User Manual

Table Of Contents

Noise is heard

Check Action Refer to

Is the exhaust vent blocked?

Is the unit used near a heater or air-

conditioner?

Check the installation condition of the projector.

When the

surrounding temperature of the projector is high,

the fan revolution speed increases to protect the projector

unit, hence a louder operating sound.

P. 20

Are you viewing 3D video images? “LD Power” is set automatically to “High” to ease viewing

of 3D video images, hence a louder fan operating sound.

If you are bothered by the sound, set it to “Low”.

P. 57

Is “LD Power” set to “High”? Setting “LD Power” to “High” increases the fan rotation

speed, and noise would be louder as a result.

P. 57

Is the “8K e-shift” setting for “MPC”

switched?

Switching sound is generated. This is not a malfunction.

—

Unable to connect to LAN terminal

Check Action Refer to

Has a network password been

configured? (DLA-NZ9BK,

DLA-NZ8BK,

DLA-NZ7BK, DLA-RS4100K, DLA-

RS3100K, DLA-RS2100K)

Configuration of a network password is necessary before

connecting to the LAN terminal. Configure the network

password.

P. 79

There are small black or colored dots on the screen

The D-ILA device is manufactured using high-precision technologies, but there may be some (less than 0.01%) missing

pixels or pixels that remain permanently lit. This is not a malfunction.

Troubleshooting