OperationManual

Display Mode
For managing the e-shift status v and the lighting condition of the light sources.
Setting Description
Normal Only the laser light source lights up.
NV Only the IR light source lights up.
e-shift v This is the mode for displaying e-shift. Only the laser light source lights up.
NV(e-shift) v This is the mode for displaying e-shift. Only the IR light source lights up.
NV(FS) The laser light source and IR light source light up alternately frame by frame.
NV(e-shift FS) v This is the mode for displaying e-shift. The laser light source and IR light source
light up alternately frame by frame.
3D This is the mode for displaying 3D videos.
0
The selectable “Display Mode” settings vary according to input signal.
List of selectable “Display Mode” according to input signal v
Input Signal Display Mode
Single (DP1-DP4) 24, 25, 30, 50, 60 Hz Normal / NV
Dual - stripes 50, 60 Hz
Quad - stripes 60 Hz
Quad - cross
Dual - frame sequential 100 Hz Normal / NV / e-shift / NV(e-shift) / 3D
Dual - frame sequential 100 Hz Normal / NV / e-shift / NV(e-shift) / 3D
Dual - stripes 120 Hz Normal / NV / e-shift / NV(e-shift) / NV(FS) /
NV(e-shift FS) / 3D
Quad - stripes
Quad - cross
Dual - frame sequential
Quad - frame sequential
No signal Normal / e-shift
Out of range Normal
List of selectable “Display Mode” according to input signal w
Input Signal Display Mode
Single (DP1-DP4) 24, 25, 30, 50, 60 Hz Normal / NV
Dual - stripes 50, 60 Hz
Quad - stripes
60 Hz
Quad - cross
Dual - stripes 100 Hz
120 Hz
Normal / NV / NV(FS) / 3D
Quad - stripes
Quad - cross
Dual - frame sequential
Quad - frame sequential
No signal Normal
Out of range Normal
36
Adjust/Set