DLA-HD1D_EN.book Page 1 Thursday, January 11, 2007 4:34 PM ENGLISH FRANÇAIS ESPAÑOL D-ILA HOME THEATER PROJECTOR PROJECTEUR CINÉMA MAISON D-ILA SISTEMA DE CINE EN CASA D-ILA Preparation DLA-HD1 Getting Started INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES Basic Operation Settings Troubleshooting Pour utilisation par le client : Instrucción para el cliente : Enter below the serial No. which is located on the bottom side of the cabinet. Retain this information for future reference.
DLA-HD1D_EN.book Page 2 Thursday, January 11, 2007 4:34 PM 1 Getting Started Safety Precautions IMPORTANT INFORMATION This product has a High Intensity Discharge (HID) lamp that contains mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities or for USA, the Electronics Industries Alliance: http://www.eiae.org.
DLA-HD1D_EN.book Page 3 Thursday, January 11, 2007 4:34 PM ENGLISH 300 mm and above 200 mm and above Others When the power supply cord or plug is damaged. If liquid has been spilled, or objects have fallen on the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions.
DLA-HD1D_EN.book Page 4 Thursday, January 11, 2007 4:34 PM 1 Getting Started Safety Precautions (Continued) POWER CONNECTION The power supply voltage rating of this product is AC120 V, AC110 V – AC240 V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed.
DLA-HD1D_EN.book Page 5 Thursday, January 11, 2007 4:34 PM ENGLISH This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
DLA-HD1D_EN.book Page 6 Thursday, January 11, 2007 4:34 PM Getting Started 1 Safety Precautions (Continued) ENGLISH Information for Users on Disposal of Old Equipment Attention: This symbol is only valid in the European Union. FRANÇAIS Informations relatives à l’élimination des appareils usagés, à l’intention des utilisateurs Attention: Ce symbole n’est reconnu que dans l’Union européenne.
DLA-HD1D_EN.book Page 7 Thursday, January 11, 2007 4:34 PM ENGLISH Información para los usuarios sobre la eliminación de equipos usados PORTUGUÊS Informações para os Utilizadores sobre a Eliminação de Equipamento Antigo Atención: Atenção: Este símbolo sólo es válido en la Unión Europea. Este símbolo apenas é válido na União Europeia. Este símbolo indica que o equipamento eléctrico e electrónico não deve ser eliminado como um resíduo doméstico geral, no fim da respectiva vida útil.
DLA-HD1D_EN.book Page 8 Thursday, January 11, 2007 4:34 PM Getting Started 1 Safety Precautions (Continued) DANSK Brugerinformation om bortskaffelse af gammelt udstyr SVENSKA Information till användare gällande kassering av gammal utrustning Bemærk: Tänk på: Dette symbol er kun gyldigt i EU. Att denna symbol endast gäller inom den Europeiska gemenskapen.
DLA-HD1D_EN.book Page 9 Thursday, January 11, 2007 4:34 PM ENGLISH Информация для пользователей, выбрасывающих старое оборудование Внимание: ČESKY Informace pro uživatele k likvidaci starého zařízení Действие этого символа распространяется только на Европейский Союз. Getting Started РУССКИЙ Upozornění: Tento symbol je platný jen v Evropské unii. (Организации-пользователи) Прежде чем выбрасывать данный продукт, ознакомьтесь с информацией о приемке отработавших продуктов, приведенной на веб-узле www.
DLA-HD1D_EN.book Page 10 Thursday, January 11, 2007 4:34 PM Main Features Supports Multiple Digital Devices z Comes with a dual HDMI terminal that allows digital transmission of high definition signals.
DLA-HD1D_EN.book Page 11 Thursday, January 11, 2007 4:34 PM Getting Started z Enjoy smooth and high resolution video images with no visible grid, brought about by full high definition resolution of 1920 c 1080 pixels. (pP24) Preparation Beautiful Images on Big Screen Basic Operation Settings Troubleshooting Perfect for Any Location with an 80 % vertical and 34 % horizontal lens shift function.
DLA-HD1D_EN.book Page 12 Thursday, January 11, 2007 4:34 PM Getting Started 1 Contents Getting Started Troubleshooting Safety Precautions................................................2 Troubleshooting.................................................38 Main Features ...................................................10 What to Do When These Messages Are Displayed .................................................40 Contents............................................................
DLA-HD1D_EN.book Page 13 Thursday, January 11, 2007 4:34 PM ENGLISH About this Manual Getting Started How to Read this Manual/ Accessories/Optional Accessories This manual mainly describes the operating method using the remote control. Conventions in this manual Preparation z Buttons on the remote control are described as [Button Name]. z Selection items on the menu are described as ASelection ItemB. Describes the limitations of the functions or usage. Indicates good-to-know information.
