (telephoto end) to magnify the subject for shooting. Wide Angle . Telephoto . 0 0 Press and hold the SILENT button to turn on the Silent mode.
Recording Taking Still Images in Auto Mode Indications During Still Image Recording You can record without worrying about the setting details by using the Intelligent Auto mode. 1 1/125 Open the lens cover. 10:10 [6630] . . 2 Display Icon Open the LCD monitor. A Image Size Description Displays the icon of the image size. The size of still images can be changed. “ IMAGE SIZE ” (A p. 181) 0 B TOUCH PRIORITY AE/AF Displays the setting of “TOUCH PRIORITY AE/ AF”.
Recording o Scenes of Intelligent Auto Display Icon Operation Buttons for Still Image Recording Description E Captures one’s skin beautifully. A Allows people to be captured naturally. D Focuses at a far distance and captures a sharp image with vivid colors. I Records with minimal noise in the overall image. B Allows night scenes to be captured accurately with minimal noise in the overall image. J Prevents colors from fading even when recording in a bright environment.
Recording Zoom Button (T/W) Using the Silent Mode When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. ≪PLAY . 0 0 Press and hold the SILENT button to turn on the Silent mode. To turn it off, press and hold the button again. T appears when “SILENT MODE” is set to “ON”. MENU MENU . Memo : 0 Only optical zoom is available in the still image recording mode.
Recording Manual Recording 6 Tap the item to set manually. You can adjust settings, such as brightness and shutter speed, by using the manual mode. Manual recording can be set for both video and still image modes. 1 VIDEO SCENE SELECT Open the lens cover. . 0 For details on the various manual settings, refer to “Manual Recording Menu”. Memo : 0 . 2 Open the LCD monitor. . 0 0 3 Set the recording mode to either A video or B still image.
Recording Manual Recording Menu Shooting According to Scene (Subject) The following items can be set. Common scenes that are often encountered can be recorded with the most suitable settings. Name Description SCENE SELECT 0 FOCUS Use manual focus if the subject is not focused automatically. “Adjusting Focus Manually” (A p. 83) 1 Select the Manual recording mode. Recordings that suit the shooting conditions can be performed easily. “Shooting According to Scene (Subject)” (A p.
Recording 0 0 0 Tap “OFF” to cancel the selection. Tap 3 or 2 to move upward or downward for more selection. Tap L to exit the menu. *The image is only an impression. Setting b NIGHTALIVE Effect Increases gain and brightens the scene automatically using a slow shutter when the surrounding is dark. To prevent camera shake, use a tripod. . g SPOTLIGHT Prevents the human subject from appearing too bright under light. .
Recording Adjusting Focus Manually 6 Adjust the focus. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. 1 Select the Manual recording mode. ≪PLAY SET REC MENU MENU . 0 0 MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 7 Tap E to focus on a distant subject. If E appears blinking, focus cannot be set any further.
Recording Adjusting Brightness 6 Adjust the brightness value. You can adjust the brightness to your preferred level. 1 Select the Manual recording mode. ≪PLAY SET REC MENU . 0 0 0 0 MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 7 Compensation range during video recording: -2.0 to +2.0 Compensation range during still image recording: -2.0 to +2.
Recording Setting White Balance You can set the color tone to suit the light source. AUTO 1 MWB Select the Manual recording mode. FINE CLOUD REC . 0 . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. MANUAL intelligent AUTO . 2 Setting MENU REC ≪PLAY Tap 3 or 2 to move the cursor. Details AUTO Adjusts automatically to the natural colors.
Recording Setting Backlight Compensation BACKLIGHT COMP. You can correct the image when the subject appears too dark due to backlight. OFF 1 ON Select the Manual recording mode. . 0 MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. MANUAL intelligent AUTO . 2 Tap “MENU”. MENU REC ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU .
Recording Taking Close-up Shots 5 Tap “ON”. You can take close-up shots of an object using the tele macro function. TELE MACRO OFF ON . . *The image is only an impression. 1 0 Select the Manual recording mode. Setting MENU REC ≪PLAY . 0 After setting, the tele macro icon o appears. If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.
Recording Recording with Effects Recording with Animation Effects You can add animation effects to video recordings. The animation effects appear when smiles are detected or when the screen is touched. Type of Effect Description of Effect ANIMATION EFFECT Records videos with animation effects. “Recording with Animation Effects” (A p. 88) DECORATE FACE EFFECT Detects faces and enables decorations such as sunglasses to be added. “Recording with Face Decorations” (A p.
Recording During Setting After Setting Note Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when the screen is touched. . . Animation (effect) appears when the screen is touched. . . Animation (effect) appears when the screen is touched. . .
Recording Recording with Face Decorations Recording with Decorative Stamps Detects faces and enables decorations such as sunglasses to be added. Records videos with various decorative stamps. 1 1 Open the LCD monitor. Open the LCD monitor. . 0 0 2 . Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the recording mode. (You can also use the A/B button on this unit.) 0 0 2 Tap “MENU”. Tap “MENU”.
Recording Recording with Personal Handwriting Records videos with your personal handwriting or drawing. 1 Open the LCD monitor. 1 . 0 0 0 6 Tap I to scroll through the list of stamps. Tap M to change the size of stamps. Tap J to return to the previous screen. . 0 0 Tap on the screen to add a stamp. 2 1 ON/ OFF Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the recording mode.
Recording 1 . 0 0 0 0 0 6 You can select a color from white, gray, black, etc. Select P to tap and erase part of the line. Tap H to select the line color. Tap I to scroll through the list of colors. Tap L to select the line thickness. Tap J to return to the previous screen. Start writing and drawing with the provided stylus. 1 ON/ OFF 0:00:00[ޓ0:53] . 0 0 0 0 Tap J to delete all the lines. Tap “ON/OFF” to display/hide the lines. Press the START/STOP button the camera to start recording.
Recording Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. By registering the face of a person beforehand, you can enable tracking of the person even without specific selection during recording. This function is available for both videos and still images. 1 Open the LCD monitor. FACE TRACKING PET TRACKING COLOR TRACKING AREA SELECT . 0 0 2 Set the recording mode to either A video or B still image.
Recording The targeted subject (color) may also be tracked back again if it appears in the center of the screen within a specific time. Caution : Subjects near the sides of the LCD monitor may not respond or be recognized when tapped. In this case, move the subject to the center and tap again. 0 “FACE TRACKING” may not work properly depending on the shooting conditions (distance, angle, brightness, etc.) and the subject (direction of face, etc.).
Recording Memo : The camera is able to detect up to 16 faces. Smile levels will be displayed for up to 3 of the largest faces displayed on the screen. 0 This function may not work properly depending on the shooting conditions (distance, angle, brightness, etc.) and the subject (direction of face, smile level, etc.). It is also difficult to detect a smile in backlight. 0 After a smile is detected and captured, it takes time before the next recording may be performed.
