OperationManual

3D Setting
For performing 3D settings.
3D Format
For selecting the method to detect 3D signal.
When “3D” is selected, the L and R sync signals are output from the Sync Out terminal. (
P. 14)
Setting Description
2D Detects the input signal as 2D signal.
3D Detects the input signal as 3D signal.
Crosstalk Cancel
This is the function to correct the crosstalk between the left and right images.
0
Setting range: -8 to 8
Polarity
This is the function to switch the signal polarity output from Sync Out for synchronizing the glasses.
Setting Description
Positive Sets the signal polarity for synchronization to positive.
Negative Sets the signal polarity for synchronization to negative.
Sync Phase
This is the function to adjust the signal phase output from Sync Out for synchronizing the glasses.
0
Setting range: 0 (0°) to 18 (180°)
34
Adjust/Set