OperationManual

Operation procedure for Whole Adjust (Fine)
For making
general adjustments on the misalignment of the entire screen using “Adjust(Pixel)”, followed by making fine
adjustments.
A
Set “Adjust Area” to “Whole”
B
Select “Adjust Color” and “Adjust Pattern Color”
C
Select Adjust(Fine), and press the [OK] button
0
The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
Color A.
GAMMA
BACK
ADJUST.
COLOR.
Color P.
LENS.AP
A. Area
PIC.
TEMP ADJ.
H 0 ( 0 / 0 )
V 0 ( 0 / 0 )
Red
Pixel Adjust
Whole Adjust (Fine)
V (Vertical)
H (Horizontal)
Fine Window
Adjustment Pattern
Back
Operate
Select
D
Press the [OK] button to enter the Adjustment mode
E
Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
0
The adjustment setting appears at the center of the Fine window.
H −20 （−20 / −20）
V 5 （ 5 / 5）
Color A.
GAMMA
BACK
ADJUST.
COLOR.
Color P.
LENS.AP
A. Area
PIC.
TEMP ADJ.
H 0 ( 0 / 0 )
V 0 ( 0 / 0 )
Red
Pixel Adjust
Whole Adjust (Fine)
Indicates the maximum and
minimum misalignment value of
the entire screen.(Max. / Min.)
Adjustment Setting
Remote Control Operation
Guide
Color for
Adjustment
Pixel Adjustment Setting
Back
Operate
Select
F
After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
MEMO
0
If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are “31”, you
cannot select a value that is larger than the displayed setting even when the adjustment setting is lower than the
maximum value.
0
If the minimum overall screen misalignment is “-31”, you cannot select a value that is smaller than the displayed
setting even when the adjustment setting is higher than the minimum value.
35
Adjust/Set