Recording Capturing Pets Automatically (PET SHOT) “PET SHOT” automatically captures a still image upon detection of the face of a pet, such as dogs or cats. This function is available for both videos and still images. 1 Open the LCD monitor. ≪PLAY REC MENU . 0 . 0 0 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen.
Recording Memo : The camera is able to detect up to 6 faces of pets. “PET SHOT” may not work properly depending on the type of pet, shooting conditions (distance, angle, brightness, etc.) and the subject (direction of face, etc.). It is also particularly difficult to detect faces of pets that are totally black, covered in long hair, or in backlight. 0 Subjects other than your pet may be detected by mistake sometimes. Make use of “PET SHOT” only for pets such as dogs or cats.
Recording Caution : 0 0 Take note of the following when “FACE SUB-WINDOW” is set. - Functions such as digital zoom, zoom operation on the touch screen, simultaneous still image recording, “TIME-LAPSE RECORDING”, “DECORATE FACE EFFECT”, “STAMP”, “HANDWRITING EFFECT”, “DATE/TIME RECORDING”, and “AUTO REC” are not available. - Settings such as “FOCUS” and “BRIGHTNESS ADJUST” are set to “AUTO” automatically.
Recording Registering Human Face Personal Authentication Information NEED TO FIT FACE IN FRAME By registering the face of a person beforehand, focus and brightness can be adjusted automatically by the face tracking function. Up to 6 faces, together with names and priority levels, can be registered. It is recommended to register the faces that are often being recorded by this camera beforehand. 1 STOP Open the LCD monitor. . 0 0 0 . 0 0 2 Set the recording mode to either A video or B still image.
Recording RECORD FRONT OF SMILING FACE 11 Tap “OK”. SMILE 75% RECORDING COMPLETED ENTER A NAME STOP OK . 0 0 0 Recording starts automatically. Using the smile % display as a reference, smile such that the value is as high as possible. A sound can be heard when recording is complete. To cancel recording of smiling face and proceed to enter a name, tap “STOP”, then tap “NO” and go to step 11. STOP . 0 0 Tapping “OK” registers the recorded face and the screen for entering a name appears.
Recording Memo : 0 0 0 0 0 0 Faces may not be registered correctly in the following cases: - when the face appears either too small or too large compared to the frame - when it is too dark or too bright - when the face appears horizontal or slanted - when a part of the face is hidden - when there are multiple faces within the frame To increase the accuracy of face recognition, fit only one face within the frame and register in a bright environment.
Recording 5 Editing the Registered Face Information Tap the desired setting. SMILE%/NAME DISPLAY Editing Registered Face Information OFF You can change the name, priority level, and face information that are registered. ON 1 Tap “MENU”. . Setting Details OFF Displays only the frames when faces are detected. ON Displays the frames, names, and smile levels (%) when faces are detected. 0 Frame: Appears around detected faces. Name: Appears for faces that are registered.
Recording TOUCH PERSON TO CANCEL RECORD AGAIN JOHN CHANGE NAME MIKE KEN CHANGE ORDER OF PRIORITY STOP STOP . . 0 If you select “RECORD AGAIN”, proceed to step 6 in ““Registering Human Face Personal Authentication Information” (A p. 99) ”. 0 If you select “CHANGE NAME”, proceed to step 12 in ““Registering Human Face Personal Authentication Information” (A p. 100) ”.
Recording Reducing Camera Shake Slow-motion (High-speed) Recording When the image stabilizer is set, camera shake during video recording can be effectively reduced. 1 Open the LCD monitor. You can record videos in slow-motion by increasing the recording speed to emphasize the movements, and play back the slow-motion video smoothly. This is a handy function for checking movements, such as golf swings.
Recording HIGH SPEED RECORDING OFF ON Recording at Intervals (TIME-LAPSE RECORDING) Enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. 1 Open the LCD monitor. . 0 0 6 When “ON” is tapped, 300 frames can be recorded in 1 second. To cancel high-speed recording, tap “OFF”. Start recording. . 0 0 2 Check if the recording mode is A.
Recording 6 Time-Lapse Setting Start recording. The greater the number of seconds, the longer the recording interval. Setting OFF Deactivates the function. 1SEC INTERVAL Takes a frame at 1-second intervals. Recorded videos will be played back at 30 times speed. 2SEC INTERVAL Takes a frame at 2-second intervals. Recorded videos will be played back at 60 times speed. 5SEC INTERVAL Takes a frame at 5-second intervals. Recorded videos will be played back at 150 times speed.
Recording Recording Automatically by Sensing Movements (AUTO REC) 7 Recording starts automatically when the subject within the red frame moves. This function enables the unit to record automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor. It can be set for both video and still image modes. 1 Open the LCD monitor. 0:00:00[0:00] . 0 0 . 0 0 2 0 Compose the picture according to the subject.
Recording Taking Group Shots (Self-timer) SELF-TIMER OFF The 10-second self-timer and Face Detection self-timer are convenient functions for taking group photos. The 2-second self-timer is useful for preventing camera shake caused by pressing the shutter button. 2SEC 10SEC Memo : When shooting a photo using the self-timer function, use of a tripod is recommended. “Tripod Mounting” (A p. 70) FACE DETECTION . 6 Set the focus on the subject.
Recording Using the Face Detection Self-timer Pressing the SNAPSHOT button starts face detection, and shooting is performed three seconds after another person enters the frame. This function is useful when you want to include the photographer in the group photo. 1 Open the LCD monitor and select the still image mode. . 0 0 7 Frames appear around the faces of the subjects. Pressing the SNAPSHOT button again starts the 10-second selftimer. The photographer enters the frame. Photographer .
Recording Recording Videos with Date and Time You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) 1 Open the LCD monitor. . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “MENU”. MENU REC ≪PLAY .
Recording Checking the Remaining Recording Time You can check the remaining recording time on the built-in memory and SD card as well as the remaining battery power. 1 Open the LCD monitor. . 0 0 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively. Press the INFO button. .
Recording Approximate Video Recording Time Quality Built-in Memory 16 GB (GZ-EX250) UXP 1 h 20 m XP 1 h 50 m SP 2 h 40 m EP 6 h 40 m SSW 5 h 10 m SEW 10 h 40 m Quality SDHC/SDXC Card 4 GB 8 GB 16 GB 32 GB 48 GB 64 GB UXP 20 m 40 m 1 h 20 m 2 h 50 m 4 h 10 m 5 h 40 m XP 30 m 1h 2h 4h 6h 8 h 10 m SP 40 m 1 h 20 m 2 h 50 m 5 h 50 m 8 h 30 m 11 h 30 m EP 1 h 40 m 3 h 30 m 7 h 10 m 14 h 40 m 21 h 30 m 28 h 50 m SSW 1 h 20 m 2 h 40 m 5 h 30 m 11 h 20 m 16 h 40
Playback Playing Back Videos Operation Buttons for Video Playback You can select and play back the recorded videos from an index screen (thumbnail display). 1 During Index Screen Display Open the LCD monitor. ≪REC MENU . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “<
Playback Memo : During Video Playback 0:01:23 Tap or drag on the operation area of the touch screen. Operations buttons on the touch screen disappear if the unit is not operated for about 5 seconds. Tap on the screen to display the operation buttons again. 0 You can search for a specific file by the recording date. “Searching for a Specific Video/Still Image by Date” (A p. 118) 0 0 0:12:34 The recording date and time can be displayed on the screen during playback. “ DISPLAY DATE/TIME ” (A p.
