OperationManual

List of selectable “Display Mode” according to input signal H
Input Signal Display Mode
Single (DP1-DP4) 24, 25, 30, 50, 60 Hz Normal / NV
Dual - stripes 50, 60 Hz
Quad - stripes 60 Hz
Quad - cross
Dual - frame sequential 100 Hz Normal / NV / 3D
Dual - stripes 120 Hz Normal / NV / NV(FS) / 3D
Quad - stripes
Quad - cross
Dual - frame sequential
Quad - frame sequential
No signal Normal
Out of range Normal
e-shift polarity v
For switching the polarity of e-shift.
Setting Description
Positive Activates e-shift using positive polarity signal.
Negative Activates e-shift using negative polarity signal.
0
This function cannot be used except when “Display Mode” is set to “e-shift”, “NV(e-shift)”, “NV(e-shift FS)” or “3D”.
IR Enhance Mode
For switching the function to support the power of the IR light source.
Setting Description
Off Disables the support function.
On Enables the support function.
37
Adjust/Set