DLA-HD1D_EN.book Page 14 Thursday, January 11, 2007 4:34 PM 1 Getting Started Controls and Features To adjust the focus (pP25) To adjust the size of the image (pP25) z This unit comes with buffer material that cushions the lens. Remove the buffer material before use. z Do not throw away the buffer material, retain for future use.
DLA-HD1D_EN.
DLA-HD1D_EN.
DLA-HD1D_EN.book Page 17 Thursday, January 11, 2007 4:34 PM ENGLISH Getting Started How to Use the Remote Control Loading Batteries Effective Range of Remote Control Unit When directing the remote control toward this unit Basic Operation happens, replace the batteries. Insert the batteries according to the +- marks. z Be sure to insert the - end first. z If an error occurs when using the remote control, remove the batteries and wait for 5 minutes.
DLA-HD1D_EN.book Page 18 Thursday, January 11, 2007 4:34 PM Preparation 2 Selecting Connecting Devices z Do not turn on the power until connection is complete. z The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be connected. z For audio output, connect the device to an amplifier. z The images may not be displayed depending on the devices and cables to be connected.
DLA-HD1D_EN.
DLA-HD1D_EN.
DLA-HD1D_EN.book Page 21 Thursday, January 11, 2007 4:34 PM ENGLISH Getting Started Connecting via SCART-RCA Cable This unit SCART terminal To RGB video and sync signal input terminals z Set ACOMPB in the setting menu to ASCARTB.
DLA-HD1D_EN.book Page 22 Thursday, January 11, 2007 4:34 PM 2 Preparation Installing the Projector and Screen Install this unit and the screen. Place this unit and the screen perpendicular to each other. Failing to do so may give rise to trapezoidal distortion of the projected image.
DLA-HD1D_EN.book Page 23 Thursday, January 11, 2007 4:34 PM ENGLISH Adjust such that the projected image is in the center of the screen Moves the image up or down Preparation Moves the image to the left or right Getting Started B Basic Operation z It may be necessary to set APixel AdjustB in the setting menu after adjusting the image position. (pP30 - J) Screen Size and Projection Distance Determine the distance from the lens to the screen to achieve your desired screen size. This unit uses a 2.
DLA-HD1D_EN.book Page 24 Thursday, January 11, 2007 4:34 PM 3 Basic Operation Projecting Image This section describes the basic operations to project input images on the screen. Preparation z Remove the lens cap. A Insert the power plug to the power outlet A Connect to this unit B Connect to the power outlet Light on (Red) Power Cord (Supplied) B Turn on the power Light on (Green) z You can also press the [STANDBY/ON] button on the unit to turn on the power.
DLA-HD1D_EN.book Page 25 Thursday, January 11, 2007 4:34 PM ENGLISH Adjust the image size (zoom) TIPS Smaller Bigger You can hide the image temporarily Getting Started E You can hide the image temporarily. F Adjust the focus Green light blinks when the image is hidden Turn the ring and adjust z Press the [HIDE] button again to display image. z The power cannot be turned off when the image is temporarily hidden.
DLA-HD1D_EN.book Page 26 Thursday, January 11, 2007 4:34 PM 3 Basic Operation Convenient Features during Projection You can change the screen size of the projected image or hide the surrounding area of an image for which quality at the outer area has deteriorated. Setting the Screen Size The projected image can be set to a most appropriate screen size (aspect ratio). z The screen size can also be set from AAspectB of the setting menu.
DLA-HD1D_EN.book Page 27 Thursday, January 11, 2007 4:34 PM ENGLISH Mask the image a Display the setting menu MEMO Image Setup Video Install. Func. Info. z Masking is available only when high Getting Started B definition images are input. Image Adjust Color Temp. Gamma Offset b Select ASetupB g AMaskB Image Setup Video Install. Func. Info. Install. Func. Info. Preparation Pixel Adjust ASELECT Image Profile 2.
DLA-HD1D_EN.book Page 28 Thursday, January 11, 2007 4:34 PM 4 Settings Setting Menu Projected images can be adjusted to a desired view by changing the default settings. Procedures for Menu Operation Example: When AAspectB is changed from A4:3B to A16:9B A Display the setting menu Image Setup Video Install. Func. Info. Setup Video Install. Func. Info. Install. Func. Info. Image Adjust Color Temp.
DLA-HD1D_EN.book Page 29 Thursday, January 11, 2007 4:34 PM ENGLISH Item values shown in are factory settings. z Items that can be configured differ according to the input signals. Getting Started Setting Menu Image>Image Adjust A Contrast Adjusts the contrast of the projected image. Preparation (Black) b30 f 30 (White) B Brightness Adjusts the brightness of the projected image. (Darken) b30 f 30 (Brighten) C Color Adjusts the color density of the projected image.