Playback Checking the Content of Videos Quickly (Digest Playback) DIGEST TIME You can play back a digest of the recorded videos (Digest Playback). This is useful for checking the content of the videos quickly. 1 2h21m Open the LCD monitor. 1 min 5 min 15 min 45 min 3 min 10 min 30 min 60 min ≪REC . 0 0 . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video.
Playback Playing a Video with Defective Management Information The management information of a video may be damaged if recording is not performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with defective management information. 1 Playing Back Still Images You can select and play back the recorded still images from an index screen (thumbnail display). 1 Open the LCD monitor. Open the LCD monitor. . 0 0 .
Playback Operation Buttons for Still Image Playback During Still Image Playback During Index Screen Display MENU ≪REC . ≪REC MENU . Display Description Display Description A Video/Still Image Mode Switches between video and still image modes. B T Continuous playback of still images that are recorded continuously within 2 seconds or with the continuous shooting mode. A Video/Still Image Mode Switches between video and still image modes.
Playback Slideshow Playback Still images can be played back in a slideshow. Tap I during still image playback to start the slideshow. Searching for a Specific Video/Still Image by Date When there is a large number of recorded videos and still images, it is difficult to look for the desired file from the index screen. Use the search function to find the file you want. You can search and play videos or still images according to recording dates. 1 ≪REC Tap “MENU”. MENU .
Playback Connecting to and Viewing on TV You can connect this unit to a TV for playback. The image quality on TV varies with the type of TV and the connecting cable. Select the connector that best suits your TV. 0 Refer also to the instruction manual of the TV in use. “Connecting via the HDMI Mini Connector” (A p. 119) “Connecting via the AV Connector” (A p. 120) To display the date and time on TV, set both “DISPLAY DATE/TIME” and “DISPLAY ON TV” to “ON”. “ DISPLAY DATE/TIME ” (A p.
Playback Operating in Conjunction with TV via HDMI Connecting via the AV Connector Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable allows linked operations with the TV to be performed. 0 HDMI-CEC (Consumer Electronics Control) is an industry standard that enables interoperability between HDMI-CEC compliant devices that are connected via HDMI cables. By connecting the supplied AV cable to the AV connector, videos can be played back on a TV.
Playback Playing Back Playlists Playing Back a DVD or Blu-ray Disc Created on this Unit Plays back the playlists that you have created. 1 DVDs or Blu-ray discs created using the backup function on this unit can be played back on TV using an optional DVD writer (DVDs only) with playback function (CU-VD50) or a normal DVD or Blu-ray disc player. DVDs can also be played back on this unit by connecting the optional DVD writer with playback function. “Playing Back with a DVD Writer” (A p.
Editing Deleting Unwanted Files Deleting Selected Files Delete unwanted videos and still images when the space in the recording media is running out. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” (A p. 122) “Deleting Selected Files” (A p. 122) Memo : Deletes the selected files. Caution : 0 1 Deleted files cannot be restored. Open the LCD monitor. Deleted files cannot be restored. When files in a playlist are deleted, the playlist changes.
Editing 0 Protecting Files DELETE Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 123) “Protecting/Releasing Protection of Selected Files” (A p. 124) Caution : SEL ALL 0 REL ALL . 5 When the recording media is formatted, even the protected files will be deleted. Tap “SET”.
Editing 0 Protecting/Releasing Protection of Selected Files Protects or releases protection of the selected files. 1 PROTECT/CANCEL Open the LCD monitor. SEL ALL REL ALL . . 0 0 2 Tap A or B to select the video or still image mode. Tap B or A on the recording screen to display the mode switching screen. Tap A to switch to the video mode A. Tap B to switch to the still image mode B. (You can also use the A/B button on this unit.) 6 Tap “SET” to complete the setting.
Editing Capturing a Still Image in the Video During Playback You can capture still images of the scenes you like in the recorded videos. 1 Open the LCD monitor. Combining Videos Recorded by Seamless Recording (GZ-EX250) Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. “SEAMLESS RECORDING (GZ-EX250)” (A p. 175) 1 Open the LCD monitor. . 0 0 2 Check if the recording mode is A.
Editing Capturing a Required Part in the Video (TRIMMING) COMBINE WITH THIS SCENE? THE ABOVE SCENE IS FOUND YES NO Select the required part of a video and save it as a new video file. 0 The original video remains in its existing location. 1 Open the LCD monitor. . 7 Tap the media to store to. SELECT THE MEDIA TO STORE THE COMBINED SCENES BUILT-IN MEMORY . 0 0 SD CARD Check if the recording mode is A.
Editing Capturing Videos for Uploading to YouTube TRIMMING 0:01:23 0:12:34 STOP Capture and copy a part of a recorded video (maximum 15 minutes) for uploading to YouTube, and save it as a YouTube video. When capturing videos for YouTube, the duration cannot be longer than 15 minutes. 1 Open the LCD monitor. . 0 0 7 When “A” is tapped, the start point is set. After setting the start point, tap d to continue playback. Tap e to pause playback at the desired end point, then tap “B”. TRIMMING .
Editing Uploading Videos to YouTube You can upload your videos to YouTube using the provided software Everio MediaBrowser 4. Install the software on your PC and connect this unit to the PC. 0 For details on how to use the software, refer to the help file. “Copying to Windows PC” (A p. 157) DO YOU WANT TO TRIM THE VIDEO? DO NOT TRIM TRIM Trouble with Uploading Videos： 0 . 0 7 If the selected video is more than 15 minutes, trimming is necessary.
Editing Creating Playlists from the Recorded Videos A list created by selecting your favorite videos from the recorded ones is called a playlist. By creating a playlist, you can play back only your favorite videos in the order you like. The original video file remains even when it is registered to a playlist. 0 To create a new playlist “Creating Playlists with Selected Files” (A p. 129) “Creating Playlists by Date” (A p. 130) To edit or delete a created playlist “Editing Playlists” (A p.
Editing Creating Playlists by Date QUIT PLAYLIST. SAVE EDITED CONTENTS? YES Create a playlist by arranging multiple files according to recording date. 1 Open the LCD monitor. NO . Memo : 0 Tap L on each screen to exit the menu. . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “<
Editing 0/999 FROM DATE 4 4 6 Editing Playlists You can change the content of a created playlist. However, the playlists created from Digest Playback cannot be changed. 2 TOTAL 1 00h00m Open the LCD monitor. QUIT . 0 0 0 0 8 d appears on the selected video. Tap J to deselect. Tap on the selected video again to check all the videos of the same date. After checking, tap J. Tap 0/1 or move the zoom lever to display the previous/next video.
