Owner's Manual

5
Install the new lamp unit
.
Handle
6
Tighten the screws of the new lamp
unit
0
Tighten the screws with a t screwdriver.
.
7
Attach the lamp cover
0
Insert the two tabs at the top and bottom of the
lamp cover into the unit.
0
Tighten the screws with a t screwdriver.
.
MEMO
Usable lamp life
0
When the lamp is used with “Lamp Power” set to
“Low”,
the lamp life on
this unit is approximately 4000
hours. This is the average usable time and not a
guaranteed value.
0
The lamp life may not
reach 4000 hours depending on
the operating conditions.
0
When the lamp has reached
the end of its usable life,
deterioration progresses rapidly.
0
When the video image appears dark, when the color
tone looks unnatural, or when the image flickers,
replace the lamp unit with a new one promptly.
Purchasing a lamp unit
Please consult your authorized dealer or nearby service
center.
0
Lamp unit
Product no.: PK-L2312U
* Not suitable for household room illumination.
*
Lamps with a different product number or those for
other projector models cannot be used.
Information about the lamp
An ultra-high pressure mercury lamp with a high internal
pressure is used in the projector.
Due to the characteristics of this lamp, it may blow out
with a loud noise or go out when it is subject to shock or
after
using
for a prolonged
period of time (the time before
the lamp blows out or goes out varies considerably with
each lamp as well as the operating conditions).
After replacing the lamp
0
Do not place the removed lamp unit at a place that is
within reach by children or anywhere near
inflammable items.
0
Dispose used lamp units in the same way as
fluorescent
lamps. Follow the regulations
of your local
community for disposal.
62
Maintenance