DLA-HD1D_EN.book Page 30 Thursday, January 11, 2007 4:34 PM 4 Settings Setting Menu (Continued) Image>Gamma H Gamma Sets the gradation characteristics of the projected image. Normal For normal circumstances, select this setting. A Sets gamma to AAB. B Sets gamma to ABB. C Sets gamma to ACB. z ANormalB is suitable for normal circumstances but AAB, ABB or ACB can be selected according to your preference. z This setting can also be configured from the remote control.
DLA-HD1D_EN.book Page 31 Thursday, January 11, 2007 4:34 PM ENGLISH L Profile Memory Registers or deletes image profiles. Registers image profile in AUser1B. Save User2 Registers image profile in AUser2B. Save User3 Registers image profile in AUser3B. Clear User1 Returns image profile in AUser1B to factory setting (natural). Clear User2 Returns image profile in AUser2B to factory setting (natural). Clear User3 Returns image profile in AUser3B to factory setting (natural).
DLA-HD1D_EN.book Page 32 Thursday, January 11, 2007 4:34 PM 4 Settings Setting Menu (Continued) Video>HDMI Q HDMI Configures the input signals of the HDMI input terminal. Auto Automatically configures input signals. YCbCr(4:4:4) Select this when Y Cb Cr (4:4:4) video signals are input. YCbCr(4:2:2) Select this when Y Cb Cr (4:2:2) video signals are input. RGB Select this when RGB video signals are input. z This setting is available only when projecting the HDMI input.
DLA-HD1D_EN.book Page 33 Thursday, January 11, 2007 4:34 PM ENGLISH V Menu Position Sets the display position of the menu. Displays menu on the upper left of the screen. Upper center Displays menu on the upper center of the screen. Upper right Displays menu on the upper right of the screen. Left center Displays menu on the left center of the screen. Center Displays menu on the center of the screen. Right center Displays menu on the right center of the screen.
DLA-HD1D_EN.book Page 34 Thursday, January 11, 2007 4:34 PM 4 Settings Setting Menu (Continued) Install.>High Altitude Mode a High Altitude Mode Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level). On Activate. Off Do not activate. Func.>Back Color b Back Color Configures the screen color displayed when there is no input signal. Blue Sets screen color to ABlueB. Black Sets screen color to ABlackB. Func.
DLA-HD1D_EN.book Page 35 Thursday, January 11, 2007 4:34 PM ENGLISH g Language Sets the language of the menu display. Japanese English English Deutsch German Español Spanish Italiano Italian Français French Português Portuguese Nederlands Dutch Svenska Swedish Norsk Norwegian 中文 Chinese (Simplified) h Input Displays the currently selected video input. i Source Displays the types of the current input video signals. Basic Operation Info. Preparation 日本語 Getting Started Func.
DLA-HD1D_EN.book Page 36 Thursday, January 11, 2007 4:34 PM 4 Settings Customizing Projected Images You can adjust the projected image to a desired image quality and register the adjusted value. (Image profile) Besides the default ACinemaB, ANaturalB and ADynamicB settings, there are 3 more types of user-defined settings for image profile. Changing the Default Image Profile Values AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.
DLA-HD1D_EN.book Page 37 Thursday, January 11, 2007 4:34 PM ENGLISH A CAUTION Select the image profile Getting Started Registering User-defined Image Profiles z Adjustment settings of image B Adjust image quality z See AChanging the Default Image Profile ValuesB for procedures on adjusting the image quality. (pP36) C Preparation quality will not be registered if other image profiles are selected before registering these settings. Register the image profile Image Setup Video Install. Func.
DLA-HD1D_EN.book Page 38 Thursday, January 11, 2007 4:34 PM 5 Troubleshooting Troubleshooting Before sending the unit to your authorized dealer for repair, check the following points. The following situations are not malfunctions. You do not need to worry under the following situations if there is no abnormality on the screen. z Part of the top surface or front of the unit is hot. z A creaking sound is heard from the unit. z An operating sound is heard from the internal of the unit.
DLA-HD1D_EN.book Page 39 Thursday, January 11, 2007 4:34 PM ENGLISH Is the focus correctly adjusted? Adjust accordingly using the focus adjustment ring. pP25 Is the unit placed too near or too far away from the screen? Set the unit at a correct distance from the screen. pP22, 23 Has setting been performed for screen mask? Set the AMaskB in the setting menu to AOffB.
DLA-HD1D_EN.book Page 40 Thursday, January 11, 2007 4:34 PM 5 Troubleshooting What to Do When These Messages Are Displayed Message Cause (Details) No device is connected to the input terminal. The input terminal is connected but there is no signal. COMP No input gInput the video signals. A video signal that cannot be used in this unit has been input. HDMI-2 Frequency of input signal is out of range. gInput video signals that can be used.
