Operation Manual

ManualsBrandsJVC ManualsVideo projector projectorDLA-RS66E

Remote control does not work

Check Action Refer to

Are the batteries correctly loaded? Match the polarities (t s) correctly when loading the

batteries.

p. 18

Are the batteries exhausted? Replace with new batteries. p. 18

Is there an obstructing object between

the remote control and remote sensor?

Remove any obstructing object. p. 18

Is the remote control held too far away

from the unit?

Hold the remote control closer to the sensor during use. p. 18

Are the IR (infrared) 3D GLASSES and

3D SYNCHRO EMITTER in use?

As there is a possibility of signal interference, when you are

using the IR (infrared) 3D GLASSES together with the 3D

SYNCHRO EMITTER, try adjusting the orientation of the

3D SYNCHRO EMITTER.

p. 34

Unable to view 3D images

Check Action Refer to

Is the power of the 3D GLASSES turned

on?

If you are using the PK-AG2 or PK-AG33D GLASSES, turn

on the power manually.

Check the

instruction

manual of the 3D

GLASSES and

3D SYNCHRO

EMITTER.

Are the 3D GLASSES charged? Check the battery (charge) of the 3D GLASSES.

Are the 3D GLASSES and 3D

SYNCHRO EMITTER too far away from

each other?

Position them at an appropriate distance.

Is the correct 3D format selected? If the format does not switch automatically, configure 3D

Format in the setting menu.

p. 35

Color does not appear or looks unnatural

Check Action Refer to

Is the AV device properly connected? Connect the AV device properly. p. 22

Is the image correctly adjusted? Adjust “Color” and “Tint” accordingly. p. 50

Is the color space of the input signal

correctly set?

Set “Color Space” properly. p. 53

Video image is fuzzy

Check Action Refer to

Is the focus correctly adjusted? Adjust the focus. p. 28

Is the unit placed too near or too far away

from the screen?

Set the unit at a correct distance from the screen. p. 77

Video images are missing

Check Action Refer to

Has screen mask been configured? Set “Mask” to “Off”. p. 54

Is the display position misaligned? Alter the “Picture Position” value so that the entire image

appears on the screen.

p. 54

Troubleshooting