Operation Manual
Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth.
1
Press the [MPC] button to display the
adjustment menu
0
You can also perform setting from “Picture
Adjust”"“MPC Level” in the menu.
.
>>
MENU
BACK
0
0
0
0
PICTURE MODE
FILM CINEMA ANIME.
NATURAL
THX USER
ADVANCED
MENU
3D
FORMAT
PIC.
ADJ.
COLOR
TEMP.
GAMMA
P. A N A LY Z E R
MPC
Back
Operate
Select
Exit
Auto
On
Before Reset
NR
Smoothing
Dynamic Contrast
Enhance
Original Resolution
4K e-shift
MPC Level
Picture Adjust
2
Make adjustments according to your
preference
based on the setting of the
selected “Picture Mode”
* The factory setting varies with the “Picture
Mode”.
Item Setting Description
4K e-shift On (4K)/Off
(2K)
Switches the display
resolution.
Original
Resolution
Auto/4K/
1080p
For selecting a resolution for
the content you are viewing.
Enhance* 0 to 10 Enhances the sharpness of
the image.
Dynamic
Contrast
0 to 10 Enhances the contrast of the
image.
Smoothing 0 to 10 Enhances the blurriness of
the image for a softer effect.
NR 0 to 10 For reducing the noise of the
video image.
* In the case of 4K 50/60p and other input signals, the
respective setting values are saved.
0
In
the default “Original Resolution” setting (“Auto”), the
resolution is set automatically.
0
By increasing the setting range, you can expect
enhanced effects.
0
Images are displayed in the original resolution (2K)
when “4K e-shift” is set to “Off”.
0
“Original
Resolution”, “Enhance”, “Dynamic Contrast”,
and “NR” can be adjusted even when “4K e-shift” is set
to “Off”.
0
“4K e-shift” is fixed at “On” during 4K signal input.
0
“Original Resolution” is fixed at “Auto” during 4K
50/60p
signal input. “Dynamic Contrast”, “Smoothing”
and “NR” are grayed out.
0
“4K e-shift” is fixed at “Off” during 3D signal input.
3
Press the [MENU] button to exit
Toggling between the States before
and during Adjustment
Pressing
the [HIDE] button on the remote control enables
you to toggle between the states before adjustment and
during adjustment.
34
Adjust/Set