DLA-HD1D_EN.book Page 41 Thursday, January 11, 2007 4:34 PM ENGLISH The accumulated lamp time or warning mode of this unit is displayed by the indicators. For information on indicator display during normal operation, see AControls and FeaturesB (pP14). Indicator No.
DLA-HD1D_EN.book Page 42 Thursday, January 11, 2007 4:34 PM 5 Troubleshooting Replacing the Lamp The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit. z When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the indicator. (pP40, 41) Procedure for Lamp Replacement CAUTION z Pull the power plug from the power A Remove the lamp cover z Remove the screws with a + screwdriver. outlet.
DLA-HD1D_EN.book Page 43 Thursday, January 11, 2007 4:34 PM ENGLISH Install the new lamp unit CAUTION z Use only genuine replacement E MEMO Tighten the screws of the lamp unit Preparation parts for the lamp unit. Also, never attempt to re-use an old lamp unit. This may cause a malfunction. z Do not touch the surface of a new lamp. This may shorten the lamp life and cause lamp blowout. Getting Started D After Replacing the Lamp z Fasten the screws with a + screwdriver.
DLA-HD1D_EN.book Page 44 Thursday, January 11, 2007 4:34 PM 5 Troubleshooting Replacing the Lamp (Continued) Resetting Lamp Time After installing a new lamp unit, reset the lamp time. A Insert the power plug to the power outlet Light on (Red) B Reset lamp time z Press in the order as shown. Press for 2 seconds or more z The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3 seconds. After that, the unit switches to standby mode.
DLA-HD1D_EN.book Page 45 Thursday, January 11, 2007 4:34 PM ENGLISH Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. A Remove the inner filter Lift up while pushing the claw CAUTION Getting Started Cleaning and Replacing the Filter z Pull the power plug from the power outlet. Preparation MEMO Clean the filter z Replace with a new filter. A dirty filter will dirty the internal parts of the unit and cause shadows on the video image.
DLA-HD1D_EN.book Page 46 Thursday, January 11, 2007 4:34 PM 6 Others RS-232C Interface Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross cable (D-Sub 9 pin). RS-232C Specifications Pin No. Signal Operation Signal Direction 2 RxD Receive data This unit PC 3 TxD Transmit data This unit PC 5 GND Signal ground b 1, 4, 6 b 9 N/C b b This unit z PC refers to the controller such as a personal computer.
DLA-HD1D_EN.book Page 47 Thursday, January 11, 2007 4:34 PM ENGLISH Operating command and data (Binary code) Command Type 0000 Connection check 5057 Power supply Input 5243 Remote Control Checks whether communication is available between this unit and the PC during standby. During standby 31: Turns on the power. During power on 30: Turns off the power. (Standby mode) During power on 30: S-VIDEO 31: VIDEO 32: COMP.
DLA-HD1D_EN.book Page 48 Thursday, January 11, 2007 4:34 PM 6 Others RS-232C Interface (Continued) Remote control code z Binary code is sent during communication.
DLA-HD1D_EN.book Page 49 Thursday, January 11, 2007 4:34 PM ENGLISH Getting Started RS-232C Communication Examples This section shows the communication examples of RS-232C. Operating command Type Command Description Power (On) PC This unit: 21 89 01 50 57 31 0A This unit PC: 06 89 01 50 57 0A When power is turned on from standby mode Power (Off) PC This unit: 21 89 01 50 57 30 0A This unit PC: 06 89 01 50 57 0A When power is turned off (standby mode) from power-on mode Input (COMP.
DLA-HD1D_EN.book Page 50 Thursday, January 11, 2007 4:34 PM 6 Others Copyright and Caution About Trademarks and Copyright z HDMI, HDMI logo and high definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC. z This product uses Ricoh TrueType fonts manufactured and sold by Ricoh Co., Ltd. Caution D-ILA Device Characteristics Maintenance Procedures Do not project still pictures or pictures that have still segments for a long period of time.
DLA-HD1D_EN.book Page 51 Thursday, January 11, 2007 4:34 PM ENGLISH Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention during emergencies including earthquakes. When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw holes (M5 screws) to mount.
DLA-HD1D_EN.book Page 52 Thursday, January 11, 2007 4:34 PM 6 Others Specifications Product Name D-ILA Home Theater Projector Model Name DLA-HD1 Display Panel/Size D-ILA device 1 2 / 0.7" (1920 pixels c1080 pixels) c 3 (Total no. of pixels: Approx. 6.22 million) Projection Lens 2.0x manual zoom lens (1.4: 1 f 2.8: 1) (Zoom/Focus: Manual) Light-source Lamp 200 W Ultra-high pressure mercury lamp [Part No.: BHL5009-S] Screen Size Approx.
DLA-HD1D_EN.
DLA-HD1D_EN.
