OperationManual

High Altitude Mode
For setting the high altitude mode to “On” or “Off”.
Set
to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).
Hide Mode x y z 5 6 7
For reducing the power consumption through suppressing the current supply for the LD block when the [HIDE] button
is pressed to hide the image temporarily.
Setting Description
Off
The illumination supply remains on when the [HIDE] button is pressed to hide the
image.
On
The illumination supply is turned off when the [HIDE] button is pressed to hide the
image.
Back-up Settings
For exporting or importing the projector settings using a commercially available USB flash drive.
0
Current
lens control information (focus, zoom and shift) and the lens control information (focus, zoom and shift) saved
in the individual Installation Modes are not exported or imported.
0
Network passwords are not exported or imported.
CAUTION
Take note of the following when using a USB flash drive.
0
Use a 1 GB or more, FAT32 format drive.
0
Make sure there are no other folders or files.
0
Do not turn off the main unit or remove the USB flash drive while it is running. Doing so may cause the projector to
malfunction.
0
Do not change the file name.
Export Settings
For exporting the projector settings to a USB flash drive.
*
If there is not enough free space on the USB flash drive, the settings may not be exported.
* Information such as date and time created is not reflected in the file created during export.
CAUTION
0
Multiple settings cannot be exported to the same USB flash drive. If the data already exists in the USB flash drive,
it will be overwritten.
Import Settings
For exporting the projector settings from a USB flash drive and applying to the projector.
*
Once the settings have been imported, the projector and all LED indicators will turn off.
To turn on the power again, use the A button on the unit. Alternatively, press any button on the remote control once
to put it to Standby then press the C [ON] button on the remote control.
CAUTION
Importing the settings will overwrite the current settings.
90
Adjust/Set