Editing 7 Tap on the video (upper row) to arrange in the playlist. 0/999 EDIT 1920 1920 Deleting Playlists Delete the playlists that you have created. 1 Open the LCD monitor. 1920 DVD 01 DVD(DL)1 TOTAL 00h00m 1920 SAVE . 0 0 0 0 8 d appears on the selected video. Tap J to deselect. Tap on the selected video again to check the video. After checking, tap J. Tap 0/1 or move the zoom lever to display the previous/next video. X indicates the size of the video. .
Copying Creating Discs with a DVD Writer DELETE PLAYLIST? YES NO You can copy the recorded files to discs or play back the created discs using an optional DVD writer. Compatible DVD Writers Product Name Description . 0 0 After deleting, tap “OK”. After deleting is complete, the screen returns to the delete playlist selection screen. Memo : 0 Tap L on each screen to exit the menu. DVD Writer CU-VD3 0 Enables the images recorded on this unit to be copied to a DVD without using a PC.
Copying Preparing a DVD Writer (CU-VD3) Preparing a DVD Writer (CU-VD50) 1 Remove the AC adapter and battery pack from this unit. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. 2 Open the LCD monitor. 3 Connect the USB cable and the AC adapter. 3 Connect the USB cable and the AC adapter. . 0 . Turn off the camcorder by pressing the M button for about 2 seconds. 0 To DC Connector Turn off the camcorder by pressing the M button for about 2 seconds.
Copying Creating a Disc 1 Prepare a DVD writer. 0 Insert a new disc into the DVD writer. “Preparing a DVD Writer (CU-VD3)” (A p. 134) “Preparing a DVD Writer (CU-VD50)” (A p. 134) 2 Copy files to the disc with the following methods. Copying All Files All videos or still images recorded on this unit will be copied. You can also select and copy only the videos or still images that have never been copied. 1 Select video or still image mode. 2 Tap “CREATE FROM ALL” (video) or “SAVE ALL” (still image).
Copying 6 Tap “AUTO” or “BY DATE”. (A mode only) ALL SCENES CREATE HEADLINES ON THE TOP MENU SELECT THE SORT METHOD AUTO Copying Files by Date Videos or still images are sorted and copied according to the date on which they were recorded. 1 Select video or still image mode. 2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image). BY DATE VIDEO BACKUP CREATE FROM ALL . 0 0 7 When “AUTO” is selected, videos with similar recording dates are displayed in groups.
Copying 0 Tap “CHECK” to check the content. 7 Tap “AUTO” or “BY DATE”. (A mode only) CREATE BY DATE CREATE HEADLINES ON THE TOP MENU SELECT THE SORT METHOD AUTO BY DATE . 0 0 8 When “AUTO” is selected, videos with similar recording dates are displayed in groups. When “BY DATE” is selected, videos are displayed according to recording dates. Tap “EXECUTE”. CREATE BY DATE REMAINING DVD 02 DVD(DL)1 EXECUTE STOP .
Copying Copying Selected Playlists 7 After arranging, tap “SAVE”. Arrange and copy the created playlists in the order you like. 1 Select video mode. 2 Tap “SELECT AND CREATE”. 0/999 CREATE BY PLAYLIST 1920 1920 1920 DVD 01 DVD(DL)1 TOTAL VIDEO BACKUP 00h00m CREATE FROM ALL 1920 SAVE SELECT AND CREATE . 8 PLAYBACK Tap “EXECUTE”. CREATE BY PLAYLIST REQUIRED DISC SPACE DVD:2 / DVD(DL):1 PREPARE AN EMPTY DISC . 3 Tap on the media to copy.
Copying 0 To check the created disc, refer to ““Playing Back with a DVD Writer” (A p. 140) ”. “Playing Back with a DVD Writer” (A p. 140) To create a playlist “Creating Playlists from the Recorded Videos” (A p. 129) 0 Copying Selected Files Select and copy the desired videos or still images individually. 1 Select video or still image mode. 2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image). VIDEO BACKUP CREATE FROM ALL SELECT AND CREATE PLAYBACK .
Copying 0 7 While the video mode is shown in the image, the same operations apply for the still image mode. Tap “EXECUTE”. Playing Back with a DVD Writer You can play back the DVDs created on this unit. 1 SELECT FROM SCENES REQUIRED DISC SPACE DVD:2 / DVD(DL):1 PREPARE AN EMPTY DISC EXECUTE Prepare a DVD writer. Insert the DVD to play back into the DVD writer. “Preparing a DVD Writer (CU-VD3)” (A p. 134) “Preparing a DVD Writer (CU-VD50)” (A p. 134) 0 2 Tap “PLAYBACK” in the BACK-UP menu.
Copying Creating Discs with an External Blu-ray Drive You can copy the recorded files to discs or play back the created discs using an optional BD writer (external Blu-ray drive). Compatible BD Writers (External Blu-ray Drives) You can use BE08LU20 from LG. (as of November, 2011) Creating Discs with a BD Writer (External Blu-ray Drive) Preparing an External Blu-ray Drive Memo : To use the USB cable provided with the BD writer (external Blu-ray drive), purchase the following USB conversion cable.
Copying 4 Creating a Disc Insert a new disc. Creating a Disc 1 0 Insert a new disc into the BD writer (external Blu-ray drive). “Preparing an External Blu-ray Drive” (A p. 141) . A Press the eject button to open the disc tray. B Load a new disc properly. C Press the eject button to close the disc tray. 2 0 0 Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur. Do not connect the AC adapter provided with this unit to the BD writer.
Copying 0 “ALL SCENES” (video)/“ALL IMAGES” (still image): All videos or still images in this unit are copied. 0 “UNSAVED SCENES” (video)/“UNSAVED IMAGES” (still image): Videos or still images that have never been copied are automatically selected and copied. 6 0 To check the created disc, refer to ““Playing Back with an External Blu-ray Drive” (A p. 148) ”. “Playing Back with an External Blu-ray Drive” (A p. 148) Tap “EXECUTE”.
Copying 0 Copying Files by Date Videos or still images are sorted and copied according to the date on which they were recorded. 1 Select video or still image mode. 2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image). 7 You cannot select more than one recording date for copying. To copy files from multiple recording dates, it is recommended to copy by creating a playlist. “Creating Playlists from the Recorded Videos” (A p. 129) “Copying Selected Playlists” (A p. 145) Tap “EXECUTE”.
Copying 0 To check the created disc, refer to ““Playing Back with an External Blu-ray Drive” (A p. 148) ”. “Playing Back with an External Blu-ray Drive” (A p. 148) Copying Selected Playlists Arrange and copy the created playlists in the order you like. 1 Select video mode. 2 Tap “SELECT AND CREATE”. VIDEO BACKUP CREATE FROM ALL SELECT AND CREATE PLAYBACK . 3 Tap “Blu-ray DISC” or “DVD(AVCHD)”. SELECT AND CREATE CHANGE REC. MEDIA Blu-ray DISC DVD(AVCHD) .
