Owner's Manual
Table Of Contents
- Instructions
- Getting Started
- Set up
- Operate
- Adjust/Set
- Maintenance
- Troubleshooting
- Others
- Quick Start Guide
- External Command Communication Specification
- 1 Outline
- 2 Interface
- 3 Protocol
- 4 Command control
- 4.1 NULL command
- 4.2 Power [PoWer]
- 4.3 Input [InPut]
- 4.4 Remote control pass-through [RemoteCode]
- 4.5 Setup [SetUp]
- 4.6 Gamma data of Gamma table “Custom 1/2/3” [GammaRed, Green, Blue]
- 4.7 Panel Alignment (zone) Data [Panel Alignment(Zone) Red, Blue]
- 4.8 Source Asking [SourCe]
- 4.9 Model status asking [MoDel]
- 4.10 Adjustment [AdjustmentCommand]
- Command code
- Parameter1
- Parameter2
- 4.10.1 Special data
- Special data
- Picture mode
- Color Profile
- Color Temp. Table Data
- Color Temp. Correction Data
- Gamma Table Data
- Gamma Correction Data
- Dynamic Control Data
- Color Management Data
- Low Latency Data
- Clear Motion Drive Data
- Motion Enhance Data
- LD Power Data
- Graphic Mode Data
- HDMI Input Level Data
- HDMI Color Space Data
- HDMI 2D/3D Data
- Aspect Data
- Mask Data
- Lens Control(Focus Near, Focus Far, Zoom Tele, Zoom Wide, Shift Left, Shift Right, Shift Up, Shift Down) Data
- Lens Image Pattern, Lens Lock, Screen Adjust, Uniformity Correction Data
- Installation Style Data
- Anamorphic Data
- Panel Alignment Switch Data
- High Altitude mode
- Back Color Data
- Menu Position Data
- Source Display
- Language Data
- Trigger Data
- Off Timer Data
- Eco Mode Data
- Control 4 Data
- Input Data
- Source Data
- Deep Color Data
- Color Space Data
- Colorimetry Data
- HDR Data
- 4.10.2 Special2 Data
- 4.10.3 Special3 Data
- 4.10.4 Special9 Data
- 4.10.5 Special10 Data
- 4.10.6 Special14 Data
- 4.10.7 Operation
- 4.10.8 Reference
- LAN setup [Lan Setup]
- Screen Codes
- Safety Precautions
Selecting an Image Quality According to the
Video Type
Setting the Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
1
Press the [PICTURE MODE] button, and use the [JK] keys
to select and set the desired “Picture Mode”
0
You can also perform the setting by pressing the [MENU] button to display
the menu followed by selecting “Picture Adjust” " “Picture Mode”.
0
You
can also press the “Cinema”, “HDR” or “Natural” button to set the Picture
mode directly.
0
You
can configure more detailed setting items by pressing the [MENU] button
to display the menu, followed by selecting “Picture Adjust” " “Picture Mode”
and pressing the [OK] button. (P. 44)
Item Description
Natural
Image quality that focuses on natural color and gradation
reproduction. Suitable for drama footage, etc.
Cinema Reproduces the image in vivid colors. Suitable for all
movies.
HDR*1 Making full use of the wide color gamut and contrast, this
mode is suited for viewing HDR contents such as Ultra HD
Blu-ray.
Film
Reproduces faithfully the texture of movie films.
THX*2 Image quality certified by THX.
User 1 to User 6 Enables user-defined image quality data to be saved and
retrieved.
*1 If HDR (high dynamic range) signal is detected, the picture mode will
automatically switch to “HDR”.
*2 For
“THX”, the optimal settings for 2D and 3D signals are stored separately and
applied automatically according to the selected mode.
0
Edited settings will also be saved separately.
0
No changes will be made to the Picture mode name.
SETTING MEMORY
MODE 1 MODE 2 MODE 3
ANAMO.
HDR
C.M.D.
COLOR
PROFILE
GAMMA
SETTINGS
PICTURE
MODE
1
31
Adjust/Set