User Manual

Picture Adjust
Content Type
Changes the available picture modes according to the type of content for viewing.
Æ “Setting the Picture Mode” (P. 32)
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ “Setting the Picture Mode” (P. 32)
More Settings
Changes the preconfigured “Picture Mode” setting.
LD Power
For switching the brightness of the LD block.
Setting Description
Low Brightness (low)
Mid Brightness (mid)
High Brightness (high)
0
The factory setting varies with the “Picture Mode”.
Dynamic CTRL
Expands the dynamic range of video expression through controlling the brightness of the light source based on image
analysis.
Æ “Reducing the Delay and After-image of Fast-moving Images (Motion Control)” (P. 52
)
Setting Description
Off Does not control.
Mode 1
Expands the dynamic range of video expression.
With weaker control than “Mode 2”, the change is gentle.
Mode 2
Expands the dynamic range of video expression.
With stronger control than “Mode 1”, it will change clearly according to the scene.
* This item is not available when “Low Latency” is set to “On”.
Aperture
For changing the brightness through controlling the aperture.
0
Setting range: -15 (stops down) to 0 (opens up)
57
Adjust/Set