Copying CREATE BY PLAYLIST 0/999 1920 1920 COMPLETED 1920 TOTAL 00h00m ADD OK QUIT . . 0 0 0 0 0 8 Repeat steps 6-7 and arrange the playlists. To change the position of a playlist (lower), select the insertion point with E/F after step 6 and tap “ADD”. d appears when the inserted playlist is selected. Tap J to deselect. Tap on the selected playlist again to check the content of the playlist. After checking, tap J.
Copying 0 Copying Selected Files Select and copy the desired videos or still images individually. 1 Select video or still image mode. 2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still image). 0 7 A check mark appears on the selected file. To remove the check mark, tap on the file again. Tap “CHECK” to check the file. After checking, tap J. After selecting all the files, tap “SAVE”. SELECT FROM SCENES VIDEO BACKUP CREATE FROM ALL SELECT AND CREATE PLAYBACK CHECK QUIT SAVE . .
Copying 0 0 0 Files that are not on the index screen during playback cannot be copied. Special files cannot be copied either. All DVDs will be finalized automatically. While files cannot be added to the DVD-R/DVD-RW later, files can still be added to the BD-R/BD-RE. DVDs that are created in “DVD(AVCHD)” format are playable only on AVCHD compatible devices. Memo : 0 To check the created disc, refer to ““Playing Back with an External Blu-ray Drive” (A p. 148) ”.
Copying Creating a Disc Using a Connected Blu-ray Recorder Dubbing Files to a Disc by Connecting to a DVD Recorder You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable. You can dub videos in standard quality by connecting to a DVD recorder. 0 Refer also to the instruction manuals of the TV and DVD recorder. 1 Remove the AC adapter and battery pack from this unit. 2 1 Remove the AC adapter and battery pack from this unit. Open the LCD monitor.
Copying Dubbing Files to a VHS Tape by Connecting to a VCR You can dub videos in standard quality by connecting to a VCR. 0 Refer also to the instruction manuals of the TV and VCR. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. Copying Files with a USB External Hard Disk Drive You can copy video and still image files to a USB external hard disk drive from this unit. You can also play the files in the USB external hard disk drive on this unit.
Copying Preparing a USB External Hard Disk Drive Copying All Files Memo : All videos or still images recorded on this unit will be copied. You can also select and copy only the videos or still images that have never been copied. 0 0 When connecting to the external hard disk drive, use a USB cable with Mini-A (Male) – B (Male) connectors. The USB cable provided with this unit cannot be used. To use the USB cable provided with the USB external hard disk drive, purchase the following USB conversion cable.
Copying 6 Tap “OK” when “COMPLETED” is displayed. ALL SCENES SAVED Playing Back Files in the USB External Hard Disk Drive Videos or still images saved in an external hard disk drive can be played back on this unit. 1 Select video or still image mode. 2 Tap “PLAYBACK”. VIDEO BACKUP OK PLAYBACK . 7 Press and hold the M button for 2 seconds or more to turn off this unit and disconnect the USB cable. Caution : 0 0 0 Do not turn off the power or remove the USB cable until copying is complete.
Copying Deleting Folders in the USB External Hard Disk Drive Formatting the USB External Hard Disk Drive Files that are copied to the external hard disk drive can be deleted. All files on the external hard disk drive can be deleted. Caution : Caution : 0 0 0 Deleted files cannot be restored. Be sure to back up important files on a PC. “Backing Up All Files” (A p. 159) All data on the external hard disk drive will be deleted when it is formatted.
Copying Importing Files from the USB External Hard Disk Drive COPY ALL You can copy video files from a USB external hard disk drive to the built-in memory of this unit or an SD card. 1 Select video mode. 2 Tap “IMPORT FROM DEVICE” in “BACK-UP”. COPY QUANTITY:30 START COPY? YES NO VIDEO BACKUP . 0 0 IMPORT FROM DEVICE 8 Importing starts when “YES” is tapped. To cancel importing of files, tap “STOP”, then tap “YES”. After importing, tap “OK”. COPY ALL .
Copying Copying Files to an SD Card (GZ-EX250) QUANTITY:0030 You can copy videos and still images from the built-in memory to SD card. Copying still images to cards makes it convenient to bring them to the shop for printing (developing). Caution : 0 0 Make sure that there is enough space left in the destination medium. Videos in the SD card cannot be copied to the built-in memory. SEL ALL REL ALL SET STOP . 1 0 Open the LCD monitor. 8 “SET” is deactivated when no file is selected.
Copying Moving Files to an SD Card (GZ-EX250) QUANTITY:0030 You can move videos and still images from the built-in memory to SD card. Files that are moved will be deleted from the built-in memory. Moving still images to SD cards makes it convenient to bring them to the shop for printing (developing). Caution : 0 0 1 Make sure that there is enough space left in the destination medium. Videos in the SD card cannot be moved to the built-in memory. Open the LCD monitor. SEL ALL REL ALL SET STOP .
Copying Copying to Windows PC You can copy files to a computer using the provided software. Discs can also be created using the computer’s DVD or Blu-ray drive. If the provided software is not installed, this unit will be recognized as an external storage when connected. Memo : To record to discs, a recordable DVD or Blu-ray drive is required for the computer in use. Still images cannot be recorded to discs using the provided software.
Copying Installing the Provided Software You can display the recorded images in calendar format and perform simple editing using the provided software. Windows Vista/Windows 7 0 Refer to the operating instructions found in the animation on the Detailed User Guide. Windows XP 0 Refer to the operating instructions found in the animation on the Detailed User Guide.
Copying Backing Up All Files Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). Backup will not start if there is not enough free space. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. 1 Click 2 Click Click “Next” Click “All volume in camcorder” . 7 . 3 Start backup. Connect the USB cable and the AC adapter.
Copying Disconnecting this Unit from Computer 1 Click “Safely Remove Hardware and Eject Media”. Organizing Files After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too. 1 Double-click on the Everio MediaBrowser 4 icon. 0 The provided software starts up. Click . 2 Click “Safely Remove USB Mass Storage Device”. 3 (For Windows Vista) Click “OK”.
Copying 4 Recording Videos to Discs Click on the recording day. 0 The thumbnails of the files recorded on the day are displayed. Recording Date Copy the files that are arranged using the user list to discs. 1 Insert a new disc into the PC’s recordable DVD drive. 2 Select the desired user list. . 5 Register files to the created user list. User List Thumbnails Click . 3 Select the disc type. Drag Drop .
Copying Memo : The following types of discs can be used on the provided software Everio MediaBrowser 4. DVD-R DVD-R DL DVD-RW DVD+R DVD+R DL DVD+RW 0 The following formats are supported by the provided software Everio MediaBrowser 4. AVCHD DVD-Video* *To create DVD-Video discs, it is necessary to install the additional software. For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ 0 Use Everio MediaBrowser 4 Player to play back an AVCHD disc.
