User's Manual

39
Getting Started Preparation Basic Operation Settings Troubleshooting Others
ENGLISH
D Install the new lamp unit
E Tighten the screws of the lamp unit
F Attach the lamp cover
z Fasten the screws with a + screwdriver.
z Insert the top part (with 2 claws) of the lamp cover into the unit.
z Fasten the screws with a + screwdriver.
z Use only genuine replacement
parts for the lamp unit. Also, never
attempt to re-use an old lamp unit.
This may cause a malfunction.
z Do not touch the surface of a new
lamp. This may shorten the lamp
life and cause lamp blowout.
After Replacing the Lamp
z
Do not place the removed lamp
unit at locations reachable by
children or near combustible items.
z Dispose used lamp units in the
same way as fluorescent lamps.
Follow your local community rules
for disposal.
CAUTION
MEMO
Claws
DLA-RS1_EN.book Page 39 Wednesday, January 24, 2007 9:23 AM
Downloaded from www.Manualslib.com manuals search engine