OperationManual

Connecting the Projector
0
Do not turn on the power until connection is complete.
0
The
connection
procedures differ according to the device used. For details, please refer to the instruction manual of
the device to be connected.
0
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
audio output device, such as an amplifier or speaker.
0
The images may not be displayed depending on the devices and cables to be connected.
Use only HDMI cables (sold separately) that are HDMI-certified.
0
Some cables cannot be connected to this unit due to the size of their connector cover.
Connecting to the HDMI Input Terminal (Digital Input)
Connecting via HDMI cable
HDMI Output Terminal
Laptop, etc.
HDMI Cable (Sold Separately)
This Unit
To [HDMI 1] or [HDMI 2] input terminal
Or both [HDMI1] and [HDMI2]
0
If noise occurs, move the laptop away from this unit.
0
For a transmission bandwidth in compliance with the HDMI standard, a cable which supports 340 MHz bandwidth
is recommended.
0
If the video is not displayed, try to reduce the length of the cable.
Connecting via HDMI-DVI conversion cable

HDMI-DVI Conversion Cable (Sold Separately)
To [HDMI 1] or [HDMI 2] input terminal
This Unit
DVI Output Terminal
Desktop PC, etc.
Or both [HDMI1] and [HDMI2]
0
If noise occurs, move the desktop PC away from this unit.
0
If the video is not displayed, try to reduce the length of the cable.
19
Set up