Copying Backing Up Files Without Using Provided Software Caution : Copy the files to a computer using the following method. 0 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. When the folders or files are deleted/moved/renamed in the computer, they cannot be played back on this unit anymore. Memo : 0 0 To edit/view the files, use a software that supports AVCHD (video)/JPEG (still image) files. The above operations on computer may vary with the system used.
Copying List of Files and Folders Folders and files are created in the built-in memory and SD card as shown below. They are created only when necessary. . Still Image Folder [JV C CAM _M EM] [ DCIM ] (Built-In Memory) [JVCCAM_SD] PIC_0001.JPG PIC_0002.JPG PIC_0003.JPG Still Image File … … [ 100JVCSO ] [ 101JVCSO ] [ 102JVCSO ] (SD Card) [ AVCHD ] [ BDMV ] [ EXTMOV ] [ PRIVATE ] (Management Information) DEM_0000.MTS M OV_ 00 01 .M T S M OV_ 00 02 .M T S M OV_ 00 03 .
Copying Copying to Mac Computer iMovie and iPhoto Copy the files to a Mac computer using the following method. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. You can import files from this unit to a computer using Apple’s iMovie ’08, ’09, ’11 (video) or iPhoto (still image). To verify the system requirements, select “About This Mac” from the Apple menu. You can determine the operating system version, processor and amount of memory.
Menu Settings Operating the Menu There are three types of menus in this unit. 0 Shortcut menu - Menu that contains the recommended functions from the video/still image main menu. 0 Main menu - Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively.
Menu Settings Operating the Main Menu Operating the Common Menu You can configure various settings using the menu. You can configure common setting items regardless of the mode using the common menu. 1 Tap “MENU”. 0 The menu differs according to the mode in use. REC ≪PLAY 1 Tap “MENU”. 0 The menu differs according to the mode in use. MENU 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap the desired menu. VIDEO REC ≪PLAY . MENU .
Menu Settings Recording Menu (Video) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “MENU”. ≪PLAY MENU REC . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU . Setting Details SCENE SELECT Settings to suit the shooting condition can be selected.
Menu Settings Setting Details TELE MACRO Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots” (A p. 87) *Displayed only in the manual recording mode. TOUCH PRIORITY AE/AF Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 93) LIGHT (GZ-EX215) Turns on/off the light. “LIGHT (GZ-EX215)” (A p.
Menu Settings Setting Details SEAMLESS RECORDING (GZ-EX250) Continues recording on the SD card without stopping when the remaining space on the built-in memory runs out. “SEAMLESS RECORDING (GZ-EX250)” (A p. 175) ZOOM MIC Sets the zoom microphone. “ ZOOM MIC ” (A p.
Menu Settings SCENE SELECT LIGHT (GZ-EX215) Settings to suit the shooting condition can be selected. Operating Details “Shooting According to Scene (Subject)” (A p. 81) Turns on/off the light. FOCUS Focus can be adjusted manually. Operating Details “Adjusting Focus Manually” (A p. 83) BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. Operating Details “Adjusting Brightness” (A p. 84) Setting Details OFF Does not light up. AUTO Lights up automatically when the surrounding is dark.
Menu Settings GAIN UP WIND CUT Makes the subject appear bright automatically when recording in dark places. Reduces the noise caused by wind. Setting Details OFF Deactivates the function. ON Electrically brightens the scene when it is dark. AUTO SLOWSHUTTER Slows down the shutter speed to brighten the scene when it is dark. Memo : 0 Setting Details OFF Deactivates the function. ON Activates the function. Displaying the Item 1 Open the LCD monitor.
Menu Settings ANIMATION EFFECT SMILE SHOT Records videos with animation effects. Operating Details “Recording with Animation Effects” (A p. 88) Automatically captures a still image upon detection of a smile. Operating Details “Capturing Smiles Automatically (SMILE SHOT)” (A p. 94) DECORATE FACE EFFECT SMILE%/NAME DISPLAY Detects faces and enables decorations such as sunglasses to be added. Operating Details “Recording with Face Decorations” (A p. 90) Sets the items to display when faces are detected.
Menu Settings VIDEO QUALITY ZOOM Sets the video quality. Sets the maximum zoom ratio. Setting Details Setting UXP Enables recording in the best picture quality. 0 Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs. XP Enables recording in high picture quality. SP Enables recording in standard quality. EP Enables long recordings. SSW Enables recording in the best picture quality. SEW Enables recording in the best picture quality.
Menu Settings SEAMLESS RECORDING (GZ-EX250) ZOOM MIC Continues recording on the SD card without stopping when the remaining space on the built-in memory runs out. Sets the zoom microphone. Setting Details OFF Does not switch recording media automatically. ON Switches recording media automatically. Memo : Seamless recording cannot be performed if there is not enough free space in the SD card. 0 q appears if seamless recording cannot be performed.
Menu Settings Recording Menu (Still Image) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “MENU”. MENU MENU ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU . Setting Details SCENE SELECT Settings to suit the shooting condition can be selected.
Menu Settings Setting Details TELE MACRO Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots” (A p. 87) *Displayed only in the manual recording mode. TOUCH PRIORITY AE/AF Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 93) LIGHT (GZ-EX215) Turns on/off the light. “LIGHT (GZ-EX215)” (A p. 178) SELF-TIMER Use this when taking a group photo.
Menu Settings SCENE SELECT LIGHT (GZ-EX215) Settings to suit the shooting condition can be selected. Operating Details “Shooting According to Scene (Subject)” (A p. 81) Turns on/off the light. FOCUS Focus can be adjusted manually. Operating Details “Adjusting Focus Manually” (A p. 83) BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. Operating Details “Adjusting Brightness” (A p. 84) Setting Details OFF Does not light up. AUTO Lights up automatically when the surrounding is dark.
Menu Settings SELF-TIMER AUTO REC Use this when taking a group photo. Operating Details “Taking Group Shots (Self-timer)” (A p. 108) Starts recording automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor. Operating Details “Recording Automatically by Sensing Movements (AUTO REC)” (A p. 107) GAIN UP Makes the subject appear bright automatically when recording in dark places. Setting Details OFF Deactivates the function.
Menu Settings SHUTTER MODE SMILE SHOT Continuous shooting settings can be adjusted. Automatically captures a still image upon detection of a smile. Operating Details “Capturing Smiles Automatically (SMILE SHOT)” (A p. 94) Setting Details RECORD ONE SHOT Records one still image. CONTINUOUS SHOOTING Records still images continuously while the SNAPSHOT button is pressed. SMILE%/NAME DISPLAY Memo : 0 0 0 The continuous shooting speed can be changed.
Menu Settings IMAGE SIZE Sets the image size (number of pixels) for still images. Setting Details 1920X1080(2M) Takes still images with aspect ratio 16:9. The sides of still images recorded in 16:9 aspect ratio may be cut off when printed. 0 1440X1080(1.5M) 640X480(0.3M) Takes still images with aspect ratio 4:3. Displaying the Item 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “MENU”. MENU MENU ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu.
