Caution Sheet

The projector should be in the sealed bag for long
The projector should be in the sealed bag for longThe projector should be in the sealed bag for long
The projector should be in the sealed bag for long-
--
-term
term term
term
storage to control humidity level since it has
storage to control humidity level since it has storage to control humidity level since it has
storage to control humidity level since it has
ultraprecision
ultraprecisionultraprecision
ultraprecision devices.
devices.devices.
devices.
Please follow the instruction below when unpacking
Please follow the instruction below when unpacking Please follow the instruction below when unpacking
Please follow the instruction below when unpacking
and packing.
and packing.and packing.
and packing.
CAUTION
For unpacking
For repacking
> Leave the projector in the bag until the temperature of the
projector becomes equal to the ambient temperature.This
procedure is needed to prevent condensation.
> Some packets of desiccant (absorbent material) are put
behind the front panel in the projector.
> Make sure to remove them when you use the projector.
Refer to the caution sheet attached on the front panel of the
projector for details.
> Do the sealing up packing like the first state when you do long-term
preservation.
> Put the packets of desiccant back to the original position.
> If the storage term has been over one year, change the
desiccant(Part No. LC43436-001A). Start month of the desiccant
use is noted on the carton box of the projector for confirmation.
> Seal the opening of the poly bag with the tape for packing
after packing the projector.
> Absorb air in the bag with a cleaner etc.
1212YMY-YM-xx