OperationManual

Precautions during Mounting
Securing (mounting) the projector
0
Make sure to
secure the main unit to prevent accidents
such as during an earthquake.
Securing with screws
Air Inlets
4 Locations
Remove the foot (x4) at the bottom, and fasten using the
screws (M5 screws, 20 to 30 mm).
* Using screws other than those designated may cause
the unit to break down.
* Leave a clearance of at least 10 mm from the bottom
surface of the unit to allow it to take in cool air.
Securing the projector (ceiling mount)
0
Be sure to ask your dealer to install the unit for you.
Installing the unit on your own may cause the unit to
fall resulting in injury.
0
Take the necessary actions to prevent the main unit
from falling off such as during an earthquake.
0
Regardless
of the
warranty period, JVC is not liable for
any product damage caused by mounting the unit with
non-JVC ceiling fittings or to an environment that is not
suited for ceiling mount.
0
When using the unit with it suspended from a ceiling,
pay attention to
the surrounding temperature. When a
heater is in use, the temperature around the ceiling
may be higher than expected.
0
To attach the
unit to the ceiling mount bracket, set the
torque between the range of 1.5N m to 2.0N m.
Tightening with torque exceeding the above range
may cause damage to the unit, which may result the
unit to fall.
17
Set up