Menu Settings Playback Menu (Video) You can delete or look for specific videos. 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “<
Menu Settings SEAMLESS REC CTRL (GZ-EX250) Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. “Combining Videos Recorded by Seamless Recording (GZ-EX250)” (A p. 125) K2 TECHNOLOGY Reproduces small or high-pitched sounds that cannot be recorded during recording, and plays back with a sound quality close to the original. “ K2 TECHNOLOGY ” (A p.
Menu Settings DISPLAY DATE/TIME DIGEST PLAYBACK Sets whether to display the recording date and time during video playback. Plays back a digest of the recorded videos. Operating Details “Checking the Content of Videos Quickly (Digest Playback)” (A p. 115) Setting Details OFF Does not display the date and time during playback. ON Displays the date and time during playback. Displaying the Item 1 PLAYBACK PLAYLIST Plays back the playlists that you have created.
Menu Settings K2 TECHNOLOGY Reproduces small or high-pitched sounds that cannot be recorded during recording, and plays back with a sound quality close to the original. Setting Details OFF Deactivates K2 TECHNOLOGY. ON Activates K2 TECHNOLOGY. Displaying the Item 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “<
Menu Settings Playback Menu (Still Image) You can delete or look for specific still images. 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “<
Menu Settings SLIDE SHOW EFFECTS PROTECT/CANCEL Sets the transition effects in slideshow playback. Protects files from being deleted accidently. Operating Details “Protecting/Releasing Protection of the Currently Displayed File” (A p. 123) “Protecting/Releasing Protection of Selected Files” (A p. 124) Setting Details SLIDE Switches the screen by sliding in from right to left. BLINDS Switches the screen by dividing into vertical strips.
Menu Settings Common Menu 1 Tap “MENU”. ≪PLAY REC MENU . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. . Setting Details CLOCK ADJUST Resets the current time or sets to the local time when using this unit overseas. “Clock Setting” (A p. 68) “Setting the Clock to Local Time when Traveling” (A p. 72) “Setting Daylight Saving Time” (A p. 72) DATE DISPLAY STYLE Sets the order of year, month, day and the time display format (24H/12H).
Menu Settings Setting Details TOUCH SCREEN ADJUST Adjusts the response position of the buttons on the touch screen. “ TOUCH SCREEN ADJUST ” (A p. 194) DISPLAY ON TV Displays icons and date/time on a TV screen. “ DISPLAY ON TV ” (A p. 195) VIDEO OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. “ VIDEO OUTPUT ” (A p. 196) HDMI OUTPUT Sets the definition of the video output from the HDMI mini connector. “ HDMI OUTPUT ” (A p.
Menu Settings CLOCK ADJUST MONITOR BRIGHTNESS Resets the current time or sets to the local time when using this unit overseas. Operating Details “Clock Setting” (A p. 68) “Setting the Clock to Local Time when Traveling” (A p. 72) “Setting Daylight Saving Time” (A p. 72) Sets the brightness of the LCD monitor. DATE DISPLAY STYLE Setting Details AUTO Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors.
Menu Settings REC MEDIA FOR VIDEO (GZ-EX250) REC MEDIA FOR IMAGE (GZ-EX250) Sets the recording/playback media of videos. Sets the recording/playback media of still images. Setting Details Setting Details BUILT-IN MEMORY Records videos to this unit's built-in memory. BUILT-IN MEMORY Records still images to this unit’s built-in memory. SD CARD Records videos to the SD card. SD CARD Records still images to the SD card. Displaying the Item Displaying the Item 1 1 Tap “MENU”.
Menu Settings OPERATION SOUND SILENT MODE Turns on or off the operation sound. When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. Setting Details OFF Turns off the operation sound. ON Turns on the operation sound. Displaying the Item 1 Setting Details OFF Turns off the Silent mode. ON Turns on the Silent mode. Displaying the Item Tap “MENU”. 1 REC ≪PLAY Tap “MENU”.
Menu Settings AUTO POWER OFF QUICK RESTART Prevents the situation of forgetting to turn off the power when this is set. Enables the power to turn on quickly when the LCD monitor is opened again within 5 minutes. Setting Details OFF Power is not turned off even if this unit is not operated for 5 minutes. ON Turns off the power automatically if this unit is not operated for 5 minutes. Setting OFF Deactivates the function.
Menu Settings DEMO MODE TOUCH SCREEN ADJUST Plays a demonstration of the special features of this unit. Adjusts the response position of the buttons on the touch screen. Setting 1 Details OFF Deactivates the function. ON Plays a demonstration of the special features of this unit. Tap “MENU”. Displaying Demo Mode A Remove the battery pack and SD card. B Connect the AC adapter. C Open the LCD monitor and turn on the power. 0 0 REC ≪PLAY MENU . 0 Demonstration starts playing after 3 minutes.
Menu Settings DISPLAY ON TV COMPLETED Displays icons and date/time on a TV screen. Setting OK Details OFF Does not display icons and date/time on TV. ON Displays icons and date/time on TV. . 0 Setting ends and returns to the menu screen. Caution : 0 Do not tap areas other than the “+” mark during touch screen adjustment (steps 4 - 5). Doing so may cause the touch screen to malfunction. Displaying the Item 1 Tap “MENU”. Memo : 0 0 Adjust by lightly tapping with the stylus pen.
Menu Settings VIDEO OUTPUT HDMI OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Sets the output from the HDMI connector of this unit when it is connected to a TV. Setting Details 4:3 Select this when connecting to a conventional TV (4:3). 16:9 Select this when connecting to a widescreen TV (16:9). Setting Details AUTO It is recommended to select “AUTO” usually. 480p Select this when the video is not output in “AUTO” correctly.
Menu Settings HDMI CONTROL FACTORY PRESET Sets whether to link operations with an HDMI-CEC compliant TV. Returns all the settings to their default values. Setting 1 Details OFF Turns off linked operations. ON Turns on linked operations. Tap “MENU”. Displaying the Item 1 Tap “MENU”. MENU REC ≪PLAY . 0 2 REC ≪PLAY When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. MENU .
Menu Settings FORMAT BUILT-IN MEM. (GZ-EX250) FORMAT SD CARD Deletes all files on the built-in memory. Deletes all files on the SD card. Setting Details Setting Details FILE Deletes all files on the built-in memory. FILE Deletes all files on the SD card. FILE + MANAGEMENT NO Deletes all files on the built-in memory and resets the folder and file numbers to "1". FILE + MANAGEMENT NO Deletes all files on the SD card and resets the folder and file numbers to "1".
Menu Settings ERASE ALL DATA (GZ-EX250) MOBILE USER GUIDE Execute this process when disposing of this unit or passing it to another person. Displays the QR code to access the Mobile User Guide. 1 Tap “MENU”. 1 Tap “MENU”. REC ≪PLAY MENU REC ≪PLAY 0 . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. MENU . 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. . 3 . 3 Tap “ERASE ALL DATA”.
