User Manual

Specifications
Product Name D-ILA Projector
Model Name DLA-NX9B, DLA-NX7B, DLA-NX5B
Display Panel/Size D-ILA device *1, 2
0.69” 4K D-ILA (4096 x 2160 pixels) x 3
Projection Lens 2.0 x power zoom lens, motorized zoom and focus
Light-source Lamp 265 W ultra-high pressure mercury lamp [product no.: PK-L2618U
Average lifespan: 4500 hours (“Low” mode)
Screen Size Approx. 60” to 280” (Aspect ratio of 16:9) k
Approx. 60” to 200” (Aspect ratio of 16:9) l m
Brightness 2200 lm k, 1900 lm l, 1800 lm m
Projection Distance Refer to P. 79.
Input Compatibility Signal Refer to P. 83.
Display Resolution 8192 x 4320 pixels k *3, 4096 x 2160 pixels l m
Input Terminal HDMI Input Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4
Output Terminal Trigger Terminal Single, Ø 3.5 mm DC Power Jack (E)
DC OUT 12 V, 0.1 A
3D synchro Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin)
Control Terminal RS-232C Terminal Single, D-sub 9-pin (male) (external control)
LAN Terminal Single, RJ-45 plug, 10BASE-T/100BASE-TX
Service Terminal SERVICE Single (USB Type A) *5
Power Requirements AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption 400 W (during normal standby: 1.5 W *6, during Eco Mode standby:
0.3 W *7)
Operation Environment Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60
°C
Installation Height Below 5,000 ft (1,524 m)
Dimensions (Width x Height x Depth) 500 mm x 234 mm x 518 mm (19-3/4 in x 9-1/4 in x 20-3/8 in) (including
feet) k
500
mm x 234 mm x 495 mm (19-3/4 in x 9-1/4 in x 19-1/2 in) (including
feet) l m
Mass 21.8 kg (48 lb) k, 19.8 kg
(43.6 lb) l, 19.6 kg (43.2 lb) m
Accessories Refer to P. 9.
*1 D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*2 D-ILA
devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 During 3D playback, the display resolution is 4096 x 2160 pixels.
*4 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
*5 Exclusively for firmware update.
*6 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
*7 “During standby” refers to Eco Mode standby (P. 61).
0
Design and specifications are subject to change without prior notice.
0
Please
note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
77
Others