Operation Manual

Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the foot.
Lift the unit and adjust the foot (x4).
.
Contract
Extend
Foot
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift
the image upward/downward or to the left/right. Set it to
your preferred position.
.
90
80
70
60
50
40
30
20
10
0
10 3020 40
Horizontal lens shift (%)
Vertical lens shift (%)
Lens shift Range
Up to about 80% of the
projected image
Horizontal Position: 0 % (Center)
Vertical Position
Up to about 34% of the
projected image
Vertical Position: 0% (Center)
Horizontal Position
■
■
■
Lens shift range
0
The maximum vertical shift varies with the amount of
horizontal shift. Similarly, the maximum horizontal
shift also changes with the amount of vertical shift.
0
The values on the graph are intended as a guide. Use
them for reference during installation.
0
To adjust the screen position, it is recommended to
wait till the position becomes stable after projection
before adjusting. The position may changed after
projection depending on the attitude of the projector.
18
Set up