Names of Parts Front Rear 1 2 1 2 7 3 3 4 5 4 . 1 1 SNAPSHOT (Still Image Recording) Button 0 2 0 0 0 3 4 5 During shooting: Adjusts the shooting range. During playback (index screen): Moves to the next or previous page. During video playback: Adjusts the volume. Lens Cover 0 0 2 Takes a still image. Zoom/Volume Lever Do not touch the lens and lens cover. Do not cover the lens with your fingers during recording. DC Connector 0 . Lights up/blinks during recording or playback.
Names of Parts Bottom Interior . 1 Speaker 0 2 A / B (Video/Still Image) Button 0 3 2 SD Card Slot 4 Battery Release Lever “Charging the Battery Pack” (A p. 63) 4 a Button The setting of image stabilizer changes with every press during video recording. “Reducing Camera Shake” (A p. 104) 0 Insert an optional SD card. “Inserting an SD Card” (A p. 64) 0 3 SILENT Button Press and hold the SILENT button to turn on the Silent mode. To turn it off, press and hold the button again.
Names of Parts LCD Monitor . 1 LCD Monitor 0 0 Turns the power on/off by opening and closing. Enables self-portraits to be taken by rotating the monitor. . “Using the Touch Screen” (A p. 66) “Names of Buttons and Functions on the LCD Monitor” (A p. 67) Caution : 0 Do not press against the surface with force or subject it to strong impact. Doing so may damage or break the screen.
Indications on the LCD monitor Common Recording Indications Video Recording 1 2345 67890ab g 1 2 3 4 5 10:45 10X f 6 c d 0:00:12:34 0:12:34[010:00] e . . 1 TOUCH PRIORITY AE/AF “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 93) 2 Backlight Compensation “Setting Backlight Compensation” (A p. 86) 3 Auto REC “Recording Automatically by Sensing Movements (AUTO REC)” (A p. 107) 4 Tele Macro “Taking Close-up Shots” (A p.
Indications on the LCD monitor Still Image Recording 1 Video Playback 2 12 b a 3 [9999] 3 4 00:01:23 56 10:00 00:12:34 1SEC 7 8 9 0 4 ≪REC . . 1 5 6 Still Image Mode “A / B (Video/Still Image) Button” (A p. 201) 2 Image Size “ IMAGE SIZE ” (A p. 181) 3 Self-Timer “Taking Group Shots (Self-timer)” (A p. 108) 4 Remaining Number of Shots “Checking the Remaining Recording Time” (A p. 112) 5 Focus 6 Recording in Progress 1 Video Mode “A / B (Video/Still Image) Button” (A p.
Indications on the LCD monitor Still Image Playback 1 23 When the unit is not working properly 4 100-0001 56 Turning Off the Power 10:00 7 8 9 1 Close the LCD monitor. ≪REC . 1 Still Image Mode “A / B (Video/Still Image) Button” (A p. 201) 2 Folder Number 3 File Number 4 Date/Time 0 5 . 2 Remove the AC adapter and battery pack from this unit, reattach them, open the LCD monitor and this unit powers on automatically. (Reset complete) Displays the recording date and time.
Troubleshooting Battery Pack Recording Unable to turn on the power when using the battery pack. Recording cannot be performed. Recharge the battery pack. “Charging the Battery Pack” (A p. 63) Check whether the terminals are dirty. If the terminal of this unit or the battery pack is dirty, wipe it with a cotton swab or something similar. If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed. Be sure to use JVC battery packs. Check the A / B button.
Troubleshooting Card Playback Cannot insert the SD card. Sound or video is interrupted. Make sure not to insert the SD card in the wrong direction. “Inserting an SD Card” (A p. 64) Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction. Unable to copy to SD card. There is no sound. Set “REC MEDIA FOR VIDEO”/“REC MEDIA FOR IMAGE” to SD card. “REC MEDIA FOR VIDEO (GZ-EX250)” (A p. 191) “REC MEDIA FOR IMAGE (GZ-EX250)” (A p.
Troubleshooting Unable to play back DVD with title. The title will not be played back if you connect this unit to a DVD writer (optional). Editing/Copying Unable to delete file. Files (videos/still images) that are protected cannot be deleted. Release protection before deleting the file. “Protecting Files” (A p. 123) Unable to create DVD with a DVD writer. The USB cable is not connected correctly. “Preparing a DVD Writer (CU-VD50)” (A p. 134) “Preparing a DVD Writer (CU-VD3)” (A p.
Troubleshooting Computer Screen/Image Unable to copy files to the computer’s HDD. The LCD monitor is difficult to see. Connect the USB cable correctly. If the provided software Everio MediaBrowser 4 is not installed, some functions may not work properly. “Installing the Provided Software” (A p. 158) Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight.
Troubleshooting Other Problems Error Message? The buttons on the touch screen do not work. CHECK LENS COVER Tap the buttons on the touch screen with your fingers or the stylus pen. The buttons may not respond if you touch them with your fingernails or with gloves on. Open the lens cover. The image is grainy. When digital zoom is used, the image becomes grainy as it is digitally enlarged. SET DATE/TIME! Connect the AC adapter, charge the battery for more than 24 hours and set the clock.
Troubleshooting VIDEO MANAGEMENT FILE IS DAMAGED, RECOVERY IS REQUIRED TO RECORD/PLAYBACK, RECOVER? PROCESSING CANCELLED DUE TO LIMITED SPACE FOR OPERATION Select “OK” to restore. (Videos that cannot be restored will not be displayed on the index screen, but you may be able to play them back using “PLAYBACK OTHER FILE” in the menu.) “Playing a Video with Defective Management Information” (A p. 116) Reduce the number of videos to add to the playlist to 999 files.
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : 0 Be sure to detach the battery pack, AC adapter, and power plug before performing any maintenance. Camcorder 0 0 Wipe this unit with a dry, soft cloth to remove any dirt. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent. Caution : 0 0 0 Do not use solvents such as benzene, thinner, or alcohol.
Specifications Camera Item Details Power supply Using AC adapter: DC 5.2 V Using battery pack: DC 3.6 V Power consumption 2.3 W (MONITOR BRIGHTNESS: 3 (standard)) 2.5 W (MONITOR BRIGHTNESS: 4 (brighter)) When “LIGHT” is“OFF” (GZ-EX215) Dimensions (mm) 50.
Specifications Connectors AC Adapter (AC-V11U) Item Details HDMI output connector HDMI mini connector AV output connector Video output: 1.0 V (p-p), 75 Ω Audio output: 300 mV (rms), 1 KΩ USB connector Mini USB Type AB, USB 2.0 compliant Video Item Details Item Details Power supply AC 110 V to 240 V, 50 Hz/60 Hz Output DC 5.
© 2012 JVC KENWOOD corporation C2A 0212MYH-SW-VM
